Active filters
Accueil
Catégories >

Categories

Reset this group
Moteur >

Feed

Year

motor base

Fuel

Brand

Displacement

Model

cid

Family

Helix

Off/inboard

Injection

Number of cylinder

Period

room for

Power

transmission type

Cycle

Commercial designation

Attributs >

Brand

Accueil

Accueil

Arrangement product list

KIT JOINTS REMONTAGE EMBASE MERCRUISER ALPHA ONE

RÉF. 28200

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
(1 review)
10.2 €10.20 VAT included
€8.50 VAT excluded

JOINT POPPET MERCURY 27-78690002

RÉF. AP7509

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
2.8 €2.80 VAT included
€2.33 VAT excluded

MERCRUISER SHIFT BUSHING KIT

RÉF. 23/806036A1

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
21.76 €21.76 VAT included
€18.13 VAT excluded

RONDELLE CASQUE EMBASE MERCRUISER 51MM

RÉF. 12/72498

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
1.42 €1.42 VAT included
€1.18 VAT excluded

DURITE ASPIRATION MERCRUISER ALPHA G2 - 19MM

RÉF. 32/4172533

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
15.6 €15.60 VAT included
€13.00 VAT excluded

GOUJON BOL MERCRUISER

RÉF. 16/59579

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
8.02 €8.02 VAT included
€6.68 VAT excluded

RONDELLE MERCRUISER

RÉF. 12/35935

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
2.36 €2.36 VAT included
€1.97 VAT excluded

ECROU EMBASE MERCRUISER 7/16-20

RÉF. 21170

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
(1 review)
3.43 €3.43 VAT included
€2.86 VAT excluded

COLLIER INOX 100-120MM

RÉF. TOR100/13

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
7.14 €7.14 VAT included
€5.95 VAT excluded

JOINT TORIQUE

RÉF. AP0208

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
(1 review)
2.34 €2.34 VAT included
€1.95 VAT excluded

SOUFFLET ECHAPPEMENT EMBASE MERCRUISER

RÉF. AP500

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
35.88 €35.88 VAT included
€29.90 VAT excluded

CLIPS VOIR AP0031

RÉF. DM_CH_54-8M0126505

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

COLLIER INOX 60-80MM

RÉF. TOR60/13

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
5.94 €5.94 VAT included
€4.95 VAT excluded

MERCRUISER SELECTOR LEVER

RÉF. 45518A3

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
36.6 €36.60 VAT included
€30.50 VAT excluded

RONDELLE MERCRUISER

RÉF. 12/39116

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
1.2 €1.20 VAT included
€1.00 VAT excluded

VIS MERCRUISER 10-8M0084649

RÉF. 10/45590

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
3.16 €3.16 VAT included
€2.63 VAT excluded

LEVIER INVERSEUR ALPHA ONE GII

RÉF. 816685

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
81.9 €81.90 VAT included
€68.25 VAT excluded

CONNECTEUR SPEEDO MERCURY

RÉF. 22/860382

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
15 €15.00 VAT included
€12.50 VAT excluded

RACCORD EAU SPEEDO MERCRUISER G2

RÉF. 22/814382

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
8.09 €8.09 VAT included
€6.74 VAT excluded

CLIPS MERCRUISER 54-12994

RÉF. DM_CH_54-12994

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
2.58 €2.58 VAT included
€2.15 VAT excluded

VALVE RESERVOIR HUILE EMBASE MERCRUISER

RÉF. 18920A1

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
103.01 €103.01 VAT included
€85.84 VAT excluded

JOINT TORIQUE

RÉF. 25/48171

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
1.25 €1.25 VAT included
€1.04 VAT excluded

Arrangement product list

BOUCHON DE VIDANGE ET JOINT MERCURY

RÉF. AP2683

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
(1 review)
6.6 €6.60 VAT included
€5.50 VAT excluded

MERCURY BASE DRAIN SEAL

RÉF. 12/19183

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
(1 review)
1.03 €1.03 VAT included
€0.86 VAT excluded

JOINT HUILE MERCURY OEM

RÉF. 26/45577

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
(2 reviews)
2.92 €2.92 VAT included
€2.43 VAT excluded

ROULEMENT

RÉF. 21610

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
54 €54.00 VAT included
€45.00 VAT excluded

ECROU NYLSTOP 7/16-20 MERCURY

RÉF. AP9135

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
4.73 €4.73 VAT included
€3.94 VAT excluded

KIT CALES MERCURY 15-8M0063267

RÉF. DM_CH_8M0063267

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
30.31 €30.31 VAT included
€25.26 VAT excluded

ROULEMENT EMBASE MERCRUISER

RÉF. 21580

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
42.55 €42.55 VAT included
€35.46 VAT excluded

ECROU EMBASE MERCURY 824519 1

RÉF. AP2698

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
6.01 €6.01 VAT included
€5.01 VAT excluded

KIT DE POMPE A EAU MERCURY - MERCRUISER

RÉF. AP1811

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
(1 review)
59.88 €59.88 VAT included
€49.90 VAT excluded

INSERT EMBASE MERCRUISER - 807929A1

RÉF. AP2638

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
33.6 €33.60 VAT included
€28.00 VAT excluded

JOINT SPI MERCRUISER

RÉF. 26/66302

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
12.6 €12.60 VAT included
€10.50 VAT excluded

JOINT TORIQUE MERCURY

RÉF. 25/90011

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
0.4 €0.40 VAT included
€0.33 VAT excluded

MERCURY WATER PUMP SEAL

RÉF. 27/817277

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
3.6 €3.60 VAT included
€3.00 VAT excluded

WATER PUMP SEAL

RÉF. 26/816575A2

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
(1 review)
6.82 €6.82 VAT included
€5.68 VAT excluded

VIS POMPE 10-816928

RÉF. DM_MA_10-816928

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

TURBINE DE REFROIDISSEMENT POMPE A EAU MERCURY

RÉF. 89630

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
(1 review)
23.4 €23.40 VAT included
€19.50 VAT excluded

MERCRUISER WATER MOUNT COUPLER

RÉF. 816597A1

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
(1 review)
16.2 €16.20 VAT included
€13.50 VAT excluded

JOINT TORIQUE

RÉF. 25/21836

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
(1 review)
2.1 €2.10 VAT included
€1.75 VAT excluded

TUBE EAU EMBASE ALPHA GII

RÉF. 23/816583

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
7.62 €7.62 VAT included
€6.35 VAT excluded

SELECTEUR VITESSE EMBASE MERCRUISER

RÉF. 815919A1

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
67.8 €67.80 VAT included
€56.50 VAT excluded

CLIPS 53-29641 @2

RÉF. DM_MA_53-29641

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

BAGUE MERCRUISER 12-77674

RÉF. DM_CH_12-77674

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
0.91 €0.91 VAT included
€0.76 VAT excluded

JOINT SPI MERCRUISER

RÉF. 26/892361

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
12.6 €12.60 VAT included
€10.50 VAT excluded

O-RING

RÉF. 25/36318

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
1.13 €1.13 VAT included
€0.94 VAT excluded

JOINT TORIQUE

RÉF. 25/627021

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
1.13 €1.13 VAT included
€0.94 VAT excluded

GOUJON EMBASE MERCRUISER

RÉF. 16/57984

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
16.34 €16.34 VAT included
€13.62 VAT excluded

KIT JOINTS EMBASE BAS MERCRUISER ALPHA G2

RÉF. 87511

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
54 €54.00 VAT included
€45.00 VAT excluded

Arrangement product list

VOLVO 19923 DASHBOARD BULB

RÉF. DM_FO_19923

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
2.78 €2.78 VAT included
€2.32 VAT excluded

VOLVO LAMP HOLDER

RÉF. DM_FO_808175

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
13.09 €13.09 VAT included
€10.91 VAT excluded
77173 item(s)

BOW THRUSTER 160 KGF - 24V - NOZZLE DIAMETER 250MM

RÉF. DM_VE_BOW16024D | VETUS

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features:

Thrust*: 160kgf

Spark protection available: yes

Power: 7kw / 9.5hp

DC motor: 24V

Recommended boat length (ft - m): 44' to 68' / 15m to 20m

Nozzle diameter (mm-inch): 250mm / 9.88"

Weight without tunnel: 38 kg

For DC system Volt: 24V

Main battery switch: BATSW600 - BPMAIN24

Main fuse: 355

CCE battery in EN value (min/max): 933/1866

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
5339.5 €5,339.50 VAT included
€4,449.58 VAT excluded
VETUS VETUS
Quantity
Voir le produit

BOW THRUSTER 180 KGF - 24V - NOZZLE DIAMETER 250MM

RÉF. DM_VE_BOW18024D | VETUS

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 180kgf

Spark protection available: no

Power (kw-hp): 7 kw / 9.5hp

DC motor: 24V

Recommended boat length (ft - m): 46' to 70' / 14m to 22m

Nozzle diameter (mm-inch): 250mm / 9.8"

Weight without tunnel: 38 kg

For DC system Volt: 24V

Main battery switch: BATSW600 - BPMAIN24

Main fuse: 355

CCE battery in EN value (min/max): 1268/2533

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
5635.5 €5,635.50 VAT included
€4,696.25 VAT excluded
VETUS VETUS
Quantity
Voir le produit

BOW THRUSTER 220 KGF - 24V - NOZZLE DIAMETER 300MM

RÉF. DM_VE_BOW22024D | VETUS

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 220kgf

Spark protection available: no

Power (kw-hp): 11kw / 15hp

DC motor: 24V

Recommended boat length (ft - m): 50' to 75' / 16m to 22m

Nozzle diameter (mm-inch): 300mm / 11.8"

Weight without tunnel: 68 kg

For DC system Volt: 24V

Main battery switch: BATSW600 - BPMAIN24

Main fuse: 500

CCE battery in EN value (min/max): 1267/2533

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
6882 €6,882.00 VAT included
€5,735.00 VAT excluded
VETUS VETUS
Quantity
Voir le produit

25 KGF 12 BOW THRUSTER VS 110 MM NOZZLE

RÉF. DM_VE_BOW2512E | VETUS

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 25Kkgf

Spark protection available: yes

Power (kw-hp): 1.5kw / 2hp

DC motor: 12V

Recommended boat length (ft - m): less than 24' / less than 7m

Nozzle diameter (mm-inch): 110mm / 4.33"

Weight without tunnel: 10 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 125

CCE battery in EN value (min/max): 333/667

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
1174.5 €1,174.50 VAT included
€978.75 VAT excluded
VETUS VETUS
Quantity
Voir le produit

BOW THRUSTER, 285 KGF 48 V, NOZZLE DIAMETER 300 MM

RÉF. DM_VE_BOW28548D | VETUS

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 285kgf

Spark protection available: no

Power (kw-hp): 17.5kw / 23.5hp

DC motor: 48V

Recommended boat length (ft - m): 60' to 100' / 20m to 30m

Nozzle diameter (mm-inch): 300mm / 11.8"

Weight without tunnel: 68 kg

For DC system Volt: 48V

Main battery switch: BATSW600 - BPMAIN24

Main fuse: 355

CCE battery in EN value (min/max): 933/1866

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
8602 €8,602.00 VAT included
€7,168.33 VAT excluded
VETUS VETUS
Quantity
Voir le produit

PROPULSEUR D'ÉTRAVE 35 KGF 12 VS TUYÈRE DE 150 MM

RÉF. DM_VE_BOW3512E | VETUS

Ces propulseurs d'étrave et de poupe VETUS DC originaux sont à la base d'une vaste gamme de propulseurs électriques DC tels que les Propulseurs CC standard, les propulseurs à autonomie prolongée, les propulseurs antidéflagrants et les propulseurs rétractables de VETUS. Développés et perfectionnés avec 40 ans de travail acharné, installé sur des bateaux du monde entier et fonctionnant dans toutes les conditions possibles.

Les avantages des propulseurs d'étrave VETUS sont infinis, mais ci-dessous nous soulignons les caractéristiques les plus importantes :

Nuisance sonore minimale en raison de la conception unique de l'hélice à six pales, engrenages coniques et accouplement flexible

Tableau de contrôle de haute qualité fabriqués en aluminium et interchangeables avec des panneaux plus anciens

Fluidité des écoulements grâce à une embase profilée

Interrupteur thermique intégré pour éviter la surchauffe

Élimine la corrosion et réduit le poids grâce aux hélices en matière synthétique

Haute performance, efficacité et moteur fiable à courant continu électrique à balais charbon

Installation facile et instructions claires

Utilisation simple et intuitive

Caractéristiques :

Poussée* : 35kgf

Protection anti-étincelage disponible : oui

Puissance (kw-hp) : 1.5kw / 2hp

Moteur D.C. : 12V

Longueur de bateau conseillée (ft - m) : 20' à 30' / 6m à 10m

Diamètre tuyère (mm-inch) : 150mm / 5.9"

Poids sans tunnel : 12Kg

Pour système DC Volt : 12V

Coupe batterie principal : BATSW250 - BPMAIN12

Fusible principal : 160

Batterie CCE en valeur EN (min/max) : 367/733

* Tous les propulseurs VETUS DC sont évalués à une tension de batterie de 10,5 ou 21 VDC. Cela prend en compte la chute de tension provoquée par le propulseur.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
1269.5 €1,269.50 VAT included
€1,057.92 VAT excluded
VETUS VETUS
Quantity
Voir le produit

35 KGF 12 BOW THRUSTER VS 125 MM NOZZLE

RÉF. DM_VE_BOW3512F | VETUS

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 35kgf

Spark protection available: yes

Power (kw-hp): 1.5kw / 2hp

DC motor: 12V

Recommended boat length (ft - m): 20' to 30' / 6m to 10m

Nozzle diameter (mm-inch): 125mm / 4.92"

Weight without tunnel: 12 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 160

CCE battery in EN value (min/max): 367/733

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
1269.5 €1,269.50 VAT included
€1,057.92 VAT excluded
VETUS VETUS
Quantity
Voir le produit

40 KGF 12 BOW THRUSTER VS 140 MM NOZZLE

RÉF. DM_VE_BOW4012 | VETUS

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 40kgf

Spark protection available: yes

Power (kw-hp): 1.5kw / 2hp

DC motor: 12V

Recommended boat length (ft - m): 26' to 34' / 8m to 10.50m

Nozzle diameter (mm-inch): 140mm / 5.5"

Weight without tunnel: 12 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 160

CCE battery in EN value (min/max): 367/733

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
1424 €1,424.00 VAT included
€1,186.67 VAT excluded
VETUS VETUS
Quantity
Voir le produit

45 KGF 12 BOW THRUSTER VS 125 MM NOZZLE

RÉF. DM_VE_BOW4512D | VETUS

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 45kgf

Spark protection available: yes

Power (kw-hp): 3kw / 4hp

DC motor: 12V

Recommended boat length (ft - m): 26' to 37' / 8m to 11.5m

Nozzle diameter (mm-inch): 125mm / 4.92"

Weight without tunnel: 16 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 250

CCE battery in EN value (min/max): 625/1250

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
1590 €1,590.00 VAT included
€1,325.00 VAT excluded
VETUS VETUS
Quantity
Voir le produit

BOW THRUSTER, 55 KGF 12 V, NOZZLE DIAMETER 150 MM

RÉF. DM_VE_BOW5512D | VETUS

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 55kgf

Spark protection available: yes

Power (kw-hp): 3kw / 4hp

DC motor: 12V

Recommended boat length (ft - m): 26' to 39' / 8m to 12m

Nozzle diameter (mm-inch): 150mm / 5.9"

Weight without tunnel: 17 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 250

CCE battery in EN value (min/max): 650/1250

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
2004.5 €2,004.50 VAT included
€1,670.42 VAT excluded
VETUS VETUS
Quantity
Voir le produit

BOW THRUSTER, 55 KGF 24 V, NOZZLE DIAMETER 150 MM

RÉF. DM_VE_BOW5524D | VETUS

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight thanks to synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 60kgf

Spark protection available: yes

Power (kw-hp): 3kw / 4hp

DC motor: 24V

Recommended boat length (ft - m): 26' to 39' / 8m to 12m

Nozzle diameter (mm-inch): 150mm / 5.9"

Weight without tunnel: 17 kg

For DC system Volt: 24V

Main battery switch: BATWS250 - BPMAIN24

Main fuse: 200

CCE battery in EN value (min/max): 342/683

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
2004.5 €2,004.50 VAT included
€1,670.42 VAT excluded
VETUS VETUS
Quantity
Voir le produit

BOW THRUSTER 60 KGF, 12 V, NOZZLE DIAMETER 185 MM

RÉF. DM_VE_BOW6012D | VETUS

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 65kgf

Spark protection available: no

Power (kw-hp): 3kw / 4hp

DC motor: 12V

Recommended boat length (ft - m): 27' to 40' / 8m to 12.50m

Nozzle diameter (mm-inch): 185mm / 7.3"

Weight without tunnel: 17 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 200

CCE battery in EN value (min/max): 500/1000

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
2135.5 €2,135.50 VAT included
€1,779.58 VAT excluded
VETUS VETUS
Quantity
Voir le produit

BOW THRUSTER 60 KGF, 24 V, NOZZLE DIAMETER 185 MM

RÉF. DM_VE_BOW6024D | VETUS

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 70kgf

Spark protection available: no

Power (kw-hp): 3kw / 4hp

DC motor: 24V

Recommended boat length (ft - m): 27' to 40' / 8m to 12.5m

Nozzle diameter (mm-inch): 185mm / 7.3"

Weight without tunnel: 17 kg

For DC system Volt: 24V

Main battery switch: BATSW250 - BPMAIN24

Main fuse: 100

CCE battery in EN value (min/max): 275/550

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
2135.5 €2,135.50 VAT included
€1,779.58 VAT excluded
VETUS VETUS
Quantity
Voir le produit

BOW THRUSTER 75 KGF, 12 V, NOZZLE DIAMETER 185 MM

RÉF. DM_VE_BOW7512D | VETUS

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 80kgf

Spark protection available: yes

Power (kw-hp): 4.4kw / 6hp

DC motor: 12V

Recommended boat length (ft - m): 30' to 45' / 10m to 14m

Nozzle diameter (mm-inch): 185mm / 7.3"

Weight without tunnel: 19 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 355

CCE battery in EN value (min/max): 917/1833

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
2551 €2,551.00 VAT included
€2,125.83 VAT excluded
VETUS VETUS
Quantity
Voir le produit
77173 item(s)
Vous ne trouvez pas votre pièce moteur bateau ?
(c’est bateau)
Loading...