KANZAKI YANMAR 177095-03190 REVERSE SHAFT

Take full control of your boat's propulsion with our marine gearboxes, designed for reliable shifting and efficient power transmission.
The reverse gear allows seamless switching between forward and reverse, ensuring precise, safe maneuvering in all conditions.
Our gearboxes provide a reliable connection between the engine and the propeller shaft, enhancing performance and protecting transmission components.
Built with corrosion-resistant materials, our gearboxes withstand harsh marine conditions and integrate with both inboard and hybrid propulsion systems.
Available for Volvo, Mercury, Mercruiser, OMC, PCM, and other marine propulsion systems.
Steel friction disc for ZF inverter with the following dimensions:
Outer diameter: 96.5mm
Tooth spacing: 1.77mm
Hurth Marine Application:
HSW630 hydraulic
HSW630 V-drive
HSW800
HSW800 V-drive
Bronze friction disc for ZF inverter with the following dimensions:
Outer diameter: 134mm
Thickness: 2 mm
36 teeth
Hurth Marine Application:
HSW630 hydraulic
HSW630 V-drive
HSW800
HSW800 V-drive
Reverse gear disc outer diameter 88mm inner 68mm mounting for Yanmar Kanzaki series reverse gear:
- KBW20
- KBW20-1
- KBW21
12 discs are required per inverter.
Yanmar reverse gear oil dipstick.
Tube length: 9.5cm.
Bronze friction disc for Yanmar reverse gear type KBW10.
Steel friction disc for Yanmar reverse gear type KBW10.
Yanmar KM3 - KM4 series reverse gear gauge.
Tube length: 14cm
Complete gasket kit for PCM 80A series inverter with a ratio of 1.23.
Oil pump oil seal for Velvet Drive 71 - 72C series inverter.
Complete gasket kit for the following inverters:
- ZF63A hydraulic
- Hurth HSW630 hydraulic
- ZF63IV - V-DRIVE
Kit suitable for all types of ZF63 inverter.
Solenoid valve for reversing on all PCM 80 series inverters.
Support washer for the following ZF - HURTH types of inverter:
HBW20
HBW220
HBW250
Inner diameter: 32mm
Outer diameter: 64.4mm
Complete seal kit for Borg Warner brand inverter - Velvet Drive series 71 or 72.
Rear oil seal for Velvet Drive inverter series 71 - 72.
Selector seal for ZF series inverter:
- HSW450
- HSW630
- HSW800
Front face outlet oil seal for PCM brand V-Drive Power Plus in 1.48/1 ratio.
Neutral safety probe for Velvet Drive - Borg Warner brand inverter from 1981 and later as well as PCM inverters.
Complete seal kit for Hurth ZF inverter types HBW10 and HBW150.
IRM80-type PCM reversor with a ratio of 1.23/1 and an electrical inversion control.
Fixing bolt for inverter.
Nut for Velvet drive 71 and 72C inverter output.
Stud for velvet inverter.