COUSSINETS DE PALIER VOLVO - 876515
Coussinets de paliers en cote standard vendus à l'unité.

The crankshaft converts the pistons' up-and-down motion into rotational energy. It is the core of the engine, driving the propeller and ensuring smooth power delivery.
Common causes for replacement include bearing failure, overloading, or engine seizure. Symptoms include knocking noises or unusual engine vibration.
At DAM Marine, we offer new and compatible crankshafts for Volvo, Suzuki, Mercury, Mercruiser, OMC, PCM and other popular marine engines.
Coussinets de paliers en cote standard vendus à l'unité.
Joint spi de arrière de vilebrequin pour moteurs Mercruiser diesel suivants :
CMD 2.8 EI 170
CMD 2.8 EI 200
CMD 2.8 ES 100
CMD 2.8 ES 170
CMD 2.8 ES 200
CMD 4.2 EI 250
CMD 4.2 EI 270
CMD 4.2 EI 300
CMD 4.2 EI 300 VM 254 I/L6
CMD 4.2 EI 320
CMD 4.2 ES 150
CMD 4.2 ES 250
CMD 4.2 ES 270
CMD 4.2 ES 300
CMD 4.2 ES 300 VM 254 I/L6
CMD 4.2 ES 320
CMD 4.2 MI 200
CMD 4.2 MI 230
CMD 4.2 MS 200
CMD 4.2 MS 230
CMD QSD 2.8 EI 170
CMD QSD 2.8 EI 210
CMD QSD 2.8 EI 220
CMD QSD 2.8 EI 230
CMD QSD 2.8 ES 170
CMD QSD 2.8 ES 210
CMD QSD 2.8 ES 220
CMD QSD 2.8 ES 230
CMD QSD 4.2 EI 270
CMD QSD 4.2 EI 320
CMD QSD 4.2 EI 350
CMD QSD 4.2 ES 270
CMD QSD 4.2 ES 320
CMD QSD 4.2 ES 350
D4.2L/220 IDI VM 254 I/L6
D4.2L/300 D-TRONIC VM 254 I/L6
CMD 2.8 EI 165
CMD 2.8 ES 165
D2.8L/165 D-TRONIC VM 169 I/L4
D4.2L/200 LD VM 254 I/L6
D4.2L/250 D-TRONIC VM 254 I/L6
Complete set of standard 62.19 mm main bearing shells for GM 4.3L and 3.8L V6 engines.
Complete main bearing set for GM 4 cylinder engine in standard size.
Complete set of bearing shells in 0.25mm repair dimension for GM V6 4.3L and 3.8L engines.
Joint spi arrière de vilebrequin incluant le nécessaire de montage pour moteur multiples base GM 4 cylindres, V6 et V8.
Pour le montage disposant d'une légère collerette sur le joint vous reportez à la référence 5512.
Bearing pads in dimension 0.75mm, width 39mm.
Coussinets de paliers pour moteur Mercruiser diesel base VM en cote standard.
Complete bearing kit for GM 6 and 5.3 liter V8 engines in standard size.
Technical note:
For 5.3 litre V8 assemblies it is necessary to check whether the rear bearing has a cheek on both bearings or on just one:
Top and bottom: 7298M
Bottom only: 2339M
Complete bearing kit for GM base V8 engine in 0.10 dimension.
Poulie de vilebrequin pour courroie serpentine de moteur 5.7 et 6.2 litres.
Poulie de vilebrequin pour moteur Crusader type 454.
Set of bearing shells for GM base V8 engine in dimension 0.20.
Complete bearing kit for GM base V8 engine in 0.30 dimension.
Complete bearing set for OMC 3.6L GM225 engine in 0.75mm repair dimension.
Coussinets de paliers pour moteur Volvo Penta séries D4 et D6 en cote standard.
Matériel existant en cote réparation 0.25 et 0.50 mm sur demande spécial.
Pignon de vilebrequin pour entrainement de la pompe à huile sur moteur PCM ZR.
New crankshaft for GM V8 6.2 liter engine with cast iron cylinder heads.
New vilebrequin for GM V8 5 liters and 5.7 liters standard.