HURTH HBW5-50-100 REVERSE DISC KIT
Complete repair kit for Hurth HBW 5 - 50 and 100 inverter including:
- 8 bronze discs .063
- 6 .056 steel discs
Complete repair kit for Hurth HBW 5 - 50 and 100 inverter including:
- 8 bronze discs .063
- 6 .056 steel discs
Complete reverse disc kit for Velvet inverter.
Kit including:
2 large bronze discs: R160008
1 large steel disc R160009
Complete repair kit including discs and seals for ZF45 inverter - HSW450A-2
Complete repair kit for Hurth ZF HBW10 and HBW150 inverter.
Kit including:
- All reassembly seals
- 8 bronze friction discs, 1.6 mm thick
- 8 steel friction discs, 1.42 mm thick
On the first generation there are inverters with 6 steel discs.
In this case, refer to reference ALT903.
Complete IRM80 inverter kit for PCM type FORD engine with a ratio of 1.23/1.
The IRM40 type inverters are now replaced by more robust IRM80 series inverters.
Kit including the following positions:
- Inverter
- Oil cooler
- Flexible
- Coupling
- Mounting kit
Complete overhaul kit for Velvet Drive 71 or 72 series inverter including the following items:
- Complete gasket kit
- 7 small bronze forward discs .060
- 6 small steel discs forward .068
- 2 large steel reverse discs R160009
- 3 large bronze reverse discs R160008
Retrofit cooling kit providing better cooling than the original Volvo coolers.
The presence of a larger number of bundles increases the cooling capacity.
Much more economical material than the original Volvo material.
Hardware including installation kit.
Oil cooler for Volvo Penta D4 and D6 engines as a replacement for MOTA brand coolers but at a significantly lower cost.
Cooler with the same thermal characteristics but with a simpler architecture.
IRM80 PCM reversor with a ratio of 1.1/1 and a mechanical inversion control.
Planned mounting for PCM type V-DRIVE.
Clutch cone for Yanmar KM2P reverse gear.
Diameter: 67.8mm
Height: 43mm
Complete inverter from Velvet Drive - Borg Warner type 71C with a ratio of 1/1.
GM small block application.
Complete replacement kit for ZF electric inverter 45 series with a ratio of 1:1 by a Velvet Drive brand inverter of the same characteristics and size.
Original INDMAR replacement.
Assembly for inverters with an electric selector for changing from forward to reverse gear.
Electric reverse gear.
Kit including:
- reassembly/screws kits.
- Jiffy type oil hose.
ZF type 450A - ZF45C inverter with a reduction ratio of 1:1 for Indmar - PCM - Marine Power engine.
Multiple applications.
The shift from forward to reverse is done mechanically.
Inverter to replace the ZF45C and ZF45CW (Walter) inverters with the necessary holes for installing the Walters adapter.
ZF brand inverter series 30 with straight output allowing the replacement of KBW inverters.
Ratio 2.70.
SAE4 flange for mounting on Yanmar turbo engines of types: 4JH4-TE - 4JH80 - 4JH110.
When replacing a Kanzaki brand Yanmar reverse gear with a ZF reverse gear it is necessary to also replace the coupling using part number 129673-81250.
Reversing support plate for PCM V-DRIVE inverter.
V-DRIVE Power Plus / PCM angle drive only in 1.48:1 ratio to be completed with the IRM80 series inverter to obtain a complete set.
Replacing older generations may require changing the media.
2 cans of R190251 oil are required.