1/2 NPT FEMALE PLUG
Cap diameter 1/2 NPT - 20.95mm with female head.
Cap diameter 1/2 NPT - 20.95mm with female head.
Gasoline filter holder for 1/4 diameter connection.
1" filter head type: FB02
For a 3/8 decanter you refer to SG6002.
Engine support for PCM engine including a 25mm diameter axis and 64mm length.
Relay 12 Volt 3 terminals isolated by the base.
Cap diameter 3/4 NPT - 26.44mm with female head.
Cap inner diameter 30mm.
Cap internal diameter 34mm.
Peel diameter 1" 1/2 - 38mm.
Base Ford 302 - 351.
Cap diameter 1/2 NPT - 20.95mm with male head hexagonal 6 pans.
Cooling connection at 90° dimension 3/4 X 3/4.
For durite diameter 19mm.
Filetage: 3/4
Durite: 19mm
Alternative 55 amps for mounting with V-belt (non-serpentine) with an internal regulator.
Alternator 12 Volt 55 Amp for Volvo Penta and WTO engine with a fine belt.
Alternative 12 Volt 70Amp for the WTO engine with an internal controller and a mass installation to replace the former Prestolite mountings with external regulator.
V-belt 9.5mm wide and 1013mm long.
Full set of Ford 5.8 litre engine bearing pads for repair 0.25 mm.
Full set of Ford 5.8 litre engine bearing pads for repair 0.50mm.
Full set of Ford 5.8 litre engine bearing pads in repair 0.75mm.
Full set of Ford 5.8 litre engine bearing pads in standard size.
Bloc moteur reconditionné pour base FORD 5.8 litres GT40
Caractéristiques :
- Culasses GT40 - 300HP
- Perçage pour pompe à essence mécanique
Le reconditionnement moteur intègre la rectification, l'usinage, le remplacement et le contrôle de l'ensemble des éléments clefs afin de vous fournir un bloc moteur marin apte à remplacer votre ancienne mécanique.
Moteur incluant des pièces internes de qualités supérieur afin de répondre aux exigences marines.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Low-pressure electric gasoline pump for engine installation injection and carburettor.
Right dimension cooling connection 3/4 X 1".
For diameter 25mm.
Filetage: 3/4
Durite: 25mm