

TURBINE REFROIDISSEMENT YAMAHA 300-350HPEMP
Ref. AP2295Turbine pour moteurs Yamaha 300 - 350HP 4 temps.
Retrouvez facilement votre pièce détachée de bateau
We have water pump turbines for all brands, such as Volvo Penta, Yanmar or Mercruiser.Some are present in water pump kits.To find the turbine compatible with your engine, use the filters available to the left of your screen by indicating the brand, number of cylinders and model of your boat engine.
The turbine is the main element of your brewing pump, which is in turn essential to the proper operation of the engine as it is used to keep the engine operating temperature.
The turbine will cause water in the cooling circuit, if worn or damaged, the water will not circulate properly, the engine will not cool properly.The main consequence of this phenomenon is engine overheating, which can result in engine avariation.
Turbine pour moteurs Yamaha 300 - 350HP 4 temps.
Yanmar engine turbine 6AYM series with the following dimensions:
Tree: 38mm
Diameter: 127.6mm
Height: 128mm
12 blades
Cooling turbine for Honda 25-30HP engines.
Cooling turbine for Honda 9.9 - 15HP engines.
Cooling turbine for Honda 8-15HP engines.
Johnson Engine Cooling Turbine - Evinrude 2 cylinders 25-40HP.
Turbine Yamaha
Kit Turbine for Yamaha Hors-bord engines from 1988-91
Cooling turbine for Yamaha engines:
F225
F250
F300
Turbine with 2 12 blades with the following dimensions:
External diameter: 95mm
Diameter axis : 25mm
Height: 88.50
Material: Neoprene
Honda engine turbine: B175A, BF175A, BF200A, BF225A, BF250A
Cooling turbine 6 blades dimensions: 50.8 x 22.1 x 12.17MM
Turbine for Johnson Sea Water Pump.
The turbine is the moving element of the water pump in your inboard or outboard engine.It creates, in turn, a depression between the pale who aspire to sea water and propels this water to the engine in order to cool it.
\nA defective turbine is responsible in 99% of cases, with the thermostat, motor heaters.
\nWhen your water pump turbine fails, the engine heats much faster than normal times.On an outboard engine, the pee leaves hot air or noisy water, and on the inboard, the water no longer springs from the exhaust.
\nIf you have an outboard engine, before you change the turbine, check if the rotor is not plugged.
\nThe turbine generally changes every year, especially if the engine has only turned very little because the turbine is hardened, depressing.