

INVERTER OIL DIPSTICK VOLVO - 3582067VOLVO PENTA
Ref. 3582067Targeted pull rod for ZF reverser of types:
HS45
HS63
HS68
Retrouvez facilement votre pièce détachée de bateau
In order to find more easily the oil gauge compatible with your engine, do not hesitate to use the filters available to you by indicating the brand and model of your boat's engine.You can display all the gauges available for your engine on DAM Marine.
If you have any questions, don't hesitate contact us.
Targeted pull rod for ZF reverser of types:
HS45
HS63
HS68
Oil dipstick for GM base V6 engine.
Material to be used with reference 551661.
Cap for securing the hole in the engine block instead of the oil gauge on the V8 5.7 and 6.2L MPI engine.
Diameter 9.621mm .
Cap allowing to close the hole in the engine block instead of the oil gauge on the V6 engine.
Diameter 9.367mm .
Wheel gauge for PCM 5.7 liters.
Oil gauge for PCM 5.7 liters in V-DRIVE inverse output.
Oil gauge for PCM 5.7 liters in direct inverse output ( 12 degrees ).
Oil gauge tube to map oil with a peel on the side of the crankcase.
All parts for the constitution of an oil gauge kit are:
- 98287: transmitter
- R041072 : gauge tube
- BRA400-3838: oil connection
3/8 gauge tube thread.
Complete universal oil gauge kit for mounting through the GM V8 Vortec engine block.
Gauge tube for 6-litre PCM engine catalysed.
Wheel gauge for PCM 6-litre engine not catalysed.
Gauge tube for PCM 6 liters non catalysed.
Oil gauge tube for PCM engine in direct inverse output.
Oil gauge for PCM 5.7 liters in direct inverse output ( 0 - 4 degrees).
The oil gauge allows you to measure the current oil level in your engine.
\nHowever, this check is more effective when the engine has been cut for one or two minutes.
\n\n