PISTON GM350 V8 - MINCE - STD
Piston en cote standard 101.60mm disposant de segments minces de types 1.5x1.5x3mm.
The piston converts combustion pressure into mechanical motion by moving within the cylinder liner. It is vital for compression, engine power, and fuel efficiency.
Low compression, oil burning, power loss, or damaged piston crowns signal replacement. Pistons are typically changed during engine rebuilds or after mechanical failure.
DAM Marine offers high-performance pistons compatible with Volvo, Mercruiser, OMC, PCM engines. Made from heat-resistant alloys, engineered for durability and corrosion resistance.
Piston en cote standard 101.60mm disposant de segments minces de types 1.5x1.5x3mm.
Piston pour moteur GM V8 d'alésage 102.6mm cote 0.40.
Piston in repair dimension 0.30 102.35mm with thin segments of type 2X2X4.8mm.
For this equipment, please contact us directly and bring your old pistons with you.
Piston en cote réparation 0.30 102.35mm disposant de segments minces de types 1.5x1.5x3mm.
Piston without rings for GM454 7.4 litre generation V and VI engine in repair dimension 0.30.
Segments with the following dimensions: 1.98 x 1.98 x 4.76MM.
Scraper segment depth: 3.20mm
Piston en cote réparation 0.20 102.10mm disposant de segments minces de types 1.5x1.5x3mm.
Piston in dimension 0.30 for GM 5 liter vortec engine with thin rings.
Piston pour moteur GM V6 d'alésage 102.35mm cote 0.30.
Piston sans segments pour moteur de type GM454 7.4 litres génération IV en cote réparation 0.40.
Piston sans segments pour moteur de type GM454 7.4 litres génération IV en cote réparation 0.30.
Piston pour moteur GM V8 d'alésage 103.1mm cote 0.60.
Piston with pin supplied without segmentation for GM base engine in repair dimension 0.50mm.
Piston without rings for GM454 7.4 litre generation V and VI engines in standard size.
Segments with the following dimensions: 1.98 x 1.98 x 4.76MM.
Scraper segment depth: 3.20mm
Piston pour moteur 4 cylindres 3 litres après 1990 disposant du dessus plat.
Piston en cote standard 101.60mm.
Piston sans segments pour moteur de type GM454 7.4 litres génération IV en cote standard 108mm.
Piston en cote réparation 0.40 102.60mm disposant de segments minces de types 1.5x1.5x3mm.
Piston en cote réparation 0.20 102.10mm disposant de segments minces de types 1.5x1.5x3mm.
Piston for GM V8 engine with 95.75mm bore, 0.30 dimension before 1988, Crusader Chriscraft types...
Piston en cote réparation 0.60 103.1mm disposant de segments minces de types 1.5x1.5x3mm.
Piston without rings for GM454 7.4 litre generation V and VI engine in repair dimension 0.20.
Segments with the following dimensions: 1.98 x 1.98 x 4.76MM.
Scraper segment depth: 3.20mm
Piston for 4-cylinder 3-litre engine after 1990 with flat top.
Piston in repair dimension 0.40.
Piston en cote standard 101.60mm disposant de segments minces de types 1.5x1.5x3mm.
Piston for GM V8 engine with 95.75mm bore, 0.30 dimension.