VOLVO V6-V8 20CM EXHAUST ELBOW
Exhaust elbow for Volvo Penta and OMC engines not raised to a height of 20cm for the whole.
Assembly including screws and seal.
The exhaust elbow connects the manifold to the exhaust outlet or riser. It mixes hot exhaust gases with cooling water to prevent overheating and allow safe discharge overboard.
Cracks, corrosion, or internal blockage can cause water intrusion into the engine. Replacement is recommended every 5–7 years or at signs of damage or wear.
DAM Marine offers cast iron or aluminum elbows compatible with Volvo, Mercruiser, OMC, PCM… Engineered to resist salt, heat, and vibration.
Exhaust elbow for Volvo Penta and OMC engines not raised to a height of 20cm for the whole.
Assembly including screws and seal.
Cast iron exhaust elbow for Yanmar 1 - 2 and 3 cylinder engines.
Mountings provided on reverse pitch connection fitting type 104214-13580 not included.
Water tap connection not included under reference 104407-44480 in diameter 17.5mm.
Material also available in stainless steel under the reference YMGM321.
The outlet is designed for a 55mm diameter hose but also has a thread to adapt the outlet according to your installation.
Exhaust elbow for Volvo Penta diesel engine with a 38mm diameter water inlet on the top and a 100mm diameter exhaust outlet.
Mounting for Volvo Penta engines of types:
D31A
AQAD31A
TAMD31A
TMD31A
AD41A
AQAD41A
D41A
TAMD41A
TMD41A
Elbow with a single side tapping.
For an exhaust elbow with 2 side water connections, refer to reference 16963.
Coude d'échappement pour moteur Mercruiser V6 ou V8 ancien montage.
Nécessaire de montage inclus.
Exhaust elbow for Volvo Penta diesel engines series 31 and 41 with 2 water taps.
Exhaust hose with a diameter of Ø90mm
Mountings for Volvo Penta engines of types:
AD31B
TAMD31B
TAMD31D
TAMD31L-A
TAMD31M-A
TAMD31P-A
TMD31B
TMD31D
TMD31L-A
AD41B
AD41D
D41B
TAMD41B
TAMD41D
TAMD41H-A
TAMD41L-A
TAMD41M-A
TAMD41P-A
TMD41B
TMD41D
TMD41L-A
Elbow with 2 side water taps.
For an exhaust elbow with a single side water connection, refer to reference 162898.
Coude d'échappement 21cm origine Mercruiser - OEM disposant du nouveau montage avec les passages d'eau extérieur Dry.
Nécessaire de montage non inclus.
Exhaust elbow height 28.7 cm for Volvo Penta V6 and V8 raised engines does not include the mounting kit, namely:
1 pcs: FP17541 gasket kit
4 pcs: 800063
Exhaust elbow for old generation Volvo Penta V8 engine, AQ271, AQ225 ...
Genuine Volvo Penta OEM exhaust elbow for older generation V6 engines of types:
- 430A
- 431A
- 432A
- AQ175A
- AQ205A
Mounting kit not included.
Remember to add:
- Complete reassembly kit 22146
- A 90050 cap
Stainless steel exhaust elbow for Volvo Penta 2000 and D1 series engines with a 19mm diameter water connection:
MD2010
MD2020
MD2030
MD2040
D1-13A - D1-13B - D1-13F
D1-20A - D1-20B - D1-20F
D1-30A - D1-30B - D1-30F
D2-40A - D2-40B - D1-40F
Center distance: 50 x 50mm.
Elbow gasket 861907 included.
Exhaust hose diameter 45mm.
PCM brand long mount exhaust elbow for Ford engine base.
Remember to order:
- Elbow joint: RM002
- Screws: 4 pcs 800026
Exhaust elbow with 75mm diameter.
17 cm exhaust elbow for Mercruiser engine with new assembly with Dry external water passages.
Mounting hardware included.
The elbow gasket included by default is 27-864850A02.
Elbow height to be confirmed on your engine - available in 21cm height under reference MC20864591.
Exhaust elbow height 25.7CM in original Volvo Penta OEM for V8 engine not including the mounting kit namely:
1 pcs: FP17541 gasket kit
4 pcs: 800063
PCM brand short mount exhaust elbow for GM 5.0-5.7 and FORD 5.8l engine base.
elbow outlet diameter 90 mm
Remember to order:
- Elbow joint: RM002
- Screws: 2 pcs RS0387 + 2 pcs 800027
Exhaust elbow for Volvo Penta diesel engine series 30 and 40.
Stainless steel exhaust elbow for Volvo Penta 2000 series engine.
Elbow gasket 16902 included.