MERCRUISER MANIFOLD FRONT PLATE
Mercruiser 120hp 2.5L manifold front plate before 1982 with an intake plate under the carburetor.
Mercruiser 120hp 2.5L manifold front plate before 1982 with an intake plate under the carburetor.
Exhaust elbow for Crusader engine with 75mm diameter outlet.
Exhaust elbow for Mercruiser 3.7 liter 4 cylinder type 470 engine.
Exhaust elbow outlet for Chrysler engine.
Solid plate without water tap for Chrysler manifold.
Stainless steel elbow for Yanmar 4LH-DTE and 4LH-STE engines.
Reassembly gasket 119171-13510 included.
Stainless steel exhaust elbow for the following Northern Lights generator sets:
M16C
M20CL / M20CR / M20CR2 / M20CRW2
M753W2 / NL753W2 / M753G / M773LW2 / M773LW3 / NL773LW3
M843NW2 / M843NW3 / NL843NW2 / NL843NW3
L844D / M844K / M844LK / M844K2 / M844LK2 / M844LW2 / M844W2 / NL844K / NL844LK / NL844K2 / NL844LK2 / NL844LW2 / NL844W2
Stainless steel exhaust elbow for Volvo Penta D12 series engines - TAMD164 - TAMD165.
Kit including:
- 2X 863442 fixing flange
- Elbow joint 863353
- Water connection 813644
- Cap 2x 914392
- Cap 981749
Stainless steel exhaust elbow for the following Onan generator sets:
MDKDL
MDKDM
MDKDN
7MDKAL
MDKBN
MDKBL
MDKBM
Stainless steel exhaust elbow for PERKINS 4108 engine with water tapping on the rear part of the elbow (near the joint surface) allowing the water pipe to be positioned to the side for engines not having the Bowman assembly.
TUE50 hose for exhaust outlet.
Mounting hardware included:
- elbow joint
- water pipe gasket
- water pipe and screws
90° stainless steel exhaust elbow riser for Volvo Penta engine:
- D5A-B, D5A-T, D5A-TA
- D7A-B TA, D7A-T, D7A-TA, D7C-B TA, D7C-TA
- TAMD63L-A, TAMD63P-A
- TAMD71B
- TAMD72
- TAMD73P-A, TAMD73WJ-A
- TAMD74A, TAMD74A-A, TAMD74A-B, TAMD74C-A, TAMD74C-B, TAMD74L-A, TAMD74L-B, TAMD74P-A, TAMD74P-B
- TAMD75P-A
Remember to add thermal protection with reference MAT7.
Coude d'échappement inox pour moteurs Detroit Diesel de types :
6V71
6V92
8.2T
8.2TI
8V71
Replacement kit for Volvo Penta TAMD60 - TAMD70 series exhaust elbow.
Complete kit including the following positions:
- Stainless steel exhaust elbow
- Stainless steel exhaust elbow mounting flange
- Exhaust elbow gasket
- Hose clamp
The original water connection must be replaced for the installation of this kit.
This kit allows the replacement of the Volvo OEM assembly with a quality product with increased longevity.
Volvo Diesel App:
AQD70B
AQD70BL
AQD70C
AQD70CL
MD70C
TAMD60A
TAMD60B
TAMD60C
TAMD61A
TAMD70B
TAMD70C
TAMD70D
TAMD70E
TAMD71A
TAMD71B
THAMD70B
TMD70B
TMD70C
Kit coude d'échappement en inox pour moteurs Cummins de types :
- 6BTA 5.9
- QSB 5.9
Kit incluant l'ensemble des pièces pour le remplacement à savoir :
- Pre-coude
- Coude
- Colliers
- Joints
- Visserie
- Bride de serrage
- Pipe d'eau