OMC EXHAUST ELBOW
Exhaust elbow for OMC 4 and 6 cylinder in-line engines up to 1993.
Exhaust elbow for OMC 4 and 6 cylinder in-line engines up to 1993.
Exhaust elbow for Crusader engine based on GM SB and BB with the elbow in the middle of the manifold.
Height 160mm unraised.
For raised mounting, please refer to reference R029015.
Aluminum exhaust elbow for Marine Power brand engine.
Elbow joint to be added in reference 283147 and restriction 283111.
Fits 4.3L V6 to 8.2L V8 inclusive.
Stainless steel exhaust elbow riser for Yanmar 6LY series engine.
Heat insulation protection reference MAT3 not included.
Stainless steel exhaust elbow for Yanmar engine with water connection on the side.
Application :
- 4JH4-HTE1
- 4JH4-HTE
- 4JH3-HTE
- 4JH3-DTE
Reassembly gasket 129472-13520 included.
Stainless steel exhaust elbow kit for Volvo Penta D6 series engines.
The following hardware is included in the elbow kit:
- Water pipe VP21450768 and screws
- Plate VP3584006 and screws
- 2 O-rings 969415 for water pipe and plate
- VP25767 hose clamp
Elbow not having a collar at the exhaust outlet unlike reference VP8844.
Stainless steel water connection kit for Perkins 4.108 engine including screws and gasket.
Fitting included with exhaust elbows.
Raised exhaust elbow for Crusader engine based on GM SB or BB with the elbow in the middle of the manifold and a total height of 21cm.
For the 16cm assembly, refer to reference 98126.
Exhaust elbow for Crusader 6 litre engine with 2 water passages on the front.
Assembly with two plugs for water passage in reverse of reference R029016.
Round exhaust elbow for OMC 4 cylinder 2.5L OR 3L engine.
Stainless steel elbow for Yanmar QM series engines which screws onto the plate at the end of the exhaust manifold.
Stainless steel riser for Yanmar 6LP series exhaust elbow.
Stainless steel exhaust elbow for Yanmar BY series engine:
4BY150-YMI
4BY180-YMI
4BY150Z-YMI
4BY180Z-YMI
4BY150
4BY150Z
4BY180
4BY180Z
6BY220-YMI
6BY220Z-YMI
6BY260-YMI
6BY260Z-YMI
6BY220
6BY220Z
6BY260
6BY260Z
4BY2-150
4BY2-150Z
4BY2-180
4BY2-180Z
6BY2-220
6BY2-220Z
6BY2-260
6BY2-260Z
6BY3-220
6BY3-220Z
6BY3-260
6BY3-260Z
4BY3-150
4BY3-150Z
4BY3-180
4BY3-180Z
Elbow not having a thread for installing a probe.
90° exhaust elbow for Crusader engine with 100mm outlet.
Coude échappement remplace Volkswagen PN 065253171 (A)
Convient aux moteurs suivants : TDI 100, 120, 140, 150, 165
Acier inoxydable 316 usiné CNC de précision
Remplace l'aluminium d'origine par de l'acier inoxydable de haute qualité.
Exhaust elbow for Perkins perama 100 engine of types:
M20
M25
M30
M35
Elbow joint included.
Exhaust hose diameter 51mm.
Water hose diameter 22mm
Center distance of fixing screws 50mm