

Retrouvez facilement votre pièce détachée de bateau
Here you will find the different types of exhaust seal for your Volvo Penta, Mercury - Mercruiser, PCM (Pleasure Craft Marine), Yanmar, Illmor, Idmar...
In order to choose the joints adapted to your engine, you can use the filters on the left of your screen to select the brand and model of your engine.
You can display only the joints compatible with your engine.
Joint in kit joints FP17501.
Restriction for water passage on marine exhaust elbow power in diameter 25mm.
Exhaust elbow joint for PCM and Crusader 6 litres base engine.
Exhaust elbow joint for PCM engine.
Exhaust elbow joint at the end of the collector on the WTO V6 engine type GM229 of 3.8 litres.
Kit joints pour moteur Mercruiser incluant :
4 pcs joints de trappe de visite AP0314
4 pcs joints de coude 27-48042
Kit of 2 closed elbow joints for Mercruiser motor with a temperature exchanger.
For the rigid stainless steel plate you refer to the reference MC2087918.
Exhaust elbow kit for Mercruiser V6 - V8 engine.
The function of the exhaust elbow joint is to prevent any leakage of gas or exhaust water from the junction between your exhaust manifold (loaded to collect the gas and sea water that evacuates) and your exhaust elbow.
\nAt each dismantling of your exhaust elbows, it is recommended to inspect your elbows and collectors before the season to ensure the good condition of these elbows.An exhaust elbow joint can also be degraded by heat, vibration or corrosion.It no longer ensures motor/collector sealing and must be replaced.