Anti-fouling

Antifouling Trilux 33 black 5 liters:

High performance

Suitable for aluminum

Vivid shades

30/35 knots

Tesa® 62204 masking tape consists of a stable PVC backing coated with a natural rubber adhesive mass.

This natural rubber adhesive mass offers excellent adhesive properties on a large number of different surfaces.

Intended for short-term masking operations, it provides precise delimitation of paint areas.

Width: 24mm

Length: 66M

ANTIFOULING ULTRA 300 WHITE-GREY - 2.5L

High performance antifouling

Resistant for regatta sailboats and motor boats

Can be sanded

Ultra 300 is an effective antifouling against marine organisms, greasy film, vegetable and animal dirt. It is a Premium antifouling intended for yachtsmen and professionals. Effective in both freshwater and saltwater. The hard, sandable finish provides anti-fouling performance for up to 12 months. It can be sanded down to provide a smoother finish allowing optimal glide in the water. Ideal for fast boats.

Colour: White-Grey.

Capacity: 2.5 litres.

Application: Brush, Roller, Airless.

Dilution: Not recommended

Drying at 15°: 45 min, minimum overcoating: 10 hours

Launching at 15°: 12 hours

Theoretical PC: 10 m²/L

Practical PC: 9 m²/L

Note: Not suitable for aluminium.

Antifouling suitable for the protection of metal parts subject to permanent immersion, does not deteriorate to mechanical and galvanic wear or electrolysis to which metals are subjected.

Don't take off, don't leave in plaque and no concretion is formed.Applies on bronze, inox, aluminum and also on the original paints of the base.

Apply before applying a layer of Metal Primer.

Color : Grise.

Application : Brosse - Pistolet.

Dilution: Diluants No. 4.

Dry at 20°C: at touch: 1 hour, overcouchable by itself: 2 hours, immersion min 16h, max 6 months.

Couches 2 - 3.

Power covering: 10m2/L.

VC Tar2 is a bi-component epoxydic primary providing protection against osmosis on Polyester ships coated with gelcoat and anticorrosive protection on steel and light alloy.Useable only below the flotation.

- Self-velling to give an excellent finish.

- Easy application - over-ouchable quickly.

- No sanding between the layers.

- Provides excellent sealing, usable in preventive or curative osmosis treatment.Ideal primary anti-fouling in the VC range.

Type: Bi-component.

Mixture: 7:1 in volume.

Colour: Black - White.

Capacity: 2.5 litres.

Application : Brush - Roll.

Dilution: VC General Thinner.

Drying at 20°C: Over-couching 2h mini- 3 days max.

Theoretical p.C.: 11.30 m2 / Liter.

P.C. practical: 9 m2 with brush.

Note: Useable only below the flotation.

VC Tar2 is a bi-component epoxydic primary providing protection against osmosis on Polyester ships coated with gelcoat and anticorrosive protection on steel and light alloy.Useable only below the flotation.

- Self-velling to give an excellent finish.

- Easy application - over-ouchable quickly.

- No sanding between the layers.

- Provides excellent sealing, usable in preventive or curative osmosis treatment.Ideal primary anti-fouling in the VC range.

Type: Bi-component.

Mixture: 7:1 in volume.

Colour: Black - White.

Capacity: 1 liter.

Application : Brush - Roll.

Dilution: VC General Thinner.

Drying at 20°C: Over-couching 2h mini- 3 days max.

Theoretical p.C.: 11.30 m2 / Liter.

P.C. practical: 9 m2 with brush.

Note: Useable only below the flotation.

Colour Black 2 Litres.

Improved glide: speed - racing.

Very smooth finish, thin film technology.

VC Offshore EU is a high performance antifouling, suitable for heavily soiled areas, for both power and sailing boats.

Fast drying product providing a hard, smooth film that is easily cleaned and sanded.

Smooth finish for improved speed and efficiency

Hard, sandable film - Ideal for powerboats and racing boats

Quick and easy application. No sanding between coats

Fast drying for quick overcoating and flexible time to water

Colour White - grey 2 Litres.

Improved glide: speed - racing.

Very smooth finish, thin film technology.

VC Offshore EU is a high performance antifouling, suitable for heavily soiled areas, for both power and sailing boats.

Fast drying product providing a hard, smooth film that is easily cleaned and sanded.

Smooth finish for improved speed and efficiency

Hard, sandable film - Ideal for powerboats and racing boats

Quick and easy application. No sanding between coats

Fast drying for quick overcoating and flexible time to water

ANTIFOULING ULTRA 300 NAVY BLUE - 2.5L

High performance antifouling

Resistant for racing yachts and motorboats

Can be sanded

Ultra 300 is an effective antifouling against marine organisms, greasy sails, plant and animal dirt. It is a premium antifouling for yachtsmen and professionals. Effective in both fresh and salt water. The hard, sandable finish provides antifouling performance for up to 12 months. It can be sanded to provide a smoother finish for optimum glide in the water. Ideal for fast boats.

Colour: Navy Blue.

Application: Brush, Roller, Airless.

Thinning: Not recommended

Drying time at 15°: 45 min, minimum overcoating time: 10 hours

Setting at 15°: 12 hours

Theoretical coverage: 10 m²/L

Practical coverage: 9 m²/L

Note: Not suitable for aluminium.

ANTIFOULING ULTRA 300 NAVY BLUE - 0.75L

High performance antifouling

Resistant for racing yachts and motorboats

Can be sanded

Ultra 300 is an effective antifouling against marine organisms, greasy sails, plant and animal dirt. It is a premium antifouling for yachtsmen and professionals. Effective in both fresh and salt water. The hard, sandable finish provides up to 12 months of anti-fouling performance. It can be sanded to provide a smoother finish for optimum glide in the water. Ideal for fast boats.

Colour: Navy Blue.

Application: Brush, Roller, Airless.

Thinning: Not recommended

Drying time at 15°: 45 min, minimum overcoating time: 10 hours

Setting at 15°: 12 hours

Theoretical coverage: 10 m²/L

Practical coverage: 9 m²/L

Note: Not suitable for aluminium.

Primary for metals (inox, bronze, aluminium) with strong grip power, suitable for VELOX PLUS.

Colour: Green.

Application : Brosse - Pistolet.

Dilution: Diluants No. 4.

Dry at 20°C: at touch: 1 hour overcouchable by 2 hours.

immersion min 16h, max 6 months.

Covering power: 12m2/L.

ANTIFOULING CRUISER 250 ROUGE - 0.75L

The Cruiser 250 is an effective anti-fouling against marine organisms, sail fat, plant and animal dirt.It is a professional eroding anti-fouling applicable to vessels operating in fresh water and salt water.Specially designed to offer up to one year of protection for sailboats as for motor boats (up to 25 knots of regular speed).

Colour: Red.

Capacity: 750 ml.

Application : Brush, Roll, Airless.

Dilution: Not recommended

Drying at 15° : 45 min, mini overcouching : 10 hours

Water at 15° : 6 hours

P.C. Theoric: 10 m2/L

P.C. Practice: 9 m2/L

Note:Not suitable for aluminum.

Antifouling suitable for the protection of metal parts subject to permanent immersion, does not deteriorate to mechanical and galvanic wear or electrolysis to which metals are subjected.

Don't take off, don't leave in plaque and no concretion is formed.Applies on bronze, inox, aluminum and also on the original paints of the base.

Apply before applying a layer of Metal Primer.

Colour: Black.

Application : Brosse - Pistolet.

Dilution: Diluants No. 4.

Dry at 20°C: at touch: 1 hour, overcouchable by itself: 2 hours, immersion min 16h, max 6 months.

Couches 2 - 3.

Power covering: 10m2/L.

ANTIFOULING ULTRA 300 WHITE GREY - 0.75L

High performance antifouling

Resistant for racing yachts and motorboats

Can be sanded

Ultra 300 is an effective antifouling against marine organisms, greasy sails, plant and animal dirt. It is a premium antifouling for yachtsmen and professionals. Effective in both fresh and salt water. The hard, sandable finish provides antifouling performance for up to 12 months. It can be sanded to provide a smoother finish for optimum glide in the water. Ideal for fast boats.

Colour: White grey.

Capacity: 750 ml.

Application: Brush, Roller, Airless.

Dilution: Not recommended

Drying at 15°: 45 min, minimum overcoating: 10 hours

Setting in water at 15°: 12 hours

Theoretical coverage: 10 m²/L

Practical coverage: 9 m²/L

Note: Not suitable for aluminium.

ANTIFOULING ULTRA 300 DARK GREY - 2.5L

High performance antifouling

Resistant for racing yachts and motorboats

Can be sanded

Ultra 300 is an effective antifouling against marine organisms, greasy sails, plant and animal dirt. It is a premium antifouling for yachtsmen and professionals. Effective in both fresh and salt water. The hard, sandable finish provides antifouling performance for up to 12 months. It can be sanded to provide a smoother finish for optimum glide in the water. Ideal for fast boats.

Colour: Dark grey.

Capacity: 2.5 litres.

Application: Brush, Roller, Airless.

Dilution: Not recommended

Drying at 15°: 45 min, minimum overcoating: 10 hours

Setting in water at 15°: 12 hours

Theoretical coverage: 10 m²/L

Practical coverage: 9 m²/L

Note: Not suitable for aluminium.

ANTIFOULING CRUISER 200 WHITE - 2.5L

True white colour.

Cruiser 200 is an erodible antifouling effective against marine organisms, greasy sails, plant and animal fouling. It is a professional erodible antifouling for use on vessels operating in fresh and salt water. Specially formulated to provide up to one year's protection for both sailing and power boats (up to 25 knots regular speed). It offers true white and is suitable for all substrates including aluminium.

Colour: Pure white.

Capacity: 2.5 litres.

Application: Brush, Roller, Airless.

Dilution: Not recommended

Drying time at 15°: 45 min, minimum overcoating time: 10 hours

Setting in water at 15°: 12 hours

Theoretical coverage: 10 m²/L

Practical coverage: 9 m²/L

Note: Suitable for aluminium.

ANTIFOULING UNIPRO 250 NOIR 5L

Unipro 250 is an effective anti-fouling against marine organisms, fatty veil, plant and animal dirt.It is a professional eroding anti-fouling applicable to vessels operating in fresh water and salt water.Specially designed to offer up to one year of protection for sailboats as for motor boats (up to 25 knots of regular speed).

Colour: Black.

Capacity: 5 litres.

Application : Brush, Roll, Airless.

Dilution: Not recommended

Drying at 15° : 45 min, mini overcouching : 10 hours

Water at 15° : 6 hours

P.C. Theoric: 10 m2/L

P.C. Practice: 9 m2/L

Note:Not suitable for aluminum.

ANTIFOULING CRUISER 250 ROUGE - 2.5L

The Cruiser 250 is an effective anti-fouling against marine organisms, sail fat, plant and animal dirt.It is a professional eroding anti-fouling applicable to vessels operating in fresh water and salt water.Specially designed to offer up to one year of protection for sailboats as for motor boats (up to 25 knots of regular speed).

Colour: Red.

Capacity: 2.5 litres.

Application : Brush, Roll, Airless.

Dilution: Not recommended

Drying at 15° : 45 min, mini overcouching : 10 hours

Water at 15° : 6 hours

P.C. Theoric: 10 m2/L

P.C. Practice: 9 m2/L

Note:Not suitable for aluminum.