Antifouling paint for boats and marine hull protection

Antifouling suitable for the protection of metal parts subject to permanent immersion, does not deteriorate due to mechanical and galvanic wear or electrolysis to which metals are subjected.

Does not peel off, does not plaque and no concretion forms. Can be applied to bronze, stainless steel, aluminum and also to the original paintwork of the bases.

First apply a coat of Metal Primer.

Color: Gray.

Application: Brush - Gun.

Dilution: Diluents No. 4.

Drying at 20°C: to the touch: 1 hour, self-recoatable: 2 hours, immersion min 16h, max 6 months.

Layers 2 - 3.

Coverage: 10m²/L.

Antifouling suitable for the protection of metal parts subject to permanent immersion, does not deteriorate due to mechanical and galvanic wear or electrolysis to which metals are subjected.

Does not peel off, does not plaque and no concretion forms. Can be applied to bronze, stainless steel, aluminum and also to the original paintwork of the bases.

First apply a coat of Metal Primer.

Color: Black.

Application: Brush - Gun.

Dilution: Diluents No. 4.

Drying at 20°C: to the touch: 1 hour, self-recoatable: 2 hours, immersion min 16h, max 6 months.

Layers 2 - 3.

Coverage: 10m²/L.

Boatguard 100 is an antifouling product that is effective against marine organisms, oil film, and plant and animal fouling. It is a professional semi-erodible antifouling product suitable for use on vessels operating in fresh and salt water. Designed to provide up to a year of protection, it can be applied up to 6 months before immersion.

Color: Navy blue

Packaging: 5 liter can

Application: Brush, Roller, Airless

Dilution: Not recommended

Drying at 15°: 45 min, minimum overcoating time: 10 hours

Launch at 15°: 6 hours

Theoretical PC: 10 m²/L

Practical PC: 9 m²/L

Note: Not suitable for aluminum.

Antifouling suitable for the protection of metal parts subject to permanent immersion, does not deteriorate due to mechanical and galvanic wear or electrolysis to which metals are subjected.

Does not peel off, does not plaque and no concretion forms. Can be applied to bronze, stainless steel, aluminum and also to the original paintwork of the bases.

First apply a coat of Metal Primer.

Color: Gray.

Application: Brush - Gun.

Dilution: Diluents No. 4.

Drying at 20°C: to the touch: 1 hour, self-recoatable: 2 hours, immersion min 16h, max 6 months.

Layers 2 - 3.

Coverage: 10m²/L.

Tesa® 62204 masking tape consists of a stable PVC backing coated with a natural rubber adhesive.

This natural rubber adhesive mass offers excellent adhesive properties on a large number of different surfaces.

Designed for short-term masking operations, it provides precise delimitation of painting areas.

Width: 24mm

Length: 66M

VC Tar2 is a two-component epoxy primer providing osmosis protection on gelcoat-coated polyester boats and anti-corrosion protection on steel and light alloy.

Can only be used below the waterline with the VC OFFSHORE and VC17 range.

- Self-leveling to give an excellent finished appearance.

- Easy to apply - can be overcoated quickly.

- No sanding between coats.

- Provides excellent waterproofing, suitable for preventive or curative osmosis treatment. Ideal primer for antifouling products in the VC range.

Type: Two-component.

Mix: 7:1 by volume.

Color: Black - White.

Capacity: 1 liter.

Application: Brush - Roller.

Dilution: VC General Thinner.

Drying at 20°C: Overcoating 2 hours minimum - 3 days maximum.

Theoretical PC: 11.30 m² / Liter.

Practical PC: 9 m² with a brush.

Note: Only usable below the waterline.

ANTIFOULING ULTRA 300 NAVY BLUE - 0.75L

• High performance antifouling

• Durable for racing sailboats and motorboats

• Can be sanded

Ultra 300 is an antifouling product effective against marine organisms, oil film, and plant and animal fouling. It is a premium antifouling product designed for boaters and professionals. Effective in both fresh and salt water. The hard, sandable finish provides antifouling performance for up to 12 months. It can be sanded to provide a smoother finish for optimal glide through the water. Ideal for high-speed boats.

Color: Navy Blue.

Application: Brush, Roller, Airless.

Dilution: Not recommended

Drying at 15°: 45 min, minimum overcoating time: 10 hours

Launch at 15°: 12 hours

Theoretical PC: 10 m²/L

Practical PC: 9 m²/L

Note: Not suitable for aluminum.