BRP CYLINDER HEAD GASKET - 0203130
The head gasket seals the combustion chamber, coolant, and oil passages between the cylinder head and engine block. It must withstand high pressure, heat, and fluid exposure.
Replace in case of leaks, overheating, loss of compression, or contamination (e.g. coolant in oil). It's always replaced when the head is removed.
DAM Marine supplies reinforced and multi-layer steel (MLS) gaskets, compatible with Volvo Penta, Yanmar, Mercruiser, OMC and other marine engines.
Cylinder head gasket for Volvo Penta 6-cylinder in-line diesel engines of the following types:
Series 41:
AD41A, AD41B, AD41D, AD41L-A
AD41P-A, AQAD41A, D41A, D41B
D41D, D41L-A, TAMD41A
TAMD41B, TAMD41D, TAMD41H-A, TAMD41H-B
TAMD41L-A, TAMD41M-A, TAMD41P-A, TAMD42B
TMD41A, TMD41B, TMD41D,TMD41L-A
42 series: KAD42A,KAD42P-A, KAMD42A, KAMD42P-A,TAMD42WJ-A,
Series 43: KAD43P-A
Series 44: KAD44P, KAD44P-B, KAD44P-C, KAMD44P-A, KAMD44P-C, TAMD41A
300 Series: KAD300-A, KAMD300-A
Seal included in the lapping kits referenced 21104 or 21105.
Joint de culasse pour moteur 8.2 litres toutes générations.
Mais également les moteurs Mercury Racing suivants :
- 450HP
- 465HP
- 500HP
- 500 BULLDOG
- 575HP 540CID - 8.9L
- 600SC 550HP 502CID 8.2L
- 800SC 750HP 872CID - 9.4L
- 1000SC RACE 950HP 542CID - 8.9L
Cylinder head gasket for YANMAR YSM12 - YSB12 - YSE12 engine.
Cylinder head gasket for YANMAR 1GM10 engine.
Premium quality cylinder head gasket for GM V8 application GM305 bore 95mm bore.
Cylinder head gasket for Yanmar engine with a thickness of 1.3mm.
Joint torique faisant office de joint de culasse sur les moteurs Johnson - Evinrude 90 à 200hp de 1991 et après.
joint de culasse pour moteurs V8 Ford de types :
- FORD 302 5 litres
- FORD 351 5.8 litres
Cylinder head gasket for YANMAR YSM8 - YSB8 - YSE8 engine.
Gasket also included in the ORB61002 running-in kit.
Cylinder head gasket for the following Volvo Penta engines:
- MD1B
- MD2B
- MD3B
89mm bore engine.
Materials included in the 21500 break-in kit.
Gasket for GM base engine distributor.
Rear cylinder head gasket for Mercruiser diesel engines with a thickness of 1.41mm.