PCM PAPER CATALYST EXHAUST ELBOW GASKET
Connection joint between the elbow and the catalysed PCM engine crossover of types 6 - 6.2 litres.
Paper joint.
Metal existing equipment under the reference RM0286.
Produit non compatible
Voir les produits compatibles
Produit compatible
Connection joint between the elbow and the catalysed PCM engine crossover of types 6 - 6.2 litres.
Paper joint.
Metal existing equipment under the reference RM0286.
Connection joint between the elbow and the catalysed PCM engine crossover of 5.7 litres.
Metal joint.
Elbow joint for catalysed PCM engine.
Exhaust elbow joint for PCM and Crusader 6 litres base engine.
Exhaust elbow joint for PCM engine.
Exhaust connection link for catalysed PCM engine of ZR and SB types.
Escape allowing the connection of the elbows R133001A and RA133002A.
Starboard Catalyst Coude for PCM engine with a blue purge cap.
Port calyzed cod for PCM engine with a blue purge cap.
Crusader 6 litre exhaust pipe with 2 water passages on the front.
Mounting with two caps for water passage in reverse of the reference R029016.
Exhaust cod for 6-litre PCM engine in direct cooling sea water with 3 dessablage pellets on the front.
Mounting without cap for water passage such as the reference R029016A.
Think about ordering the references:
- Elbow joint: RM0274A
- Collector joint: RM0276 or RM0276A
Reinforced exhaust cod for Crusader motor based on GM SB or BB with elbow in the middle of the collector and a total height of 21cm.
For mounting 16cm you refer to reference 98126.
Long fitting PCM brand exhaust elbow for Ford engine base.
Consider ordering:
- Elbow seal: RM002
- Fasteners: 4 pcs 800026
75mm exhaust diameter elbow.
Stainless steel exhaust pipe for Yanmar engine with water in the axis.
Application:
- 4JH2-UTBE
- 4JH2-DTBE
- 4JH2-DTE
- 4JH2-TBE
- 4JH2-TE
- 4JH2-UTE
- 4JH2L-HT
- 4JH3-TE
Lifting joint 129472-13520 included.
Exhaust pipe in stainless steel for Yanmar engine with water on the side.
Application:
- 4JH4-HTE1
- 4JH4-HTE
- 4JH3-HTE
- 4JH3-DTE
Lifting joint 129472-13520 included.
Stainless steel exhaust pipe for mounting with new collectors with internal water passage.
Lifting joint 128370-13231 included.
Stainless steel exhaust cod fastening 4 screws for yanmar motor with a water piquing durite in diameter 19mm or 17mm.
Stainless steel exhaust cod with a three screw fastening base for yanmar motor.
Stainless steel coude for QM series yanmar engines coming to the plate at the end of exhaust collector.