Marine Exhaust Waterlocks

Exhaust plug for water-injected exhaust systems, with rotating top. Made of corrosion-resistant synthetic materials. Excellent noise reduction.

Features :

• Excellent sound reduction

• Minimal back pressure

• Drain plug for winter storage

• Suitable for internal pipe diameters Ø 90, 102, 127, 152, 209 or 250 mm

• Capacities of 23, 75 or 130 liters

• Supplied with AISI 316 stainless steel clamping bands

• M12 thread purge

• Optional temperature sensor

Technical characteristics:

Capacity (liters): 75.

Water inlet pipe connection diameter (mm): 152.

Outlet pipe connection diameter (mm): 152.

Length (mm): 707.

Width (mm): 400.

Height (mm): 700.

Airlock position: Vertical.

% Noise Reduction: 25.

Exhaust plug for water-injected exhaust systems, with rotating top. Made of corrosion-resistant synthetic materials. Excellent noise reduction.

Features :

• Excellent sound reduction

• Minimal back pressure

• Drain plug for winter storage

• Suitable for internal pipe diameters Ø 90, 102, 127, 152, 209 or 250 mm

• Capacities of 23, 75 or 130 liters

• Supplied with AISI 316 stainless steel clamping bands

• M12 thread purge

• Optional temperature sensor

Technical characteristics:

Capacity (liters): 75.

Water inlet pipe connection diameter (mm): 127.

Outlet pipe connection diameter (mm): 152.

Length (mm): 707.

Width (mm): 400.

Height (mm): 700.

Airlock position: Vertical.

% Noise Reduction: 25.

Exhaust plug for water-injected exhaust systems, with rotating top. Made of corrosion-resistant synthetic materials. Excellent noise reduction.

Features :

• Excellent sound reduction

• Minimal back pressure

• Drain plug for winter storage

• Suitable for internal pipe diameters Ø 90, 102, 127, 152, 209 or 250 mm

• Capacities of 23, 75 or 130 liters

• Supplied with AISI 316 stainless steel clamping bands

• M12 thread purge

• Optional temperature sensor

Technical characteristics:

Capacity (liters): 23.

Water inlet pipe connection diameter (mm): 90.

Outlet pipe connection diameter (mm): 90.

Length (mm): 540.

Width (mm): 270.

Height (mm): 450.

Airlock position: Vertical.

% Noise Reduction: 25.

Special waterlocks for large boats type MG.

Excellent noise reduction, minimal back pressure.

This type of water lock is designed for modern, high-performance boats with one or two large engines that have little space to spare in the engine room. The outlet connection on top can rotate 360°, and the inlet connection is angled upwards by 45°. The MG type can only be installed in water-injected exhaust systems. Its body is made entirely of synthetic materials, therefore not susceptible to corrosion or galvanic action.

Features :

• Excellent sound reduction

• Minimal back pressure

• Drain plug for winter storage

• Suitable for internal pipe diameters Ø 102 mm

• Capacities of 23 liters

• Supplied with AISI 316 stainless steel clamping bands

• M12 thread purge

• Optional temperature sensor

Technical characteristics:

• Capacity: 23 L

• Diameter d: 127 mm

• Diameter D: 127 mm

• Diameter A: 270 mm

• Diameter B: 450 mm

Exhaust plug for water-injected exhaust systems, with rotating top. Made of corrosion-resistant synthetic materials. Excellent noise reduction.

Features :

• Excellent sound reduction

• Minimal back pressure

• Drain plug for winter storage

• Suitable for internal pipe diameters Ø 90, 102, 127, 152, 209 or 250 mm

• Capacities of 23, 75 or 130 liters

• Supplied with AISI 316 stainless steel clamping bands

• M12 thread purge

• Optional temperature sensor

Technical characteristics:

Capacity (liters): 25.

Water inlet pipe connection diameter (mm): 102.

Outlet pipe connection diameter (mm): 127.

Length (mm): 540.

Width (mm): 270.

Height (mm): 450.

Airlock position: Vertical.

% Noise Reduction: 25.

Bouchon d'échappement pour systèmes d'échappement à injection d'eau, avec partie supérieure rotative. Fabriqué en matériaux synthétiques anticorrosion. Excellente réduction du bruit.

Caractéristiques :

• Excellente réduction du son

• Contre-pression minimale

• Bouchon de vidange pour stockage hivernal

• Convient aux diamètres internes de tuyau Ø 90, 102, 127, 152, 209 ou 250 mm

• Capacités de 23, 75 ou 130 litres

• Livré avec bandes de serrage en acier inoxydable AISI 316

• Purge filetage M12

• Capteur de température en option

Caractéristiques techniques :

Capacité (litres) : 75.

Diamètre de raccordement du tuyau d'arrivée d'eau (mm) : 127.

Diamètre de raccordement du tuyau de sortie (mm) : 127.

Longueur (mm) : 707.

Largeur (mm) : 400.

Hauteur (mm) : 700.

Position du sas : Verticale.

% Réduction du bruit : 25.

Waterlock designed for modern high performance boats with one or two large engines that have limited space in the engine room.

The outlet connection at the top can be rotated 360º and the inlet connection is at a 45º upward angle. The MG type can only be installed in water-injected exhaust systems. Its body is made entirely of synthetic materials, therefore insensitive to corrosion or galvanic action.

To optimize noise reduction, flexible supports for MG and HPW watercoks can be used.

Features :

• Excellent sound reduction

• Minimal back pressure

• Drain plug for winter storage

• Suitable for internal pipe diameters Ø 90, 102, 127, 152, 209 or 250 mm

• Capacities of 23, 75 or 130 liters

• Supplied with AISI 316 stainless steel clamping bands

• M12 thread purge

• Optional temperature sensor

Technical characteristics:

Capacity (liters): 130.

Water inlet pipe connection diameter (mm): 203.

Outlet pipe connection diameter (mm): 203.

Length (mm): 890.

Width (mm): 500.

Height (mm): 750.

Airlock position: Vertical.

% Noise Reduction: 25.

Waterlock designed for modern high performance boats with one or two large engines that have limited space in the engine room.

The outlet connection at the top can be rotated 360º and the inlet connection is at a 45º upward angle. The MG type can only be installed in water-injected exhaust systems. Its body is made entirely of synthetic materials, therefore insensitive to corrosion or galvanic action.

To optimize noise reduction, flexible supports for MG and HPW watercoks can be used.

Features :

• Excellent sound reduction

• Minimal back pressure

• Drain plug for winter storage

• Suitable for internal pipe diameters Ø 90, 102, 127, 152, 209 or 250 mm

• Capacities of 23, 75 or 130 liters

• Supplied with AISI 316 stainless steel clamping bands

• M12 thread purge

• Optional temperature sensor

Technical characteristics:

Capacity (liters): 130.

Water inlet pipe connection diameter (mm): 203.

Outlet pipe connection diameter (mm): 250.

Length (mm): 890.

Width (mm): 500.

Height (mm): 750.

Airlock position: Vertical.

% Noise Reduction: 25.

Waterlock designed for modern high performance boats with one or two large engines that have limited space in the engine room.

The outlet connection at the top can be rotated 360º and the inlet connection is at a 45º upward angle. The MG type can only be installed in water-injected exhaust systems. Its body is made entirely of synthetic materials, therefore insensitive to corrosion or galvanic action.

To optimize noise reduction, flexible supports for MG and HPW watercoks can be used.

Features :

• Excellent sound reduction

• Minimal back pressure

• Drain plug for winter storage

• Suitable for internal pipe diameters Ø 90, 102, 127, 152, 209 or 250 mm

• Capacities of 23, 75 or 130 liters

• Supplied with AISI 316 stainless steel clamping bands

• M12 thread purge

• Optional temperature sensor

Technical characteristics:

Capacity (liters): 130.

Water inlet pipe connection diameter (mm): 152.

Outlet pipe connection diameter (mm): 203.

Length (mm): 890.

Width (mm): 500.

Height (mm): 750.

Airlock position: Vertical.

% Noise Reduction: 25.

Waterlocks spéciaux pour bateaux de grande taille type MG.

Excellente réduction nuisance sonre, contre pression minimale.

Ce type de water locks est conçu pour les bateaux modernes de haute performance avec un ou deux grands moteurs qui ont peu espace à épargner dans la salle des machines. La connexion de sortie sur le dessus peut tourner de 360° et la connexion d'entrée fait un angle de 45° vers le haut. Le type MG ne peut être installé que dans des systèmes échappement injectés par l'eau. Son corps est entièrement fait de matériaux synthétiques, donc non susceptible de corrosion ou d'action galvanique.

Caractéristiques :

• Excellente réduction du son

• Contre-pression minimale

• Bouchon de vidange pour stockage hivernal

• Convient aux diamètres internes de tuyau Ø 102 mm

• Capacités de 23 litres

• Livré avec bandes de serrage en acier inoxydable AISI 316

• Purge filetage M12

• Capteur de température en option

Caractéristiques techniques :

• Capacité : 23 L

• Diamètre d : 102 mm

• Diamètre D : 102 mm

• Diamètre A : 270 mm

• Diamètre B : 450 mm