YANMAR 41MM ELBOW OUTLET FITTING
Connection screwed out of yanmar exhaust elbow diameter 41mm.
Produit non compatible
Voir les produits compatibles
Produit compatible
Connection screwed out of yanmar exhaust elbow diameter 41mm.
Exhaust elbow for 8LV Yanmar engine.
Stainless steel exhaust elbow for PERKINS 4108 engine with water tapping on the rear part of the elbow (near the gasket surface) allowing the side water pipe to be positioned for engines that do not have the Bowman assembly.
TUE50 hose for exhaust outlet.
Mounting kit included:
- elbow joint
- water pipe gasket
- water pipe and screws
Coude d'échappement pour moteur Perkins perama 100 de types :
M20
M25
M30
M35
Joint de coude inclus.
Diamètre durite échappement 51mm.
Diamètre durite eau 22mm
Entraxe des vis de fixation 50mm
Optional exhaust pipe for 6BY Yanmar engine.
Stainless water connection kit for Perkins 4.108 engine including screws and seals.
Connect with the exhaust elbows.
Crusader 6 litre exhaust pipe with 2 water passages on the front.
Mounting with two caps for water passage in reverse of the reference R029016.
Exhaust cod for 6-litre PCM engine in direct cooling sea water with 3 dessablage pellets on the front.
Mounting without cap for water passage such as the reference R029016A.
Think about ordering the references:
- Elbow joint: RM0274A
- Collector joint: RM0276 or RM0276A
Reinforced exhaust cod for Crusader motor based on GM SB or BB with elbow in the middle of the collector and a total height of 21cm.
For mounting 16cm you refer to reference 98126.
Long fitting PCM brand exhaust elbow for Ford engine base.
Consider ordering:
- Elbow seal: RM002
- Fasteners: 4 pcs 800026
75mm exhaust diameter elbow.
Stainless steel exhaust pipe for Yanmar engine with water in the axis.
Application:
- 4JH2-UTBE
- 4JH2-DTBE
- 4JH2-DTE
- 4JH2-TBE
- 4JH2-TE
- 4JH2-UTE
- 4JH2L-HT
- 4JH3-TE
Lifting joint 129472-13520 included.
Exhaust pipe in stainless steel for Yanmar engine with water on the side.
Application:
- 4JH4-HTE1
- 4JH4-HTE
- 4JH3-HTE
- 4JH3-DTE
Lifting joint 129472-13520 included.
Stainless steel exhaust pipe for mounting with new collectors with internal water passage.
Lifting joint 128370-13231 included.
Stainless steel exhaust cod fastening 4 screws for yanmar motor with a water piquing durite in diameter 19mm or 17mm.
Stainless steel exhaust cod with a three screw fastening base for yanmar motor.
Stainless steel coude for QM series yanmar engines coming to the plate at the end of exhaust collector.
Exhaust pipe for the WTO engine with the elbow at the end of the collector.
Exhaust coude for former WTO installation on FORD basis.
Special order equipment please contact us.