Express Mach3 OS 3-blade stainless steel propeller with dimensions 15.6X17 in right rotation RH.

Works with 500 or 700 series hub systems to be added at time of purchase.

The new Express Mach3 OS series of large-diameter stainless steel propellers feature the latest developments and are the hallmarks of the Turning Point brand. These modifications have produced a propeller that provides excellent planing, impressive bow lift, and exceptional turning performance. The Express Mach3 OS is ideally suited to high-powered boats. It is suitable for all outboards from 90 hp and above, as well as sterndrives. The large-diameter, three-bladed propellers offer excellent fuel economy in many applications.

Hub kit for Evinrude & Johnson outboard motors (V-4 Drive, 1968-present) featuring 13 splines.

859915 Thrust washer

879637 Plastic drive sleeve

834839Q Rear adapter

859929 Nut

89961 Split pin

Express Mach3 OS 3-blade stainless steel propeller with dimensions 15.6X15 in right rotation RH.

Works with 500 or 700 series hub systems to be added at time of purchase.

The new Express Mach3 OS series of large-diameter stainless steel propellers feature the latest developments and are the hallmarks of the Turning Point brand. These modifications have produced a propeller that provides excellent planing, impressive bow lift, and exceptional turning performance. The Express Mach3 OS is ideally suited to high-powered boats. It is suitable for all outboards from 90 hp and above, as well as sterndrives. The large-diameter, three-bladed propellers offer excellent fuel economy in many applications.

Hub kit for Evinrude/Johnson outboard motors and OMC drives with 15 splines.

Caution! When installing stainless steel propellers, remove the anode attached to the bearing housing and check the clearance before operation.

835467008 Front thrust washer

879637 Plastic drive sleeve

834899Q Rear adapter

8M0107489 Nut

89961 Split pin

8M0118201 Spacer washer

Express Mach3 3-blade stainless steel propeller measuring 14.25X23 in right rotation RH.

Works with 500 or 700 series hub systems to be added at time of purchase.

Utilizing nearly 40 years of experience in racing boats and high-performance propeller design, our Express Mach3 range incorporates all the best techniques and technologies available to get the most out of your boat. Aggressive rake, radical design, streamlined cup. These 3-blade propellers excel at reaching top speed, while providing better handling and acceleration.

New designs can bring dramatic improvements in boat performance. The fuel savings will pay for the cost of a new propeller within one or two seasons, making it a wise investment.

Exclusive stainless steel, TP17™

Nearly 250% stronger and 5 times more durable than standard stainless steel, this new material allows Turning Point engineers and designers to create radical new designs that will help you get the most out of your boat.

MaxSpeed??™ Dyno Balance Process

Gives your boat a smoother ride, higher top speed, and improved fuel economy. This process is standard on every propeller and is only offered as an expensive option by other manufacturers.

The high-flow exhaust system maximizes gas flow which increases power and top speed.

Turning Point propellers feature massive exhaust vents allowing more exhaust flow and less back pressure.

Events for rapid planing.

The vents allow gases to escape, reducing the water density around the blades during acceleration. This allows the propeller to spin faster at low speeds, improving its power. More power at low speeds ensures better acceleration and faster planing.

HP Hub Kit for Mercury Engines including: Front Thrust Washer (Hardened), Steel Drive Sleeve (9.20cm - 3 5/8 in), Rear Adapter, Nut Lock and Propeller Nut.

Standard length hub for use with Fury, Tempest Plus, Mirage Plus, REV 4, Trophy Plus, Bravo I & Maximus propellers (Bravo One 400hp+ sterndrive, 1" prop shaft).

Express Mach3 3-blade stainless steel propeller measuring 14.25X21 in RH right rotation.

Works with 500 or 700 series hub systems to be added at time of purchase.

Utilizing nearly 40 years of experience in racing boats and high-performance propeller design, our Express Mach3 range incorporates all the best techniques and technologies available to get the most out of your boat. Aggressive rake, radical design, streamlined cup. These 3-blade propellers excel at reaching top speed, while providing better handling and acceleration.

New designs can bring dramatic improvements in boat performance. The fuel savings will pay for the cost of a new propeller within one or two seasons, making it a wise investment.

Exclusive stainless steel, TP17™

Nearly 250% stronger and 5 times more durable than standard stainless steel, this new material allows Turning Point engineers and designers to create radical new designs that will help you get the most out of your boat.

MaxSpeed??™ Dyno Balance Process

Gives your boat a smoother ride, higher top speed, and improved fuel economy. This process is standard on every propeller and is only offered as an expensive option by other manufacturers.

The high-flow exhaust system maximizes gas flow which increases power and top speed.

Turning Point propellers feature massive exhaust vents allowing more exhaust flow and less back pressure.

Events for rapid planing.

The vents allow gases to escape, reducing the water density around the blades during acceleration. This allows the propeller to spin faster at low speeds, improving its power. More power at low speeds ensures better acceleration and faster planing.