GM181 PISTON AFTER 1990 - STD
Piston for 4-cylinder 3-litre engine after 1990 with flat top.
Piston in standard dimension 101.60mm.

Piston for 4-cylinder 3-litre engine after 1990 with flat top.
Piston in standard dimension 101.60mm.
Set of rings for a standard size piston on GM or Ford base engines with a bore of 101.60mm.
Segment height: 2 - 2 - 4.8mm
Cock Shock Capped Pion on GM Small Block GM350 - 305 as well as V6.
Sold individually.
Complete main bearing set for GM 4 cylinder engine in standard size.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Oil pan screw with shoulder.
Complete camshaft bearing kit for GM181 3 litre 4 cylinder engine.
3/8 NPT - 16.66mm diameter plug with BTR female head.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Rear vilebrequin joint including mounting required for multi-engine base GM 4 cylinders, V6 and V8.
For mounting with a slight sticker on the joint you refer to reference 5512.
Rear seal for crankshaft oil seal housing 1 pc.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Set of bearings for a standard size connecting rod with a diameter of 53.34mm and a width of 21.3mm.
Please note that for recent 4-cylinder 3-litre GM181 engines ONLY which have bearings with a width of 19mm, please refer to reference 23-804982.
Fitting allowing the oil filter to be attached to the GM engine block.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Stud kit for fixing the coupling damper including nut and washer.
Stud length: 49mm.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Gasket for tappet cover hatch on GM 4 cylinder engine.
Gasket for GM base engine distributor.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Oil filter height 13 cm - 13/16 X 16NPT
For an oil filter height 8 cm you refer to the reference R134.
Camshaft for GM181 and GM153 4-cylinder engine.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Oil pressure sensor for non mounting VDO with 2 indicators, double posts.
Dimensions: 1/8-27NPT - 80PSI
Hydraulic powder flat.
Sheet metal timing case for 4-cylinder and 6-cylinder in-line engines.
Consider the 6936S oil seal and the AP355 reassembly seal or the TCS13198 kit.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.