4-TERMINAL RELAY 24V 85AMP WATERPROOF
4-terminal 24 volt relay with black waterproof coating with a capacity of 85 Amps continuous.
4-terminal 24 volt relay with black waterproof coating with a capacity of 85 Amps continuous.
Capacitor for Mallory brand igniter.
Left cylinder head ignition coil for Indmar Raptor type engines after 2018 with serial number 207510 and higher.
Cylinder numbers: 5 - 6 - 7 - 8
Please note: please compare with reference 597097 because the assembly is different depending on the cylinder head.
Right cylinder head ignition coil for Indmar Raptor type engines after 2018 with serial number 207510 and higher.
Cylinder numbers: 1 - 2 - 3 - 4
Please note: please compare with reference 597100 because the assembly is different depending on the cylinder head.
Ignition coil for Honda BF175 to BF225 engine.
Complete spark plug wire set including coil wire for OMC FORD 7.5 litre 460 engine.
Complete spark plug wire set for GM496 8.1 litre V8 engine with 8 coils.
Complete set of spark plug wires including coil wire for conventional Mallory type distributors with a flat distributor cap.
Thermal circuit breakers, single-pole 80 Amperes for surface mounting.
The visible reset button allows you to see whether the circuit breaker is engaged or not.
These circuit breakers are generally used in auxiliary and accessory circuits.
Amplifier circuit breakers comply with SAE J1117 and J1625 standards for ignition protection.
• Agency Approvals: UL Approved 32V DC
• Interruption rating: 300 A at 30 V
• Ignition protection: SAE J1625 and J1171
• Material(s): Thermoset plastic UL Rating 94VO
• Temperature range: -32C to 92C
Démarreur 9 dents à réduction prévu pour une fixation sur le bloc moteur le long du carter d'huile par 2 vis droites alignées.
Fixation :
- Vis courte PG600
- Vis longue PG601R
Visserie non inclus.
Démarreur remplaçant les anciennes génération ne disposant pas de réduction de type DR9597.
Montage pour volant moteur de diamètre 32.4 cm.
Démarreur existant à un tarif et une qualité différente sous la référence DR30460.
3-terminal relay for Crusader motor - Chriscraft isolated by the base for Crusader MDU series starters.
Alternateur 12v 125 ampères pour moteur Yanmar disposant d'une courroie serpentine.
Poulie de diamètre 65mm.
Ignition harness kit with 6 wires for Mercury V6 135 to 300HP engine.
The wire ends have female 90° elbows.
This kit also fits Mercury 3 and 4 cylinder engines.
Equipment also available individually under reference AP0009-1
Faisceau d'adaptation pour tableau Medaillon.
Universal engine harness for GM carbureted base engines with conventional or Prestolite electronic ignition.
Beam that can be adapted to a multitude of applications.
Motor output connection 8 square male pins.
For a complete hardware assembly to be used in combination with the references:
- 6117-25
- 6107-03
Démarreur pour moteurs Yamaha suivants :
300HP F - LF 2007 - 2009
350HP après 2007
425HP après 2007