MERCRUISER DIESEL OIL PRESSURE SENSOR
Oil pressure sensor for Mercruiser Diesel engines.
Oil pressure sensor for Mercruiser Diesel engines.
Oil and air pressure sensor
Isolated from the mass
Alarm switch
Not suitable for measuring water pressure
Alert: 0.8 bar
Measuring range: 0 - 10 bar
Pressure: 10 bar
Depth: 19.5 mm
Thread: 1/8-27 NPTF
Voltage: 6 - 24 V
Universal engine harness for GM carbureted base engines with conventional or Prestolite electronic ignition.
Beam that can be adapted to a multitude of applications.
Motor output connection 8 square male pins.
For a complete hardware assembly to be used in combination with the references:
- 6117-25
- 6107-03
305 mm (12 in.) beam.
To convert the newer 3-pin Packard connector hydraulic lift pump harness to the older 3-pin connector remote control harness.
9-tooth reduction starter designed for attachment to the engine block along the oil pan using 2 aligned straight screws.
Fixing:
- Short screw PG600
- Long screw PG601R
Screws not included.
Starter replacing the older generation without DR9597 type reduction.
Mounting for flywheel with a diameter of 32.4 cm.
Démarreur pour moteur en rotation standard LH disposant d'une fixation sur le haut de la cloche d'accouplement par 2 vis.
Montage à l'opposé du bloc moteur.
3-terminal relay for Crusader motor - Chriscraft isolated by the base for Crusader MDU series starters.
Relais de démarreur 4 bornes pour moteur Johnson - Evinrude entre 9.9 et 15HP.
Montage 2 ou 4 temps isolé par la base.
Glow plug relay for the following Mercruiser diesel engines:
- 530D-TA
- 636D-TA
- D183
- D3.0L
- D3.6L
- D4.2L
- D254 TURBO AC
Relais 4 bornes isolé par la base pour moteur Mercury et Mercruiser.
Equivalent au SW101 mais avec un étrier courbé.
Montage très fréquent sur l'ensemble des moteurs inboards et embases.
Alternateur 12V 60 ampères disposant d'une poulie de diamètre 45mm. pour moteurs Yanmar suivants :
- 2YM15
- 3YM20
- 3YM30
- 3JH3E
- 3JH4E
- 4JH3E
- 4JH3-CE
- 4JH3-TCE
12 Volt 70 Amp alternator for Crusader engine - PCM with a pulley for a 65mm diameter serpentine belt.