STAINLESS STEEL EXHAUST ELBOW VOLVO D2-55
Stainless steel exhaust elbow for Volvo Penta D2 engine, including the necessary mounting hardware:
- Water connection 859836
- Water tap connection seal 859835
- Elbow joint 888596
- Screws
Stainless steel exhaust elbow for Volvo Penta D2 engine, including the necessary mounting hardware:
- Water connection 859836
- Water tap connection seal 859835
- Elbow joint 888596
- Screws
Tuyau d'échappement humide Trident Flex 121°C disposant d'une double enveloppe pour une meilleure longévité, procurant un rayon de courbure sans pincement plus important que les normes standard.
Durite disposant d'une surface lisse pour un meilleur serrage des colliers.
Vendu au mètre linéaire.
Normes : SAE J2006-R2, ABYC, NMMA P-1, Lloyd's
One-piece exhaust gasket for Yanmar engine with wave-shaped connection.
Plate gasket for Chriscraft motor with Riva mounting.
Exhaust manifold for Mercruiser V8 BB GM454 and GM502 engines.
Mounting hardware included.
Stainless steel exhaust elbow with 4 screw fixing for YANMAR engine with a 22mm diameter water connection hose.
For an elbow with a 17mm diameter water connection, there is a straight reducing fitting, reference 16828-1, which allows the diameter to be reduced from 22 to 17mm.
Stainless steel exhaust elbow for Yanmar 6LY series engine.
Reassembly gasket included.
Featuring a Ø 128mm exhaust outlet and a Ø 38mm water inlet
Exhaust elbow gasket for Perkins 4236.
Trident Flex 121°C wet exhaust pipe features a double jacket for increased durability, providing a larger pinch-free bend radius than standard standards.
Hose with a smooth surface for better tightening of the clamps.
Sold by the linear meter.
Standards: SAE J2006-R2, ABYC, NMMA P-1, Lloyd's
Gasket for Mercruiser diesel engine exhaust manifolds.
Exhaust manifold for Chriscraft engine featuring 3-point cooling mounting.
Exhaust manifold for OMC and Volvo Penta engines based on Ford 5L or 5.8L carburetor or injection.
Exhaust manifold for OMC or Volvo Penta 3L 4-cylinder engine with a Holley 2-barrel carburetor.
Trident Flex coolant hose features a double jacket for increased durability, providing a larger pinch-free bend radius than standard standards.
Hose with a smooth surface for better tightening of the clamps.
Sold by the linear meter.
Standards: SAE J2006-R2, ABYC, NMMA P-1, Lloyd's
Exhaust gasket for Yanmar engine made of graphite material.
4 or 6 pieces required depending on application.