Marine exhaust systems for boats - Robust and reliable solutions - Page 35

Combined with a silencer, the gooseneck saves installation time and space while maintaining the essential qualities of a good exhaust system with incredibly negligible back pressure. Prevents water from backing up the exhaust.

Suitable for pipes with an internal diameter of Ø 60 mm.

*Interchangeable connector for 65 mm hose (SET00025) available separately.

Fully rotating sections and pipe fittings ensure easy installation. Comes with a pipe fitting to connect the ventilation.

Features :

Capacity (liters): 10.

Length (mm): 285.3.

Width (mm): 160.

Height (mm): 646.4.

Airlock position: Vertical.

% Noise Reduction: 25.

Combined with a silencer, the gooseneck saves installation time and space while maintaining the essential qualities of a good exhaust system with incredibly negligible back pressure. Prevents water from backing up the exhaust.

Suitable for pipes with an internal diameter of Ø 50 mm

Fully rotating sections and pipe fittings ensure easy installation. Comes with a pipe fitting to connect the ventilation.

Features :

Capacity (liters): 3.

Length (mm): 110.

Width (mm): 110.

Height (mm): 494.

Airlock position: Vertical.

% Noise Reduction: 25.

Combined with a silencer, the gooseneck saves installation time and space while maintaining the essential qualities of a good exhaust system with incredibly negligible back pressure. Prevents water from backing up the exhaust.

Suitable for pipes with an internal diameter of Ø 45 mm

Fully rotating sections and pipe fittings ensure easy installation. Comes with a pipe fitting to connect the ventilation.

Features :

Capacity (liters): 3.

Length (mm): 110.

Width (mm): 110.

Height (mm): 494.

Airlock position: Vertical.

% Noise Reduction: 25.

Combined with a silencer, the gooseneck saves installation time and space while maintaining the essential qualities of a good exhaust system with incredibly negligible back pressure. Prevents water from backing up the exhaust.

Suitable for pipes with an internal diameter of Ø 40 mm

Fully rotating sections and pipe fittings ensure easy installation. Comes with a pipe fitting to connect the ventilation.

Features :

Capacity (liters): 3.

Length (mm): 110.

Width (mm): 110.

Height (mm): 494.

Airlock position: Vertical.

% Noise Reduction: 25.

Durite d'échappement en sortie de coude pour moteur Mercruiser 4 cylindres.

Dimensions 76 x 102mm.

Trident Flex 121°C wet exhaust sleeve with a diameter of 95mm and a length of 17cm, featuring a double jacket for increased longevity, providing a larger pinch-free bend radius than standard standards.

Hose with a smooth surface for better tightening of the clamps.

Sold by the linear meter.

Standards: SAE J2006-R2, ABYC, NMMA P-1, Lloyd's

Volvo D3 Exhaust Elbow Cooling Hose.

Tuyau d'échappement humide Trident sans armature métallique , plus souple que les durites avec armatures.

Durite disposant d'une surface lisse pour un meilleur serrage des colliers mais ne plus pas être courbée.

Vendu en section de 1 mètre uniquement.

Normes : SAE J2006-R2, ABYC, NMMA P-1, Lloyd's

Tuyau d'échappement humide Trident Flex 121°C disposant d'une double enveloppe pour une meilleure longévité, procurant un rayon de courbure sans pincement plus important que les normes standard.

Durite disposant d'une surface lisse pour un meilleur serrage des colliers.

Vendu au mètre linéaire.

Normes : SAE J2006-R2, ABYC, NMMA P-1, Lloyd's

Exhaust hose for Volvo Penta V6 - V8 engine with 95mm diameter.

Exhaust hose diameter 90 and 100mm, height 75mm.

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC90SV

For hose (inner diameter): 90 mm

Dimension A: hole diameter 91 mm

Dimension B: diameter 123 mm

Dimension C: 110 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of a synthetic body. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC90PV

For hose (inner diameter): 90 mm

Dimension A: hole diameter 97 mm

Dimension B: diameter 140 mm

Dimension C: 95 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC75SV

For hose (inner diameter): 75 mm

Dimension A: hole diameter 77 mm

Dimension B: diameter 110 mm

Dimension C: 93 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of a synthetic body. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC75PV

For hose (inner diameter): 75 mm

Dimension A: hole diameter 97 mm

Dimension B: diameter 140 mm

Dimension C: 95 mm