GM181 4 CYLINDERS EXHAUST MANIFOLD GASKET
Exhaust manifold gasket for GM 4 cylinder 3 liter GM181 engine.
Full gasket without water tap for Chrysler manifold.
Starboard exhaust manifold for PCM engine types H5 - H6 with temperature sensor measuring the temperature of the liquid and not the material.
Assembly with a probe on the SIDE and not on the top of the collector.
Anode gasket for Volvo Penta catalytic manifold hatch.
Port exhaust manifold for PCM engine types H5 - H6 with temperature sensor measuring the temperature of the liquid and not the material.
Assembly with a probe on the SIDE and not on the top of the collector.
Exhaust collector for WTO 3-litre GM181 4-cylinder engine with a Rochester 2-body carburettor parallel to the collector as well as a complete cooling plate.
Genuine Mercruiser OEM exhaust manifold for 8.1L GM496 and new generation 8.2L GM502 engines.
Manifold gasket included.
Exhaust manifold gasket kit for Volvo Penta 4 cylinder engines:
AQ120B, AQ125A
AQ140A, BB140A
230A, 230B
AQ125B
AQ131A, AQ131B, AQ131C, AQ131D
AQ145A, AQ145B, BB145A
250A, 250B
AQ151A, AQ151B, AQ151C
Exhaust horn flap width 63mm, length 79mm present in the horn of the Cobra bases.
4 cylinder application.
Stainless steel elbow plate for Crusader 96068 and 97924 elbows.
Stainless steel water connection kit for Perkins 4.108 engine including screws and gasket.
Fitting included with exhaust elbows.
Raised exhaust elbow for Crusader engine based on GM SB or BB with the elbow in the middle of the manifold and a total height of 21cm.
For the 16cm assembly, refer to reference 98126.
Exhaust elbow for Crusader 6 litre engine with 2 water passages on the front.
Assembly with two plugs for water passage in reverse of reference R029016.
Round exhaust elbow for OMC 4 cylinder 2.5L OR 3L engine.
Stainless steel elbow for Yanmar QM series engines which screws onto the plate at the end of the exhaust manifold.