Marine exhaust for boats | Manifolds, elbows, silencers and accessories (36)

ANTI-SIPHON ELBOW TYPE ASD 13/19/25/32 MM WITH PIPE

RÉF. DM_VE_ASDH | VETUS

Anti-siphon elbow without valve and with ventilation pipe, connection 13 - 32 mm.

Can be used as a drainage system or toilet.

Interchangeable with the AIRVENT type and have the same fixing center distances

Comes complete with fitting, hose clamps and 2m of hose. Non-valve anti-siphon elbows must be fitted with a ventilation pipe.

The air vent fitting rotates 360°. (Includes a 2 m hose and skin fittings). In addition, the valve can be serviced without removing the vent from the wall and no tools are required for this. For replacement, a set of 5 valves is available as a spare part.

A 13 mm diameter flexible hose can be directly connected to the elbow connections

Can be connected to pipes with inner diameters of 13, 19, 25 and 32 mm.

Size :

Width (mm): 68.

Length (mm): 96.

Height (mm): 133.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€126.00 VAT included

€105.00 VAT excluded

ANTI-SIPHON ELBOW TYPE ASD 38 MM WITH PIPE

RÉF. DM_VE_ASD38H | VETUS

Anti-siphon elbow without valve and with hose. With 4m of 8 x 14mm ventilation hose, suitable for 38mm pipes. Ideal for toilets or holding tanks installed below the waterline.

The air bleed fitting rotates 360°. (Includes 2m hose and skin fittings)

A 38 mm diameter flexible hose can be connected directly to the elbow connections. Mount each hose connection with a stainless steel clamp.

Size :

Length (mm): 129.

Height (mm): 107.

Pipe connection diameter (mm): 38.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€126.00 VAT included

€105.00 VAT excluded

EXHAUST TEMPERATURE ALARM SENSOR FOR MF/MV/LSG/MGS/MGL/MGP

RÉF. DM_VE_XHSM | VETUS

Exhaust temperature alarm probe, two probes available for VETUS mounting.

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection.

Use the XHSH type sensor for mounting in the exhaust pipe

Note: Temperature sensors and alarm unit must be ordered separately. In the case of a

twin-engine installation, 2 sensors can be connected to one alarm unit.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€157.50 VAT included

€131.25 VAT excluded

EXHAUST TEMPERATURE ALARM PROBE FOR EXHAUST PIPE

RÉF. DM_VE_XHSH | VETUS

Exhaust temperature alarm probe, two probes available for VETUS mounting.

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection.

Use the XHSH type sensor for mounting in the exhaust pipe

Note: Temperature sensors and alarm unit must be ordered separately. In the case of a

twin-engine installation, 2 sensors can be connected to one alarm unit.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€157.50 VAT included

€131.25 VAT excluded

24V EXHAUST TEMPERATURE ALARM INDICATOR BEIGE

RÉF. DM_VE_XHI24W | VETUS

Indicator for VETUS exhaust temperature alarm, to be mounted with the XHSM or XHSH probes.

Dimension Ø 52 mm, total diameter 62 mm.

Mounting depth 40 mm.

Suitable for 24 Volt DC

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection

Use the XHSH type sensor for mounting in the exhaust pipe

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€118.00 VAT included

€98.33 VAT excluded

24V BLACK EXHAUST TEMPERATURE ALARM INDICATOR

RÉF. DM_VE_XHI24B | VETUS

Indicator for VETUS exhaust temperature alarm, to be mounted with the XHSM or XHSH probes.

Dimension Ø 52 mm, total diameter 62 mm.

Mounting depth 40 mm.

Suitable for 24 Volt DC

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection

Use the XHSH type sensor for mounting in the exhaust pipe

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€118.00 VAT included

€98.33 VAT excluded

12V EXHAUST TEMPERATURE ALARM INDICATOR BEIGE

RÉF. DM_VE_XHI12W | VETUS

Indicator for VETUS exhaust temperature alarm, to be mounted with the XHSM or XHSH probes.

Dimension Ø 52 mm, total diameter 62 mm.

Mounting depth 40 mm.

Suitable for 12 Volt DC

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection

Use the XHSH type sensor for mounting in the exhaust pipe

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€118.00 VAT included

€98.33 VAT excluded

12V BLACK EXHAUST TEMPERATURE ALARM INDICATOR

RÉF. DM_VE_XHI12B | VETUS

Indicator for VETUS exhaust temperature alarm, to be mounted with the XHSM or XHSH probes.

Dimension Ø 52 mm, total diameter 62 mm.

Mounting depth 40 mm.

Suitable for 12 Volt DC

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection

Use the XHSH type sensor for mounting in the exhaust pipe

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€118.00 VAT included

€98.33 VAT excluded

EXHAUST GAS SEPARATOR Ø 75 WITH Ø 95 MM CONNECTION, 360° ROTATABLE

RÉF. DM_VE_LGS9075 | VETUS

The VETUS gas/water separator has a dual function. It separates the injected raw cooling water from the exhaust gases and also functions as a gooseneck. Particularly important for generator sets, the separator reduces exhaust noise and discharges the cooling water below the waterline, thus avoiding the characteristic splashing noise.

With a 20 litre capacity and a 75mm connection, this separator is suitable for engines up to 125hp.

The splitter's compact design ensures it will fit most boats.

Features :

Rotating pipe fittings for easy installation

75mm cooling water drain

Comes with a stainless steel (AISI 316) mounting bracket with synthetic straps

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€511.50 VAT included

€426.25 VAT excluded

EXHAUST GAS SEPARATOR Ø 50 WITH Ø 75 MM CONNECTION, 360° ROTATABLE

RÉF. DM_VE_LGS7550 | VETUS

The VETUS gas/water separator has a dual function. It separates the injected raw cooling water from the exhaust gases and also functions as a gooseneck. Particularly important for generator sets, the separator reduces exhaust noise and discharges the cooling water below the waterline, thus avoiding the characteristic splashing noise.

Features :

360º rotating pipe fittings for 75mm internal pipe diameters

50mm cooling water drain

Comes with a stainless steel (AISI 316) mounting bracket with synthetic straps

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€511.50 VAT included

€426.25 VAT excluded

EXHAUST GAS SEPARATOR Ø 50 WITH Ø 60 MM CONNECTION, 360° ROTATABLE

RÉF. DM_VE_LGS6050 | VETUS

The VETUS gas/water separator has a dual function. It separates the injected raw cooling water from the exhaust gases and also functions as a gooseneck. Particularly important for generator sets, the separator reduces exhaust noise and discharges the cooling water below the waterline, thus avoiding the characteristic splashing noise.

Features :

360º rotating pipe fittings for 50mm internal pipe diameters

50mm cooling water drain

Comes with a stainless steel (AISI 316) mounting bracket with synthetic straps

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€511.50 VAT included

€426.25 VAT excluded

EXHAUST GAS SEPARATOR Ø 38 MM WITH Ø 50 MM CONNECTION

RÉF. DM_VE_LGS5038 | VETUS

The VETUS gas/water separator has a dual function. It separates the injected raw cooling water from the exhaust gases and also functions as a gooseneck. Particularly important for generator sets, the separator reduces exhaust noise and discharges the cooling water below the waterline, thus avoiding the characteristic splashing noise.

Features :

360º rotating pipe fittings for 50mm internal pipe diameters

38mm cooling water drain

Comes with a stainless steel (AISI 316) mounting bracket with synthetic straps

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€414.50 VAT included

€345.42 VAT excluded

EXHAUST GAS SEPARATOR Ø 38 MM WITH Ø 45 MM CONNECTION

RÉF. DM_VE_LGS4538 | VETUS

The VETUS gas/water separator has a dual function. It separates the injected raw cooling water from the exhaust gases and also functions as a gooseneck. Particularly important for generator sets, the separator reduces exhaust noise and discharges the cooling water below the waterline, thus avoiding the characteristic splashing noise.

Features :

360º rotating pipe fittings for 45mm internal pipe diameters

38mm cooling water drain

Comes with a stainless steel (AISI 316) mounting bracket with synthetic straps

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€414.50 VAT included

€345.42 VAT excluded

EXHAUST GAS SEPARATOR Ø 38 MM WITH Ø 40 MM CONNECTION

RÉF. DM_VE_LGS4038 | VETUS

The VETUS gas/water separator has a dual function. It separates the injected raw cooling water from the exhaust gases and also functions as a gooseneck. Particularly important for generator sets, the separator reduces exhaust noise and discharges the cooling water below the waterline, thus avoiding the characteristic splashing noise.

Features :

360º rotating pipe fittings for 40mm internal pipe diameters

38mm cooling water drain

Comes with a stainless steel (AISI 316) mounting bracket with synthetic straps

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€414.50 VAT included

€345.42 VAT excluded

GOOSENECK TYPE NLPG 90MM

RÉF. DM_VE_NLPG90 | VETUS

Combined with a silencer, the gooseneck saves installation time and space while maintaining the essential qualities of a good exhaust system with incredibly negligible back pressure. Prevents water from backing up the exhaust.

Suitable for pipes with an internal diameter of Ø 90 mm.

*Interchangeable connector for 65 mm hose (SET00025) available separately.

Fully rotating sections and pipe fittings ensure easy installation. Comes with a pipe fitting to connect the ventilation.

Features :

Capacity (liters): 10.

Length (mm): 285.3.

Width (mm): 160.

Height (mm): 646.4.

Airlock position: Vertical.

% Noise Reduction: 25.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€365.50 VAT included

€304.58 VAT excluded

GOOSENECK TYPE NLPG 75MM

RÉF. DM_VE_NLPG75 | VETUS

Combined with a silencer, the gooseneck saves installation time and space while maintaining the essential qualities of a good exhaust system with incredibly negligible back pressure. Prevents water from backing up the exhaust.

Suitable for pipes with an internal diameter of Ø 75 mm.

*Interchangeable connector for 65 mm hose (SET00025) available separately.

Fully rotating sections and pipe fittings ensure easy installation. Comes with a pipe fitting to connect the ventilation.

Features :

Capacity (liters): 10.

Length (mm): 285.3.

Width (mm): 160.

Height (mm): 646.4.

Airlock position: Vertical.

% Noise Reduction: 25.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€365.50 VAT included

€304.58 VAT excluded

GOOSENECK TYPE NLPG 60MM

RÉF. DM_VE_NLPG60 | VETUS

Combined with a silencer, the gooseneck saves installation time and space while maintaining the essential qualities of a good exhaust system with incredibly negligible back pressure. Prevents water from backing up the exhaust.

Suitable for pipes with an internal diameter of Ø 60 mm.

*Interchangeable connector for 65 mm hose (SET00025) available separately.

Fully rotating sections and pipe fittings ensure easy installation. Comes with a pipe fitting to connect the ventilation.

Features :

Capacity (liters): 10.

Length (mm): 285.3.

Width (mm): 160.

Height (mm): 646.4.

Airlock position: Vertical.

% Noise Reduction: 25.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€365.50 VAT included

€304.58 VAT excluded

GOOSENECK TYPE NLPG 50MM

RÉF. DM_VE_NLPG50 | VETUS

Combined with a silencer, the gooseneck saves installation time and space while maintaining the essential qualities of a good exhaust system with incredibly negligible back pressure. Prevents water from backing up the exhaust.

Suitable for pipes with an internal diameter of Ø 50 mm

Fully rotating sections and pipe fittings ensure easy installation. Comes with a pipe fitting to connect the ventilation.

Features :

Capacity (liters): 3.

Length (mm): 110.

Width (mm): 110.

Height (mm): 494.

Airlock position: Vertical.

% Noise Reduction: 25.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€250.50 VAT included

€208.75 VAT excluded

GOOSENECK TYPE NLPG 45MM

RÉF. DM_VE_NLPG45 | VETUS

Combined with a silencer, the gooseneck saves installation time and space while maintaining the essential qualities of a good exhaust system with incredibly negligible back pressure. Prevents water from backing up the exhaust.

Suitable for pipes with an internal diameter of Ø 45 mm

Fully rotating sections and pipe fittings ensure easy installation. Comes with a pipe fitting to connect the ventilation.

Features :

Capacity (liters): 3.

Length (mm): 110.

Width (mm): 110.

Height (mm): 494.

Airlock position: Vertical.

% Noise Reduction: 25.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€250.50 VAT included

€208.75 VAT excluded

GOOSENECK TYPE NLPG 40MM

RÉF. DM_VE_NLPG40 | VETUS

Combined with a silencer, the gooseneck saves installation time and space while maintaining the essential qualities of a good exhaust system with incredibly negligible back pressure. Prevents water from backing up the exhaust.

Suitable for pipes with an internal diameter of Ø 40 mm

Fully rotating sections and pipe fittings ensure easy installation. Comes with a pipe fitting to connect the ventilation.

Features :

Capacity (liters): 3.

Length (mm): 110.

Width (mm): 110.

Height (mm): 494.

Airlock position: Vertical.

% Noise Reduction: 25.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand

€250.50 VAT included

€208.75 VAT excluded

Oil circuit

Upper Engine

Lower Engine

Exhaust

Electrical parts

Power steering and Steering

Marine exhaust systems for boats - Robust and reliable solutions - Page 36

895 item(s)

ANTI-SIPHON ELBOW TYPE ASD 13/19/25/32 MM WITH PIPE

ANTI-SIPHON ELBOW TYPE ASD 38 MM WITH PIPE

EXHAUST TEMPERATURE ALARM SENSOR FOR MF/MV/LSG/MGS/MGL/MGP

EXHAUST TEMPERATURE ALARM PROBE FOR EXHAUST PIPE

24V EXHAUST TEMPERATURE ALARM INDICATOR BEIGE

24V BLACK EXHAUST TEMPERATURE ALARM INDICATOR

12V EXHAUST TEMPERATURE ALARM INDICATOR BEIGE

12V BLACK EXHAUST TEMPERATURE ALARM INDICATOR

EXHAUST GAS SEPARATOR Ø 75 WITH Ø 95 MM CONNECTION, 360° ROTATABLE

EXHAUST GAS SEPARATOR Ø 50 WITH Ø 75 MM CONNECTION, 360° ROTATABLE

EXHAUST GAS SEPARATOR Ø 50 WITH Ø 60 MM CONNECTION, 360° ROTATABLE

EXHAUST GAS SEPARATOR Ø 38 MM WITH Ø 50 MM CONNECTION

EXHAUST GAS SEPARATOR Ø 38 MM WITH Ø 45 MM CONNECTION

EXHAUST GAS SEPARATOR Ø 38 MM WITH Ø 40 MM CONNECTION

GOOSENECK TYPE NLPG 90MM

GOOSENECK TYPE NLPG 75MM

GOOSENECK TYPE NLPG 60MM

GOOSENECK TYPE NLPG 50MM

GOOSENECK TYPE NLPG 45MM

GOOSENECK TYPE NLPG 40MM