SEGMENTS VOLVO PENTA SERIE 44 - 300 - 3586758
Nos segments sont vendus à l'unité- soit un jeu de segment pour 1 piston.
Jeu de segments pour moteurs Volvo Penta suivants :
- KAD300-A
- KAD44P
- KAD44P-B
- KAD44P-C
- KAMD300-A
- KAMD44P-A
- KAMD44P-C
Nos segments sont vendus à l'unité- soit un jeu de segment pour 1 piston.
Jeu de segments pour moteurs Volvo Penta suivants :
- KAD300-A
- KAD44P
- KAD44P-B
- KAD44P-C
- KAMD300-A
- KAMD44P-A
- KAMD44P-C
Jeu de segments pour un piston en cote 0.30 de moteur GM 5 litres disposant de segments d'épaisseur
5/64 x 5/64 x 3/16
Piston ring set for a Mercruiser 3.7 Liter 470 engine cylinder in standard size with dimensions 5/64 x 5/64 x 3/16.
Hardware also compatible with Ford V8 460 7.5 liter engines.
Set of bearings for a connecting rod in dimension 0.30.
Jeu de coussinets pour une bielle en cote 0.20.
Jeu de segments pour un piston en cote standard aux dimensions 2 x 2 x 4mm.
Set of rings for a piston in dimension 0.20 with dimensions 2 x 2 x 4.76mm.
Kit cylindrée complet pour moteurs Volvo Penta série 42 suivant :
Inclus kit joints de chemise.
- KAD42A
- KAD42B
- KAMD42A
- KAMD42B
- TAMD42B
Matériel à utiliser en complément du graisseur 1542320 non inclus.
Support moteur pour application universel mais notamment Volvo Penta disposant des caractéristiques suivantes :
Entraxe : 182mm
Largueur : 112mm
Hauteur totale : 68mm
Dureté : 65
Filetage : M20
Note : support à utiliser en complément du kit fixation SP18004-HD
Kit de fixation complet incluant rondelles , écrou et tige fileté pour support moteur série SP6043 M20.
Les kits de montages HD permettent un alignement plus fin que les kits de fixations standard.
De part leurs conceptions les kits HD offrent la capacité de ligner 5 à 10 mm en fonction du filetage. ( 10mm pour M20).
La zone d'appui de l'écrou inférieur offrant une plus grande surface , l'ajustement devient plus facile , précis et viable dans le temps. Une mise en contraire de 48 heures est nécessaire avant de verrouiller l'ensemble du groupe.
Ces kits répondent aux besoins des moteurs récents à hauts régimes.
Motor support center distance 76mm height 34mm to be used in addition to the SP8001 axle.
Load: 70 kg
Motor support center distance 76mm height 34mm to be used in addition to the SP8001 axle.
Load: 105 KG
Jeu complet de coussinets de paliers en cote standard 62.19 mm pour moteur GM V6 4.3L et 3.8L.
Set of bearings for a standard 27mm width connecting rod for engines of the following types:
AQ60F, AQ90, AQ95, AQ95A, AQ110, AQ120
BB30, BB100
MB18
AQ105A, AQ115A, AQ115B
AQ130A, AQ130B, AQ130C, AQ130D
BB115A, BB115B, BB115C
MB20A, MB20B, MB20C
For block with 6 fixing screws for the crankshaft oil seal holder.
Set of bearings for a connecting rod in dimension 0.30.
Set of bearings for a connecting rod in repair dimension 0.25mm.
Set of bearings for a connecting rod in repair dimension 0.25mm.
Volvo Penta diesel connecting rod head bushing.
Piston without rings for GM454 7.4 litre generation V and VI engine in repair dimension 0.20.
Segments with the following dimensions: 1.98 x 1.98 x 4.76MM.
Scraper segment depth: 3.20mm
Piston en cote standard 101.60mm disposant de segments minces de types 1.5x1.5x3mm.
Piston for GM V8 engine with 95.75mm bore, 0.30 dimension.
Piston without rings for GM454 7.4 litre generation IV engine in repair dimension 0.60.
Piston avec axe fournis sans segmentation pour moteur base GM en cote réparation 0.75mm.
Piston for 8.1 litre engine in repair dimension 0.30 with a pin with circlips.