GM225 STD SEGMENTS
Set of rings for a standard piston with dimensions 5/64 x 5/64 x 3/16
Set of rings for a standard piston with dimensions 5/64 x 5/64 x 3/16
Set of rings for a piston in dimension 0.40 with dimensions 1.5 x 1.5 x 3mm.
Complete displacement kit for the following Volvo Penta 31 and 41 series engines:
- AD31B
- AD31D-A
- AD31XD
- AD41B
- AD41D
- D41B
- D41D
- TAMD31B
- TAMD31D
- TAMD41B
- TAMD41D
- TMD31B
- TMD31D
- TMD41B
- TMD41D
Equipment to be used in addition to Volvo Penta 1542320 greaser not included.
Rear engine mount for Yanmar 2GM and 2YM15 series engines with an SD20 - SD25 saildrive base.
Note on rubber/engraved: 150
Maximum load: 150kg
Silent block for Volvo Penta engines of series 40 - 41 -42 in particular.
Features :
- Total height: 55mm
- Diameter: 75mm
- Center distance: 105mm
- Thread: M16 fine pitch
Mounting kit under reference 22323-1 to be used only for this series of engine mounts.
Less center distance than the SP171609 series brackets.
Complete kit including a metal head gasket for Volvo Penta MD2010 engine.
Set of 8 standard size pistons without rings for GM325 5.3L V8 engine.
Kit including:
4 left pistons + axle
4 straight pistons + pin
Mounting for segments with dimensions 1.2x1.5x2.5mm
For any information, do not hesitate to contact us.
Piston for 4-cylinder 3-litre engine after 1990 with flat top.
Piston in repair dimension 0.20.
Piston with standard size pin without segmentation for GM base engine with a bore of 98.42mm.
Our segments are sold individually - one set of segments for 1 piston.
Timing cover for 454 and 502 generation 4 engines.