53.57MM DESANDING TABLET
Desanding tablet with a diameter of 2"-7/64 - 53.57mm.
Camshaft insert for GM V8 - V6 engine.
Desanding tablet with a diameter of 2"-7/64 - 53.57mm.
Camshaft insert for GM V8 - V6 engine.
Bague caoutchouc pour vérin de trim Mercruiser.
Exhaust pushrod for GM454 - 502 engine with flat tappets.
Length: 233 mm
Diameter: 7.93 mm - 5/16
Vis de bielle vendus à l'unité 3/8-24 pour moteur base GM V6 - SB.
Matériel à utiliser en combinaison de l'écrou CRN731.
Un visuel de votre montage en place vous sera toujours demandé pour définir le type d'épaulement dont vous disposez.
Set of rings for a 0.30 dimension piston of a GM 5 liter engine with thick rings
5/64 x 5/64 x 3/16
Set of rings for a piston with a 0.75mm repair dimension on GM or Ford base engines.
Segment height: 2 - 2 - 4.8mm
Set of rings for a piston with a 1.5mm repair dimension on GM or Ford base engines.
Segment height: 2 - 2 - 4.8mm
Connecting rod screw and nut kit for the following Volvo Penta engines:
AD31, AD31B, AD31D-A, AD31L-A
AD31P-A, AD31XD, AD41A, AD41B
AD41D, AD41L-A, AD41P-A, AQAD30A
AQAD31A, AQAD40A, AQAD40B, AQAD41A
AQD40A, D41A, D41B, D41D
D41L-A, KAD300-A, KAD32P, KAD42A
KAD42B, KAD42P-A, KAD43P-A, KAD44P
KAD44P-B, KAD44P-C, KAMD300-A, KAMD42A
KAMD42B, KAMD42P-A, KAMD43P-A, KAMD44P-A
KAMD44P-C, MD30A, MD31A, MD40A
TAMD30A, TAMD31A, TAMD31B, TAMD31D
TAMD31L-A, TAMD31M-A, TAMD31P-A, TAMD31S-A
TAMD40A, TAMD40B, TAMD41A, TAMD41B
TAMD41D, TAMD41H-A, TAMD41H-B, TAMD41L-A
TAMD41M-A, TAMD41P-A, TAMD42B, TAMD42WJ-A
TD30A, TD31ACE, TD40A, TMD30A
TMD31A, TMD31B, TMD31D, TMD31L-A
TMD40A, TMD40B, TMD40C, TMD41A
TMD41B, TMD41D, TMD41L-A
Bearing set for a Yanmar engine connecting rod series:
1GM - 1GM10
2GM - 2GM20
3GM - 3GM30
Set of standard size segments with the following dimensions: 1.98 x 1.98 x 4.76MM.
Scraper segment depth: 4.80mm
Complete fixing kit including washers, nut and threaded rod for SP17 series engine mount.
Thread types M16-1.5 X M16-1.5, length 110mm.
Kit to be used in combination with SP171609 series engine mounts with a diameter of M16-1.5 on the lower side (shim) and M16-1.5 on the upper side (top engine).
Existing material in M20-1.5 higher and not M16-1.5 under reference SP181609-20.
Axle kit not suitable for type 22323 supports (fine pitch).
Set of bearings for a connecting rod in dimension 0.20.
Set of bearings for a connecting rod in dimension 0.30.
Set of segments in dimension 0.30 with the following dimensions: 1.98 x 1.98 x 4.76MM.
Scraper segment depth: 4.80mm
Jeu de segments en cote 0.30 de dimensions suivantes 1.98 x 1.98 x 4.76MM.
Profondeur du segments racleur : 3.20mm
Single motor mount with a 25.5mm diameter axle.
22.2mm mounts being discontinued.
Bearings for a STD connecting rod on a Volvo Penta 4 and 6 cylinder diesel engine.
Width: 29mm.
Story 270111 vs 876511:
In the 90s Volvo removed the reference 270111, recommending the use of the reference 11322 (876511).
For almost 30 years the use of the 11322 reference was the standard for the reconditioning of diesel blocks without any technical problems following the hundreds of reconditionings during this period.
For 5 years Volvo has reintroduced the reference 270111, offering again the possibility of obtaining this material without any viable technical reasons knowing that the use of the reference 11322 (876511) has become the standard during all these years.
Rocker arm rod for 4-cylinder and 6-cylinder in-line engines.
Length: 24.6 cm
Set of rings for a standard size piston with dimensions 2 x 2 x 4.76mm.
Push rod for GM V6 V8 engine with flat hydraulic lifters.
Length: 198mm
Diameter: 7.920
Set of rings for a standard size piston on GM or Ford base engines with a bore of 101.60mm.
Segment height: 2 - 2 - 4.8mm
2"-7/32 - 56.35mm diameter sand removal pellet.
Camshaft insert for GM 454 - 496 - 502 engine.
Set of rings for a piston measuring 0.30 with dimensions 2 x 2 x 4mm.
Jeu de segments pour un piston en cote 0.30 aux dimensions 2 x 1.5 x 4mm.