List of products by brand VETUS

Silicone wind sleeves, guaranteed to stand the test of time. Silicone is a highly flexible synthetic material with an operating temperature range of -100°C to +200°C.

It is UV resistant and will not fade, so it will always look like new.

The air sleeves are removable. The clamping rings and coupling bridge flanges are made of hard synthetic material. The internal color is red (RAL3020). A mosquito net and a stainless steel (AISI 316) cover plate for sealing can be supplied as an option.

Replaces the YOGI2 reference.

Technical characteristics:

A (in mm): 295.

B (in mm): 125.

C (in mm): 176.

D (in mm): 25.

Free passage area (in cm²): 122.8.

Available in 3 sizes with vertical opening and one with horizontal opening.

Silicone wind sleeves, guaranteed to stand the test of time. Silicone is a highly flexible synthetic material with an operating temperature range of -100°C to +200°C.

It is UV resistant and will not fade, so it will always look like new.

The air sleeves are removable. The clamping rings and coupling bridge flanges are made of hard synthetic material. The internal color is red (RAL3020). A mosquito net and a stainless steel (AISI 316) cover plate for sealing can be supplied as an option. It has a screwed synthetic flange that is easily removable.

Replaces the reference JERRYS.

Technical characteristics:

A (in mm): 192.

B (in mm): 75.

C (in mm): 127.

D (in mm): 11.

Free passage area (in cm²): 44.2.

Available in 3 sizes with vertical opening and one with horizontal opening.

Silicone wind sleeves, guaranteed to stand the test of time. Silicone is a highly flexible synthetic material with an operating temperature range of -100°C to +200°C.

It is UV resistant and will not fade, so it will always look like new.

The air sleeves are removable. The clamping rings and coupling bridge flanges are made of hard synthetic material. The internal color is red (RAL3020). A mosquito net and a stainless steel (AISI 316) cover plate for sealing can be supplied as an option.

Replaces reference JERRY2.

Technical characteristics:

A (in mm): 205.

B (in mm): 75.

C (in mm): 125.

D (in mm): 25.

Free passage area (in cm²): 44.2.

Available in 3 sizes with vertical opening and one with horizontal opening.

Silicone wind sleeves, guaranteed to stand the test of time. Silicone is a highly flexible synthetic material with an operating temperature range of -100°C to +200°C.

It is UV resistant and will not fade, so it will always look like new.

The air sleeves are removable. The clamping rings and coupling bridge flanges are made of hard synthetic material. The internal color is red (RAL3020). A mosquito net and a stainless steel (AISI 316) cover plate for sealing can be supplied as an option. It has a screwed synthetic flange that is easily removable.

Replaces reference TOM2.

Technical characteristics:

A (in mm): 230.

B (in mm): 100.

C (in mm): 152.

D (in mm): 11.

Free passage area (in cm²): 78.6.

Available in 3 sizes with vertical opening and one with horizontal opening.

Silicone wind sleeves, guaranteed to stand the test of time. Silicone is a highly flexible synthetic material with an operating temperature range of -100°C to +200°C.

It is UV resistant and will not fade, so it will always look like new.

The air sleeves are removable. The clamping rings and coupling bridge flanges are made of hard synthetic material. The internal color is red (RAL3020). A mosquito net and a stainless steel (AISI 316) cover plate for sealing can be supplied as an option.

Replaces reference TOM2.

Technical characteristics:

A (in mm): 244.

B (in mm): 100.

C (in mm): 152.

D (in mm): 25.

Free passage area (in cm²): 78.6.

Available in 3 sizes with vertical opening and one with horizontal opening.

This kit includes the stainless steel (AISI 316) shutter and mosquito net for all windsocks.

Set of shutters and mosquito nets for windsocks Ø 75 mm

This kit includes the stainless steel (AISI 316) shutter and mosquito net for all windsocks.

Set of shutters and mosquito nets for windsocks Ø 125 mm

This kit includes the stainless steel (AISI 316) shutter and mosquito net for all windsocks.

Set of shutters and mosquito nets for windsocks Ø 100 mm

Connection flange for VENT102.

Features :

A (in mm): 150.

B (in mm): 141.

C (in mm): 136.5.

D (in mm): 46.5.

E (in mm): 136.

Ø F: 109.7.

Ø G: 102.

Connection flange for VENT76A.

Features :

A (in mm): 120.

B (in mm): 115.

C (in mm): 106.5.

D (in mm): 46.5.

Ø F: 83.3.

Ø G: 76.

E (in mm): 106.

This exhaust fan is intended for the extraction of heat from the engine compartment when the engines are stopped or of gasoline vapors. Ignition protected, excluding hose, conforming to marine standard ISO 9097.

A mounting bracket is provided.

Technical characteristics:

Voltage (V): 24.

Pipe diameter in mm: 76.

Capacity (m³/minute): 4.

Free passage area (cm2): 76.

A (in mm): 186.

B (in mm): 168.

C (in mm): 88.

D (in mm): 157.

Made from high-temperature resistant Navidurin® composite, this fan is capable of extracting hot air and contaminants that affect the engine at a rate of 12.2 m3/minute. This extraction rate makes it one of the fastest systems in its range on the market, capable of operating at extremely high temperatures due to the unique composite properties.

It is also protected against ignition (IP67) and complies with the marine standard ISO 9097.

Caution: We do NOT recommend using exhaust fans to supply air to the main engines!

Technical characteristics:

Voltage (V): 24.

Pipe diameter in mm: 178.

Capacity (m³/minute): 12.2.

Made from high-temperature resistant Navidurin® composite, this fan is capable of extracting hot air and contaminants that affect the engine at a rate of 12.2 m3/minute. This extraction rate makes it one of the fastest systems in its range on the market, capable of operating at extremely high temperatures due to the unique composite properties.

It is also protected against ignition (IP67) and complies with the marine standard ISO 9097.

Caution: We do NOT recommend using exhaust fans to supply air to the main engines!

Technical characteristics:

Voltage (V): 12.

Pipe diameter in mm: 178.

Capacity (m³/minute): 12.2.

This exhaust fan is intended for the extraction of heat from the engine compartment when the engines are stopped or of gasoline vapors. Ignition protected, excluding hose, conforming to marine standard ISO 9097.

A mounting bracket is provided.

Technical characteristics:

Voltage (V): 24.

Pipe diameter in mm: 102.

Capacity (m³/minute): 8.

Free passage area (cm2): 102.

A (in mm): 215.

B (in mm): 237.

C (in mm): 113.

D (in mm): 209.

Ce ventilateur d'extraction est destiné à l'extraction de la chaleur du compartiment moteur lorsque les moteurs sont arrêtés ou des vapeurs d'essence. Protection contre l'allumage, hors flexible, conforme à la norme marine ISO 9097.

Un support de montage est fourni.

Caractéristiques techniques :

Tension (V) : 12.

Diamètre du tuyau en mm : 76.

Capacité (m³/minute) : 4.

Surface de passage libre (cm2) : 76.

A (en mm) : 186.

B (en mm) : 168.

C (en mm) : 88.

D (en mm) : 157.

This exhaust fan is intended for the extraction of heat from the engine compartment when the engines are stopped or of gasoline vapors. Ignition protected, excluding hose, conforming to marine standard ISO 9097.

A mounting bracket is provided.

Technical characteristics:

Voltage (V): 12.

Pipe diameter in mm: 102.

Capacity (m³/minute): 8.

Free passage area (cm2): 102.

A (in mm): 215.

B (in mm): 237.

C (in mm): 113.

D (in mm): 209.

The TWINLINE series is rated "ignition-proof," making it safe to use around a gasoline engine or in spaces where combustible gases may accumulate. These dangerous fumes can be safely extracted with TWINLINE fans, so you can start your engine with peace of mind.

This extractor fan is also ideal for simply extracting heat from your engine room, making it a valuable addition to diesel and electric powered boats. These powerful fans have a very compact housing, allowing installation in the most confined spaces.

Please note that they are not designed for continuous use and must be connected to the ship's power system.

Note: We do NOT recommend using exhaust fans to supply air to the motor(s)

principal(s).

Specifications:

• Complies with ISO 9097 Marine Standard

• The pipes can be connected to Scirocco (TWINLINE Ø 76 mm only) or Typhoon (TWINLINE Ø 76 mm and Ø 102 mm) aerators.

Technical characteristics:

A (in mm): 88.5.

B (in mm): 92.5.

C (in mm): 76.

D (in mm): 128.

Flow rate (m3/min): 5.

Inner sheath diameter (in mm): 76.

Power (in Volts): 24.

The TWINLINE series is rated "ignition-proof," making it safe to use around a gasoline engine or in spaces where combustible gases may accumulate. These dangerous fumes can be safely extracted with TWINLINE fans, so you can start your engine with peace of mind.

This extractor fan is also ideal for simply extracting heat from your engine room, making it a valuable addition to diesel and electric powered boats. These powerful fans have a very compact housing, allowing installation in the most confined spaces.

Please note that they are not designed for continuous use and must be connected to the ship's power system.

Note: We do NOT recommend using exhaust fans to supply air to the motor(s)

principal(s).

Specifications:

• Complies with ISO 9097 Marine Standard

• The pipes can be connected to Scirocco (TWINLINE Ø 76 mm only) or Typhoon (TWINLINE Ø 76 mm and Ø 102 mm) aerators.

Technical characteristics:

A (in mm): 116.

B (in mm): 119.

C (in mm): 101.6.

D (in mm): 180.

Flow rate (m3/min): 7.

Inner sheath diameter (in mm): 102.

Power (in Volts): 12.

The TWINLINE series is rated "ignition-proof," making it safe to use around a gasoline engine or in spaces where combustible gases may accumulate. These dangerous fumes can be safely extracted with TWINLINE fans, so you can start your engine with peace of mind.

This extractor fan is also ideal for simply extracting heat from your engine room, making it a valuable addition to diesel and electric powered boats. These powerful fans have a very compact housing, allowing installation in the most confined spaces.

Please note that they are not designed for continuous use and must be connected to the ship's power system.

Note: We do NOT recommend using exhaust fans to supply air to the motor(s)

principal(s).

Specifications:

• Complies with ISO 9097 Marine Standard

• The pipes can be connected to Scirocco (TWINLINE Ø 76 mm only) or Typhoon (TWINLINE Ø 76 mm and Ø 102 mm) aerators.

Technical characteristics:

A (in mm): 88.5.

B (in mm): 92.5.

C (in mm): 76.

D (in mm): 128.

Flow rate (m3/min): 5.

Inner sheath diameter (in mm): 76.

Power (in Volts): 12.

La série TWINLINE est classée « protégée contre l'allumage », ce qui permet de l'utiliser en toute sécurité lorsqu'un moteur à essence est installé ou dans des espaces où des gaz combustibles peuvent s'accumuler. Ces fumées dangereuses peuvent être extraites en toute sécurité avec les ventilateurs TWINLINE, vous pouvez donc démarrer votre moteur en toute tranquillité.

Cet extracteur est également parfaitement adaptée pour extraire simplement la chaleur de votre salle des machines, ce qui en fait un ajout précieux aux bateaux à moteur diesel et électrique. Ces ventilateurs puissants ont un boîtier très compact, permettant une installation dans les espaces les plus confinés.

Attention ils ne sont pas conçus pour une utilisation continue et doivent être reliés au système d'alimentation du navire.

Remarque: Nous ne recommande PAS d'utiliser des ventilateurs d'extraction pour fournir de l'air au(x) moteur(s)

principal(aux).

Spécifications :

• Conforme à la norme ISO 9097 Marine Standard

• Les tuyaux peuvent être raccordés à des aérateurs Scirocco (TWINLINE Ø 76 mm uniquement) ou Typhoon (TWINLINE Ø 76 mm et Ø 102 mm).

Caractéristiques techniques :

A (en mm) : 116.

B (en mm) : 119.

C (en mm) : 101.6.

D (en mm) : 180.

Débit (m3/min) : 7.

Diamètre gaine intérieur (en mm) : 102.

Puissance (en Volt) : 24.

Rotating portholes - SLR type

Perfect vision in all circumstances!

The centrifugal force caused by the rotating tempered glass, which reaches its maximum revolutions per minute in 25 seconds, instantly clears the screen of rain, snow and spray.

Even dirt and salt won't cause smears.

The SLR range is available in 2 sizes and meets all EMC requirements.

Characteristic :

Cut Ø A (in mm): 275.

Ø B (in mm): 250.

Ø C (in mm): 300.

Consumption (in V): 24.

Rotating portholes - SLR type

Perfect vision in all circumstances!

The centrifugal force caused by the rotating tempered glass, which reaches its maximum revolutions per minute in 25 seconds, instantly clears the screen of rain, snow and spray.

Even dirt and salt won't cause smears.

The SLR range is available in 2 sizes and meets all EMC requirements.

Characteristic :

Cut Ø A (in mm): 326.

Ø B (in mm): 300.

Ø C (in mm): 350.

Consumption (in V): 12.

Rotating portholes - SLR type

Perfect vision in all circumstances!

The centrifugal force caused by the rotating tempered glass, which reaches its maximum revolutions per minute in 25 seconds, instantly clears the screen of rain, snow and spray.

Even dirt and salt won't cause smears.

The SLR range is available in 2 sizes and meets all EMC requirements.

Characteristic :

Cut Ø A (in mm): 275.

Ø B (in mm): 250.

Ø C (in mm): 300.

Consumption (in V): 24.

Rotating portholes - SLR type

Perfect vision in all circumstances!

The centrifugal force caused by the rotating tempered glass, which reaches its maximum revolutions per minute in 25 seconds, instantly clears the screen of rain, snow and spray.

Even dirt and salt won't cause smears.

The SLR range is available in 2 sizes and meets all EMC requirements.

Characteristic :

Cut Ø A (in mm): 275.

Ø B (in mm): 250.

Ø C (in mm): 300.

Consumption (in V): 12.

Stainless steel portholes - Type PQ (AII)

VETUS offers a range of portholes made of stainless steel (AISI 316) in categories AI and AII.

They come with a stainless steel (AISI 316) inner frame, 8mm "smoked" acrylic glazing and a mosquito net on anodized aluminum frame.

These portholes are suitable for a structure thickness of 3 to 11mm and include a counter frame.

Screws for different wall thicknesses can be

ordered separately.

Features :

External dimensions (in mm): 210.

Cut-out dimensions (in mm): 176.

Replacement mosquito net: HORPQ53.