List of products by brand VETUS

Suitable for exhaust pipe with internal diameter of Ø 40 mm.

The gooseneck raises the exhaust line above the waterline and provides additional reduction of the

noise. The outlet fits directly onto all VETUS rubber exhaust outlets.

Features :

Water inlet pipe connection diameter (mm): 40.

Outlet pipe connection diameter (mm): 40.

Length (mm): 182.

Width (mm): 135.

Height (mm): 502.

Plastic gooseneck for marine exhaust systems with water injection. Supplied with stainless steel (AISI 316) mounting brackets.

Features :

Water inlet pipe connection diameter (mm): 90.

Outlet pipe connection diameter (mm): 90.

Length (mm): 210.

Width (mm): 300.

Height (mm): 525.

Airlock position: Horizontal.

Plastic gooseneck for marine exhaust systems with water injection. Supplied with stainless steel (AISI 316) mounting brackets.

Features :

Water inlet pipe connection diameter (mm): 90.

Outlet pipe connection diameter (mm): 110.

Length (mm): 210.

Width (mm): 300.

Height (mm): 525.

Airlock position: Horizontal.

Plastic gooseneck for marine exhaust systems with water injection. Supplied with stainless steel (AISI 316) mounting brackets.

Features :

Water inlet pipe connection diameter (mm): 75.

Outlet pipe connection diameter (mm): 75.

Length (mm): 155.

Width (mm): 235.

Height (mm): 500.

Airlock position: Horizontal.

Plastic gooseneck for marine exhaust systems with water injection. Supplied with stainless steel (AISI 316) mounting brackets.

Features :

Water inlet pipe connection diameter (mm): 65.

Outlet pipe connection diameter (mm): 75.

Length (mm): 155.

Width (mm): 235.

Height (mm): 500.

Airlock position: Horizontal.

Plastic gooseneck for marine exhaust systems with water injection. Supplied with stainless steel (AISI 316) mounting brackets.

Features :

Water inlet pipe connection diameter (mm): 65.

Outlet pipe connection diameter (mm): 65.

Length (mm): 155.

Width (mm): 235.

Height (mm): 500.

Airlock position: Horizontal.

Plastic gooseneck for marine exhaust systems with water injection. Supplied with stainless steel (AISI 316) mounting brackets.

Features :

Water inlet pipe connection diameter (mm): 152.

Outlet pipe connection diameter (mm): 152.

Length (mm): 275.

Width (mm): 380.

Height (mm): 565.

Airlock position: Vertical.

% Noise Reduction: 15.

Plastic gooseneck for marine exhaust systems with water injection. Supplied with stainless steel (AISI 316) mounting brackets.

Features :

Water inlet pipe connection diameter (mm): 127.

Outlet pipe connection diameter (mm): 127.

Length (mm): 275.

Width (mm): 380.

Height (mm): 565.

Airlock position: Vertical.

% Noise Reduction: 15.

Plastic gooseneck for marine exhaust systems with water injection. Supplied with stainless steel (AISI 316) mounting brackets.

Features :

Water inlet pipe connection diameter (mm): 110.

Outlet pipe connection diameter (mm): 110.

Length (mm): 210.

Width (mm): 300.

Height (mm): 525.

Airlock position: Horizontal.

Plastic gooseneck for marine exhaust systems with water injection. Supplied with stainless steel (AISI 316) mounting brackets.

Features :

Water inlet pipe connection diameter (mm): 102.

Outlet pipe connection diameter (mm): 102.

Length (mm): 210.

Width (mm): 300.

Height (mm): 525.

Airlock position: Vertical.

% Noise Reduction: 15.

Replacement kit (set of 5) of valve for ASDV model.

Valve de remplacement pour la gamme AIRVENTV.

Anti-siphon elbow with valve and hose. With 4m of 8 x 14mm ventilation hose, suitable for 38mm pipes. Ideal for toilets or holding tanks installed below the waterline.

Interchangeable with AIRVENT type thanks to the same fixing hole centers.

The air bleed fitting rotates 360°. (Includes 2m hose and skin fittings)

A 38 mm diameter flexible hose can be connected directly to the elbow connections. Mount each hose connection with a stainless steel clamp.

Size :

Length (mm): 129.

Width (mm): 48.

Height (mm): 107.

Pipe connection diameter (mm): 38.

Coude anti-siphon sans clapet et avec tuyau de ventilation, raccordement 13 - 32 mm.

Peut être utilisé comme système d'évacuation ou toilettes.

Interchangeables avec le type AIRVENT et ont les mêmes entraxes de fixation

Livré complet avec raccord, colliers de serrage et 2 m de tuyau. Les coudes anti-siphon sans clapet doivent impérativement être dotés d'un tuyau de ventilation.

Le raccord de purge d'air pivote à 360°. (Comprend un tuyau de 2 m et des raccords de peau). De plus, la vanne peut être entretenue sans démonter la purge du mur et aucun outil n'est nécessaire pour cela. Pour le remplacement, un jeu de 5 vannes est disponible comme pièce de rechange.

Un tuyau souple de 13 mm de diamètre peut être directement relié aux raccordements du coude

Peut être connecté à des tuyaux de diamètres intérieurs de 13, 19, 25 et 32 ??mm.

Taille :

Largeur (mm) : 68.

Longueur (mm) : 96.

Hauteur (mm) : 133.

Anti-siphon elbow without valve and with hose. With 4m of 8 x 14mm ventilation hose, suitable for 38mm pipes. Ideal for toilets or holding tanks installed below the waterline.

The air bleed fitting rotates 360°. (Includes 2m hose and skin fittings)

A 38 mm diameter flexible hose can be connected directly to the elbow connections. Mount each hose connection with a stainless steel clamp.

Size :

Length (mm): 129.

Height (mm): 107.

Pipe connection diameter (mm): 38.

Exhaust temperature alarm probe, two probes available for VETUS mounting.

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection.

Use the XHSH type sensor for mounting in the exhaust pipe

Note: Temperature sensors and alarm unit must be ordered separately. In the case of a

twin-engine installation, 2 sensors can be connected to one alarm unit.

Exhaust temperature alarm probe, two probes available for VETUS mounting.

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection.

Use the XHSH type sensor for mounting in the exhaust pipe

Note: Temperature sensors and alarm unit must be ordered separately. In the case of a

twin-engine installation, 2 sensors can be connected to one alarm unit.

Indicator for VETUS exhaust temperature alarm, to be mounted with the XHSM or XHSH probes.

Dimension Ø 52 mm, total diameter 62 mm.

Mounting depth 40 mm.

Suitable for 24 Volt DC

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection

Use the XHSH type sensor for mounting in the exhaust pipe

Indicator for VETUS exhaust temperature alarm, to be mounted with the XHSM or XHSH probes.

Dimension Ø 52 mm, total diameter 62 mm.

Mounting depth 40 mm.

Suitable for 24 Volt DC

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection

Use the XHSH type sensor for mounting in the exhaust pipe

Indicator for VETUS exhaust temperature alarm, to be mounted with the XHSM or XHSH probes.

Dimension Ø 52 mm, total diameter 62 mm.

Mounting depth 40 mm.

Suitable for 12 Volt DC

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection

Use the XHSH type sensor for mounting in the exhaust pipe

Indicator for VETUS exhaust temperature alarm, to be mounted with the XHSM or XHSH probes.

Dimension Ø 52 mm, total diameter 62 mm.

Mounting depth 40 mm.

Suitable for 12 Volt DC

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection

Use the XHSH type sensor for mounting in the exhaust pipe

The VETUS gas/water separator has a dual function. It separates the injected raw cooling water from the exhaust gases and also functions as a gooseneck. Particularly important for generator sets, the separator reduces exhaust noise and discharges the cooling water below the waterline, thus avoiding the characteristic splashing noise.

With a 20 litre capacity and a 75mm connection, this separator is suitable for engines up to 125hp.

The splitter's compact design ensures it will fit most boats.

Features :

Rotating pipe fittings for easy installation

75mm cooling water drain

Comes with a stainless steel (AISI 316) mounting bracket with synthetic straps

The VETUS gas/water separator has a dual function. It separates the injected raw cooling water from the exhaust gases and also functions as a gooseneck. Particularly important for generator sets, the separator reduces exhaust noise and discharges the cooling water below the waterline, thus avoiding the characteristic splashing noise.

Features :

360º rotating pipe fittings for 75mm internal pipe diameters

50mm cooling water drain

Comes with a stainless steel (AISI 316) mounting bracket with synthetic straps

The VETUS gas/water separator has a dual function. It separates the injected raw cooling water from the exhaust gases and also functions as a gooseneck. Particularly important for generator sets, the separator reduces exhaust noise and discharges the cooling water below the waterline, thus avoiding the characteristic splashing noise.

Features :

360º rotating pipe fittings for 50mm internal pipe diameters

50mm cooling water drain

Comes with a stainless steel (AISI 316) mounting bracket with synthetic straps

The VETUS gas/water separator has a dual function. It separates the injected raw cooling water from the exhaust gases and also functions as a gooseneck. Particularly important for generator sets, the separator reduces exhaust noise and discharges the cooling water below the waterline, thus avoiding the characteristic splashing noise.

Features :

360º rotating pipe fittings for 50mm internal pipe diameters

38mm cooling water drain

Comes with a stainless steel (AISI 316) mounting bracket with synthetic straps