List of products by brand VETUS

Keeping water fresh and preventing bacteria growth can be tricky, but a wide opening will help get the job done.

Periodic cleaning of all connections and of course the tank itself will be a much easier job if it can be done in a minimum of time.

Supplied with:

Fresh water filling connection Ø 38 mm.

Fresh water suction connection Ø 13 mm.

Ventilation connection Ø 16.

5-hole SAE flange tank level sensor connection.

Features :

Cutting diameter (mm): 159.

Diameter (mm): 120.

90 degree elbow filling connection Ø 38 mm for ILTCOND drinking water connection kit.

To make opening and closing ILT lids easy and hassle-free, a well-designed key to facilitate the movement of stubborn lids.

Jauge de réservoir pour eau potable, essence et gasoil. Indique la différence de niveau de liquide tous les 2,5 cm pour une précision maximale.

Chaque longueur de tube contient le nombre maximal de contacts à lames (commutateurs électroniques),

au lieu du minimum absolu de trois (plein, à moitié plein, vide). Pour cette raison, vos jauges de réservoir

pourront fournir une précision maximale. Les contacts sont scellés et "étanches aux liquides".

Caractéristiques techniques :

• Vide 300 ?

• Plein 10 ?

• Pour 12 et 24 volt

Caractéristiques :

Tension (V) : 12/24.

Longueur (mm) : 320.

Innovative inspection hatch with a robust design. The ILT is an innovative inspection hatch that makes it easy to open, inspect, and clean the tank, even after it has been closed for a long time.

The inspection port has a counter flange and silicone rubber that are inserted into a Ø 159 mm hole in the tank. Suitable for tanks with a wall thickness of 0.8 to 4 mm.

Simply tighten the five supplied bolts that compress the silicone rubber to ensure a perfect seal.

The "insert-clamp" design simplifies installation, making drilling a Ø 159 hole the hardest part of the installation. The black blind plate can be replaced with various connection kits.

Jauge de réservoir pour eau potable, essence et gasoil. Indique la différence de niveau de liquide tous les 2,5 cm pour une précision maximale.

Chaque longueur de tube contient le nombre maximal de contacts à lames (commutateurs électroniques),

au lieu du minimum absolu de trois (plein, à moitié plein, vide). Pour cette raison, vos jauges de réservoir

pourront fournir une précision maximale. Les contacts sont scellés et "étanches aux liquides".

Caractéristiques techniques :

• Vide 300 ?

• Plein 10 ?

• Pour 12 et 24 volt

Caractéristiques :

Tension (V) : 12/24.

Longueur (mm) : 280.

Innovative inspection hatch with a robust design. The ILT is an innovative inspection hatch that makes it easy to open, inspect, and clean the tank, even after it has been closed for a long time.

The inspection port has a counter flange and silicone rubber that are inserted into a Ø 159 mm hole in the tank. Suitable for tanks with a wall thickness of 4 to 10 mm.

Simply tighten the five supplied bolts that compress the silicone rubber to ensure a perfect seal.

The "insert-clamp" design simplifies installation, making drilling a Ø 159 hole the hardest part of the installation. The black blind plate can be replaced with various connection kits.

Standard double coil water heater type WHT in stainless steel and insulated with 50mm thick polyester foam.

This range of dual-coil water heaters will double your onboard hot water comfort. One heating coil can be connected to the engine's cooling circuit to utilize excess engine heat. The other coil can be connected to an integrated heating system.

All water heaters are supplied with: a 1500 watt electric heating element, 6 x 16mm pipe connectors and a 6 bar pressure limiter / non-return valve.

Features :

Fresh water capacity (liter): 100.

Coolant capacity (liter): 0.5.

Engine coolant connection: G 1/2.

Fresh water connection: G 1/2.

Heating element connection: G 1 1/4.

Fresh water relief valve setting: 6 bar (87 psi).

Standard double coil water heater type WHT in stainless steel and insulated with 50mm thick polyester foam.

This range of dual-coil water heaters will double your onboard hot water comfort. One heating coil can be connected to the engine's cooling circuit to utilize excess engine heat. The other coil can be connected to an integrated heating system.

All water heaters are supplied with: a 1500 watt electric heating element, 6 x 16mm pipe connectors and a 6 bar pressure limiter / non-return valve.

Features :

Fresh water capacity (liter): 75.

Coolant capacity (liter): 0.5.

Engine coolant connection: G 1/2.

Fresh water connection: G 1/2.

Heating element connection: G 1 1/4.

Fresh water relief valve setting: 6 bar (87 psi).

Standard double coil water heater type WHT in stainless steel and insulated with 50mm thick polyester foam.

This range of dual-coil water heaters will double your onboard hot water comfort. One heating coil can be connected to the engine's cooling circuit to utilize excess engine heat. The other coil can be connected to an integrated heating system.

All water heaters are supplied with: a 1500 watt electric heating element, 6 x 16mm pipe connectors and a 6 bar pressure limiter / non-return valve.

Features :

Fresh water capacity (liter): 50.

Coolant capacity (liter): 0.5.

Engine coolant connection: G 1/2.

Fresh water connection: G 1/2.

Heating element connection: G 1 1/4.

Fresh water relief valve setting: 6 bar (87 psi).

Standard double coil water heater type WHT in stainless steel and insulated with 50mm thick polyester foam.

This range of dual-coil water heaters will double your onboard hot water comfort. One heating coil can be connected to the engine's cooling circuit to utilize excess engine heat. The other coil can be connected to an integrated heating system.

All water heaters are supplied with: a 1500 watt electric heating element, 6 x 16mm pipe connectors and a 6 bar pressure limiter / non-return valve.

Features :

Fresh water capacity (liter): 25.

Coolant capacity (liter): 0.5.

Engine coolant connection: G 1/2.

Fresh water connection: G 1/2.

Heating element connection: G 1 1/4.

Fresh water relief valve setting: 6 bar (87 psi).

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 75.

Coolant capacity (liter): 9.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 55.

Coolant capacity (liter): 7.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 45.

Coolant capacity (liter): 5.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 31.

Coolant capacity (liter): 3.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 20.

Coolant capacity (liter): 2.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

2-piece lashing straps 3m x 25mm with VETUS logo.

Made of high-quality polyethylene, this large-capacity tank can handle all the liquids you need to store on your boat. It features an inspection hatch and can accommodate the ILT concept. For easy opening, there's a flange in the cap. At the bottom, there's a 38mm connection that can be drilled for interconnection or drainage.

Thanks to the large inspection hole (140 mm), the tank complies with ISO 2148. Depending on the type of use you have for this tank, a suitable connection kit is available. The tank is easy to install and has enough capacity for long cruises.

Features :

Width (mm): 390.

Capacity (liters): 100.

Length (mm): 1010.

Height (mm): 315.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 390.

Length (mm): 1400.

Width (mm): 400.

Height (mm): 800.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 335.

Length (mm): 1700.

Width (mm): 700.

Height (mm): 350.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 215.

Length (mm): 1000.

Width (mm): 400.

Height (mm): 600.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 170.

Length (mm): 110.

Width (mm): 440.

Height (mm): 400.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 137.

Length (mm): 1200.

Width (mm): 400.

Height (mm): 330.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 110.

Length (mm): 1200.

Width (mm): 350.

Height (mm): 290.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 88.

Length (mm): 800.

Width (mm): 400.

Height (mm): 330.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 61.

Length (mm): 660.

Width (mm): 350.

Height (mm): 290.

Color: Translucent light blue.