List of products by brand VETUS

Système anti débordement splash-stop

Le splash-stop est connecté directement sous le nable de remplissage (1) pour s'assurer que le trop plein de carburant ou de mousse ne peut pas inonder le pont, le salir ou polluer l'eau.

Pour installation hors du compartiment moteur.

Type FS

Il dispose d'un réservoir d'une capacité d'environ 2 L.

Le trop plein de carburant retourne dans le réservoir par le raccordement (2).

Cette connexion sert de mise à l'aire libre du réservoir. La conduite de reniflard à l'extérieur doit être installée comme indiqué (3). Le splash-stop est fourni avec des raccords pour tuyau de remplissage en diamètre 51 mm.

Modèle FS5125

Dimensions : L x W x H (mm) : Largeur : 250 x Profondeur : 120 x Hauteur : 215 mm

Tuyau diamètre : 51 mm

Event : 25 mm

Nable de pont diamètre : 51 mm

Accouplements flexibles

Montage 100% Concentrique

Cet accouplement flexible a un moyeu de serrage conique spécial et convient aux entraînements en V.

Caractéristiques techniques :

- DIN 6270 B CV/100 t/mn sur l'arbre Kw (CV) : 2.6 (3.6)

- Exemple: à 1500 t/mn sur l'arbre la puissance maxi admissible est: (DIN B) : 15 x 2.4 = 39 kW (53 hp)

- DIN 6270 A CV/100 t.p.m sur l'arbre kW (CV) : 1.8 (2.5)

- Diamètre D : 130 mm

- Diamètre L : 98 mm

- Diamètre d : 30 mm

- Poids : 2.4 kg

Special waterlocks for large boats type MG.

Excellent noise reduction, minimal back pressure.

This type of water lock is designed for modern, high-performance boats with one or two large engines that have little space to spare in the engine room. The outlet connection on top can rotate 360°, and the inlet connection is angled upwards by 45°. The MG type can only be installed in water-injected exhaust systems. Its body is made entirely of synthetic materials, therefore not susceptible to corrosion or galvanic action.

Features :

• Excellent sound reduction

• Minimal back pressure

• Drain plug for winter storage

• Suitable for internal pipe diameters Ø 102 mm

• Capacities of 23 liters

• Supplied with AISI 316 stainless steel clamping bands

• M12 thread purge

• Optional temperature sensor

Technical characteristics:

• Capacity: 23 L

• Diameter d: 102 mm

• Diameter D: 102 mm

• Diameter A: 270 mm

• Diameter B: 450 mm

Kit of 5 propeller pins for Vetus type BOW80 bow thruster.

Dimensions 3 X 23.33mm.

RW type windshield wiper motor

These high-quality marine wipers feature a powerful yet quiet two-speed motor and worm gear transmission. The wiping angle can be adjusted to eight different settings. The RW type has a knurled parallel connection.

Features :

- Available for 12 or 24 volt DC power supply

- Consumption 30 Watts

- Suitable for panel thicknesses from 3 to 13 mm (short shaft) or from 3 to 38 mm (long shaft)

- Type RW with knurled parallel shaft in stainless steel, diameter 13.5 mm, 72 teeth

- Optional: Screen washer kit, 3-position switch

- Protective synthetic cover, control panel

Description :

12 VDC wiper motor, 51 mm shaft and parallel connection

RWA type wiper arm

This wiper arm is made of shiny stainless steel and black components of high-quality synthetic materials.

Technical characteristics:

- Bayonet: 7.2 x 2.5 mm

- Arm: Single black arm

- Length: 280 - 366 mm

- Engine: RW

Repair kit for Vetus ZBW30A cable gland diameter 30mm.

Kit including:

- 3-screw flange for oil seal holder

- Oil seal x2

- Clamping screw

- Silicone grease

- O-ring

Gasket kit for Vetus engines:

- M2.C5

- M2.D5

Anti-siphon elbow without valve and with hose. With 4m of 8 x 14mm ventilation hose, suitable for 38mm pipes. Ideal for toilets or holding tanks installed below the waterline.

The air bleed fitting rotates 360°. (Includes 2m hose and skin fittings)

A 38 mm diameter flexible hose can be connected directly to the elbow connections. Mount each hose connection with a stainless steel clamp.

Size :

Length (mm): 129.

Height (mm): 107.

Pipe connection diameter (mm): 38.

Anti-siphon elbow with valve and hose. With 4m of 8 x 14mm ventilation hose, suitable for 38mm pipes. Ideal for toilets or holding tanks installed below the waterline.

Interchangeable with AIRVENT type thanks to the same fixing hole centers.

The air bleed fitting rotates 360°. (Includes 2m hose and skin fittings)

A 38 mm diameter flexible hose can be connected directly to the elbow connections. Mount each hose connection with a stainless steel clamp.

Size :

Length (mm): 129.

Width (mm): 48.

Height (mm): 107.

Pipe connection diameter (mm): 38.

Anti-siphon elbow without valve and with ventilation pipe, connection 13 - 32 mm.

Can be used as a drainage system or toilet.

Interchangeable with the AIRVENT type and have the same fixing center distances

Comes complete with fitting, hose clamps and 2m of hose. Non-valve anti-siphon elbows must be fitted with a ventilation pipe.

The air vent fitting rotates 360°. (Includes a 2 m hose and skin fittings). In addition, the valve can be serviced without removing the vent from the wall and no tools are required for this. For replacement, a set of 5 valves is available as a spare part.

A 13 mm diameter flexible hose can be directly connected to the elbow connections

Can be connected to pipes with inner diameters of 13, 19, 25 and 32 mm.

Size :

Width (mm): 68.

Length (mm): 96.

Height (mm): 133.

Replacement kit (set of 5) of valve for ASDV model.

Replacement valve for the AIRVENTV range.

Plastic silencer type MP100, for 102 mm exhaust pipe.

The design of this muffler creates an additional mixture of water inside the exhaust line, resulting in an even greater noise reduction equivalent to 30%.

Features :

Water inlet pipe connection diameter (mm): 102.

Outlet pipe connection diameter (mm): 102.

Length (mm): 580.

Width (mm): 168.

Height (mm): 202.

Airlock position: Horizontal.

Very resistant: No.

Rotating pipe fittings: No.

Rotating body parts: No.

% Noise Reduction: 30.

The construction of the silencer causes virtually no resistance to the free flow of exhaust gases.

It creates additional mixing of the water inside the exhaust line which results in even better noise reduction.

Features :

Water inlet pipe connection diameter (mm): 40.

Outlet pipe connection diameter (mm): 40.

Length (mm): 368.

Width (mm): 108.

Height (mm): 158.

Airlock position: Horizontal.

% Noise reduction: 30.

The construction of the silencer causes virtually no resistance to the free flow of exhaust gases.

It creates additional mixing of the water inside the exhaust line which results in even better noise reduction.

Features :

Water inlet pipe connection diameter (mm): 45.

Outlet pipe connection diameter (mm): 45.

Length (mm): 368.

Width (mm): 108.

Height (mm): 158.

Airlock position: Horizontal.

% Noise Reduction: 30.

The construction of the silencer causes virtually no resistance to the free flow of exhaust gases.

It creates additional mixing of the water inside the exhaust line which results in even better noise reduction.

Features :

Water inlet pipe connection diameter (mm): 50.

Outlet pipe connection diameter (mm): 50.

Length (mm): 368.

Width (mm): 108.

Height (mm): 158.

Airlock position: Horizontal.

% Noise Reduction: 30.

The construction of the silencer causes virtually no resistance to the free flow of exhaust gases.

It creates additional mixing of the water inside the exhaust line which results in even better noise reduction.

Features :

Water inlet pipe connection diameter (mm): 60.

Outlet pipe connection diameter (mm): 60.

Length (mm): 368.

Width (mm): 108.

Height (mm): 158.

Airlock position: Horizontal.

% Noise Reduction: 30.

The construction of the silencer causes virtually no resistance to the free flow of exhaust gases.

It creates additional mixing of the water inside the exhaust line which results in even better noise reduction.

Features :

Water inlet pipe connection diameter (mm): 75.

Outlet pipe connection diameter (mm): 75.

Length (mm): 368.

Width (mm): 108.

Height (mm): 158.

Airlock position: Horizontal.

% Noise Reduction: 30.

The construction of the silencer causes virtually no resistance to the free flow of exhaust gases.

It creates additional mixing of the water inside the exhaust line which results in even better noise reduction.

Features :

Water inlet pipe connection diameter (mm): 90.

Outlet pipe connection diameter (mm): 90.

Length (mm): 456.

Width (mm): 130.

Height (mm): 180.

Airlock position: Horizontal.

% Noise Reduction: 30.

Manufactured from the specially blended NAVIDURIN® composite, heat-resistant up to 260°C. The same applies to thermal resistance to deformation under pressure. The HPW series is ideal for applications where the system is put to the test, such as commercial vessels or coast guards. This ability to handle extreme conditions, combined with the rotating bodies and pipe fittings, makes the HPW series a cost-effective alternative to expensive, high-end custom solutions.

It has a 360º rotating body and allows for infinite connection of hose fittings. It comes with floor mounting brackets. Large capacity water lifter provides complete safety for your engine. Excellent noise attenuation with minimal back pressure.

Features :

Capacity (liters): 55.

Water inlet pipe connection diameter (mm): 102.

Outlet pipe connection diameter (mm): 102.

Length (mm): 950.

Width (mm): 440.

Height (mm): 648.

Airlock position: Vertical.

% Noise Reduction: 30.

Manufactured from the specially blended NAVIDURIN® composite, heat-resistant up to 260°C. The same applies to thermal resistance to deformation under pressure. The HPW series is ideal for applications where the system is put to the test, such as commercial vessels or coast guards. This ability to handle extreme conditions, combined with the rotating bodies and pipe fittings, makes the HPW series a cost-effective alternative to expensive, high-end custom solutions.

It has a 360º rotating body and allows for infinite connection of hose fittings. It comes with floor mounting brackets. Large capacity water lifter provides complete safety for your engine. Excellent noise attenuation with minimal back pressure.

Features :

Capacity (liters): 55.

Water inlet pipe connection diameter (mm): 127.

Outlet pipe connection diameter (mm): 127.

Length (mm): 950.

Width (mm): 440.

Height (mm): 648.

Airlock position: Vertical.

% Noise Reduction: 30.

Manufactured from the specially blended NAVIDURIN® composite, heat-resistant up to 260°C. The same applies to thermal resistance to deformation under pressure. The HPW series is ideal for applications where the system is put to the test, such as commercial vessels or coast guards. This ability to handle extreme conditions, combined with the rotating bodies and pipe fittings, makes the HPW series a cost-effective alternative to expensive, high-end custom solutions.

It has a 360º rotating body and allows for infinite connection of hose fittings. It comes with floor mounting brackets. Large capacity water lifter provides complete safety for your engine. Excellent noise attenuation with minimal back pressure.

Features :

Capacity (liters): 55.

Water inlet pipe connection diameter (mm): 127.

Outlet pipe connection diameter (mm): 152.

Length (mm): 950.

Width (mm): 440.

Height (mm): 648.

Airlock position: Vertical.

% Noise Reduction: 30.

Manufactured from the specially blended NAVIDURIN® composite, heat-resistant up to 260°C. The same applies to thermal resistance to deformation under pressure. The HPW series is ideal for applications where the system is put to the test, such as commercial vessels or coast guards. This ability to handle extreme conditions, combined with the rotating bodies and pipe fittings, makes the HPW series a cost-effective alternative to expensive, high-end custom solutions.

It has a 360º rotating body and allows for infinite connection of hose fittings. It comes with floor mounting brackets. Large capacity water lifter provides complete safety for your engine. Excellent noise attenuation with minimal back pressure.

Features :

Capacity (liters): 55.

Water inlet pipe connection diameter (mm): 152.

Outlet pipe connection diameter (mm): 152.

Length (mm): 950.

Width (mm): 440.

Height (mm): 648.

Airlock position: Vertical.

% Noise Reduction: 30.