Vetus marine parts - Page 85

Innovative inspection hatch with a robust design. The ILT is an innovative inspection hatch that makes it easy to open, inspect, and clean the tank, even after it has been closed for a long time.

The inspection port has a counter flange and silicone rubber that are inserted into a Ø 159 mm hole in the tank. Suitable for tanks with a wall thickness of 0.8 to 4 mm.

Simply tighten the five supplied bolts that compress the silicone rubber to ensure a perfect seal.

The "insert-clamp" design simplifies installation, making drilling a Ø 159 hole the hardest part of the installation. The black blind plate can be replaced with various connection kits.

Tank gauge for drinking water, gasoline, and diesel. Indicates the difference in liquid level every 2.5 cm for maximum accuracy.

Each length of tube contains the maximum number of reed contacts (electronic switches),

instead of the absolute minimum of three (full, half full, empty). For this reason, your tank gauges

will be able to provide maximum accuracy. The contacts are sealed and "liquid-tight".

Technical characteristics:

• Empty 300?

• Full 10?

• For 12 and 24 volts

Features :

Voltage (V): 12/24.

Length (mm): 280.

Innovative inspection hatch with a robust design. The ILT is an innovative inspection hatch that makes it easy to open, inspect, and clean the tank, even after it has been closed for a long time.

The inspection port has a counter flange and silicone rubber that are inserted into a Ø 159 mm hole in the tank. Suitable for tanks with a wall thickness of 4 to 10 mm.

Simply tighten the five supplied bolts that compress the silicone rubber to ensure a perfect seal.

The "insert-clamp" design simplifies installation, making drilling a Ø 159 hole the hardest part of the installation. The black blind plate can be replaced with various connection kits.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 24.

Capacity (Ipm): 20.

Pressure (bar): 4.2.

Amperage (A): 10.

L x W x H (mm): 229 x 147 x 132.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 24.

Capacity (Ipm): 13.2.

Pressure (bar): 3.1.

Amperage (A): 4.

L x W x H (mm): 212 x 130 x 123.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 24.

Capacity (Ipm): 7.6.

Pressure (bar): 2.1.

Amperage (A): 3.

L x W x H (mm): 212 x 130 x 123.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 12.

Capacity (Ipm): 20.

Pressure (bar): 4.2.

Amperage (A): 17.

L x W x H (mm): 229 x 147 x 132.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 12.

Capacity (Ipm): 13.2.

Pressure (bar): 3.1.

Amperage (A): 7.

L x W x H (mm): 212 x 130 x 123.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 12.

Capacity (Ipm): 7.6.

Pressure (bar): 2.1.

Amperage (A): 5.

L x W x H (mm): 212 x 130 x 123.

Made of high-quality polyamide, this compact, small-capacity accumulator with a rubber diaphragm ensures a constant flow rate in the container's water circuit. The pressure in the accumulator prevents the water pump motor from starting every time a water supply is required, and the butyl rubber diaphragm is suitable for drinking water. Connection is easy as there is no preferred IN or OUT connection on this accumulator.

It ensures a constant water flow, saves energy and minimizes noise. The accumulator is set to a precharge pressure of 0.7 bar, but can be adjusted to optimal settings for your freshwater system (up to a maximum of 8.5 bar).

The overall dimensions are 223mm x 194mm x 114mm and the accumulator is supplied with two angled and two straight 13mm pipe stands.

Features :

Temperature range: 0 to 50 degrees Celsius.

Width (mm): 194.

Height (mm): 114.

Length (mm): 223.

Capacity (liters): 0.75.

Weight (kg): 0.36.

Pipe connection diameter (mm): 13.

Max. pressure (bar): 8.5.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 390.

Length (mm): 1400.

Width (mm): 400.

Height (mm): 800.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 335.

Length (mm): 1700.

Width (mm): 700.

Height (mm): 350.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 215.

Length (mm): 1000.

Width (mm): 400.

Height (mm): 600.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 170.

Length (mm): 110.

Width (mm): 440.

Height (mm): 400.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 137.

Length (mm): 1200.

Width (mm): 400.

Height (mm): 330.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 110.

Length (mm): 1200.

Width (mm): 350.

Height (mm): 290.

Color: Translucent light blue.