Vetus marine parts - Page 11

This exhaust fan is intended for the extraction of heat from the engine compartment when the engines are stopped or of gasoline vapors. Ignition protected, excluding hose, conforming to marine standard ISO 9097.

A mounting bracket is provided.

Technical characteristics:

Voltage (V): 12.

Pipe diameter in mm: 102.

Capacity (m³/minute): 8.

Free passage area (cm2): 102.

A (in mm): 215.

B (in mm): 237.

C (in mm): 113.

D (in mm): 209.

The TWINLINE series is rated "ignition-proof," making it safe to use around a gasoline engine or in spaces where combustible gases may accumulate. These dangerous fumes can be safely extracted with TWINLINE fans, so you can start your engine with peace of mind.

This extractor fan is also ideal for simply extracting heat from your engine room, making it a valuable addition to diesel and electric powered boats. These powerful fans have a very compact housing, allowing installation in the most confined spaces.

Please note that they are not designed for continuous use and must be connected to the ship's power system.

Note: We do NOT recommend using exhaust fans to supply air to the motor(s)

principal(s).

Specifications:

• Complies with ISO 9097 Marine Standard

• The pipes can be connected to Scirocco (TWINLINE Ø 76 mm only) or Typhoon (TWINLINE Ø 76 mm and Ø 102 mm) aerators.

Technical characteristics:

A (in mm): 88.5.

B (in mm): 92.5.

C (in mm): 76.

D (in mm): 128.

Flow rate (m3/min): 5.

Inner sheath diameter (in mm): 76.

Power (in Volts): 24.

The TWINLINE series is rated "ignition-proof," making it safe to use around a gasoline engine or in spaces where combustible gases may accumulate. These dangerous fumes can be safely extracted with TWINLINE fans, so you can start your engine with peace of mind.

This extractor fan is also ideal for simply extracting heat from your engine room, making it a valuable addition to diesel and electric powered boats. These powerful fans have a very compact housing, allowing installation in the most confined spaces.

Please note that they are not designed for continuous use and must be connected to the ship's power system.

Note: We do NOT recommend using exhaust fans to supply air to the motor(s)

principal(s).

Specifications:

• Complies with ISO 9097 Marine Standard

• The pipes can be connected to Scirocco (TWINLINE Ø 76 mm only) or Typhoon (TWINLINE Ø 76 mm and Ø 102 mm) aerators.

Technical characteristics:

A (in mm): 116.

B (in mm): 119.

C (in mm): 101.6.

D (in mm): 180.

Flow rate (m3/min): 7.

Inner sheath diameter (in mm): 102.

Power (in Volts): 12.

The TWINLINE series is rated "ignition-proof," making it safe to use around a gasoline engine or in spaces where combustible gases may accumulate. These dangerous fumes can be safely extracted with TWINLINE fans, so you can start your engine with peace of mind.

This extractor fan is also ideal for simply extracting heat from your engine room, making it a valuable addition to diesel and electric powered boats. These powerful fans have a very compact housing, allowing installation in the most confined spaces.

Please note that they are not designed for continuous use and must be connected to the ship's power system.

Note: We do NOT recommend using exhaust fans to supply air to the motor(s)

principal(s).

Specifications:

• Complies with ISO 9097 Marine Standard

• The pipes can be connected to Scirocco (TWINLINE Ø 76 mm only) or Typhoon (TWINLINE Ø 76 mm and Ø 102 mm) aerators.

Technical characteristics:

A (in mm): 88.5.

B (in mm): 92.5.

C (in mm): 76.

D (in mm): 128.

Flow rate (m3/min): 5.

Inner sheath diameter (in mm): 76.

Power (in Volts): 12.

The TWINLINE series is rated "ignition-proof," making it safe to use around a gasoline engine or in spaces where combustible gases may accumulate. These dangerous fumes can be safely extracted with TWINLINE fans, so you can start your engine with peace of mind.

This extractor fan is also ideal for simply extracting heat from your engine room, making it a valuable addition to diesel and electric powered boats. These powerful fans have a very compact housing, allowing installation in the most confined spaces.

Please note that they are not designed for continuous use and must be connected to the ship's power system.

Note: We do NOT recommend using exhaust fans to supply air to the motor(s)

principal(s).

Specifications:

• Complies with ISO 9097 Marine Standard

• The pipes can be connected to Scirocco (TWINLINE Ø 76 mm only) or Typhoon (TWINLINE Ø 76 mm and Ø 102 mm) aerators.

Technical characteristics:

A (in mm): 116.

B (in mm): 119.

C (in mm): 101.6.

D (in mm): 180.

Flow rate (m3/min): 7.

Inner sheath diameter (in mm): 102.

Power (in Volts): 24.

Remote control only for AA730 HHR.

AA342 Dual Windlass Controller.

For use with windlasses, davits, thrusters, and other marine equipment. AA341 General Dual Equipment Controller.

Electrical protection against counter-electromotive force.

Made with a rubber overmold for impact protection and optimal grip. Storage cradle.

Works in parallel with any AutoAnchorâ"¢ product, rocker switches, foot switches, or other control equipment. Connectable to DC, AC, and hydraulic systems.

Heavy duty 4.5m coiled cable and connectors.

All products are IP67 rated, including cables, plugs and sockets.

For use with windlasses, davits, thrusters, and other marine equipment. AA341 General Dual Equipment Controller.

Electrical protection against counter-electromotive force.

Made with a rubber overmold for impact protection and optimal grip. Storage cradle.

Works in parallel with any AutoAnchorâ"¢ product, rocker switches, foot switches, or other control equipment. Connectable to DC, AC, and hydraulic systems.

Heavy duty 4.5m coiled cable and connectors.

All products are IP67 rated, including cables, plugs and sockets.

Use for windlasses, davits, thrusters and other marine equipment.

Electrical protection against counter-electromotive force.

Made with a rubber overmold for impact protection and optimal grip. Storage cradle.

Works in parallel with any AutoAnchorâ"¢ product, rocker switches, foot switches, or other control equipment. Connectable to DC, AC, and hydraulic systems.

Heavy duty 4.5m coiled cable and connectors.

All products are IP67 rated, including cables, plugs and sockets. Bridge socket with 2m flying lead reducing the risk of corrosion (except AA320 series)

Heavy-duty solenoids for RC12 Series dual-direction windlasses are used in conjunction with the remote up/down panel, AutoAnchorâ"¢ rod counters, mobile handheld remotes and/or foot switches to switch the motor in the required direction.

They are suitable for our winch motors. Available in 24V DC for 2-terminal permanent magnet (PM), 3-terminal series-wound (SW) and 4-terminal field-wound (FW) motors.

Ignition-protected solenoids. Installation in a dry location is always recommended.

Heavy-duty solenoids for the RC8-8 RC10 and RC12 series dual-direction windlasses are used in conjunction with the remote up/down panel, AutoAnchorâ"¢ rod counters, mobile handheld remotes and/or foot switches to switch the motor in the required direction.

They are suitable for our winch motors. Available in 24V DC for 2-terminal permanent magnet (PM), 3-terminal series-wound (SW) and 4-terminal field-wound (FW) motors.

Ignition-protected solenoids. Installation in a dry location is always recommended.

Heavy-duty solenoids for the RC8-8 RC10 and RC12 series dual-direction windlasses are used in conjunction with the remote up/down panel, AutoAnchorâ"¢ rod counters, mobile handheld remotes and/or foot switches to switch the motor in the required direction.

They are suitable for our winch motors. Available in 12V DC for 2-terminal permanent magnet (PM), 3-terminal series-wound (SW) and 4-terminal field-wound (FW) motors.

Ignition-protected solenoids. Installation in a dry location is always recommended.

Heavy-duty solenoids for the RC6 and RC8-6 Series dual-direction windlasses are used in conjunction with the remote up/down panel, AutoAnchorâ"¢ rod counters, mobile handheld remotes and/or foot switches to switch the motor in the required direction.

They are suitable for our winch motors. Available in 24V DC for 2-terminal permanent magnet (PM), 3-terminal series-wound (SW) and 4-terminal field-wound (FW) motors.

Ignition-protected solenoids. Installation in a dry location is always recommended.

Heavy-duty solenoids for the RC6 and RC8-6 Series dual-direction windlasses are used in conjunction with the remote up/down panel, AutoAnchorâ"¢ rod counters, mobile handheld remotes and/or foot switches to switch the motor in the required direction.

They are suitable for our winch motors. Available in 12V DC for 2-terminal permanent magnet (PM), 3-terminal series-wound (SW) and 4-terminal field-wound (FW) motors.

Ignition-protected solenoids. Installation in a dry location is always recommended.

One-way solenoids should be used when only one-way motor rotation is required. For example, capstan winches.

Features :

Single/Double Relay: Single.

Voltage (V): 24.

One-way solenoids should be used when only one-way motor rotation is required. For example, capstan winches.

Features :

Single/Double Relay: Single.

Voltage (V): 12.

This robust and durable unit, made of black synthetic material, is weather-resistant and features a UV-stabilized waterproof diaphragm. Its current draw capacity is 150A.

Supplied with assembly instructions and screws.