Vetus marine parts - Page 131

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 55.

Dimensions (mm): 680*780.

Height (mm): 250.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 160.

Dimensions (mm): 790*1420.

Height (mm): 270.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 100 (?).

Dimensions (mm): 1170*1490.

Height (mm): 240.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 100.

Dimensions (mm): 790*1000.

Height (mm): 270.

Base tank with easy-to-screw inspection cover, made of very high-quality synthetic materials and

identical to those of rigid tanks. The wall thickness is 7mm.

Supplied with all necessary fittings, saving considerable installation time. Fixed hose connector Ø 38 mm for filling and fixed hose connector Ø 16 mm for venting. Rotating hose connector Ø 13 mm with pick-up hose for water suction.

A center point for an SAE flange pressure gauge transmitter is integrated into the casting, along with five blind bolt holes.

Features :

Tank volume (liter): 80.

Ø Filling (mm): 38.

Ø Suction (mm): 16.

Ø Vent (mm): 13.

Base tank with easy-to-screw inspection cover, made of very high-quality synthetic materials and

identical to those of rigid tanks. The wall thickness is 7mm.

Supplied with all necessary fittings, saving considerable installation time. Fixed hose connector Ø 38 mm for filling and fixed hose connector Ø 16 mm for venting. Rotating hose connector Ø 13 mm with pick-up hose for water suction.

A center point for an SAE flange pressure gauge transmitter is integrated into the casting, along with five blind bolt holes.

Features :

Tank volume (liter): 60.

Ø Filling (mm): 38.

Ø Suction (mm): 16.

Ø Vent (mm): 13.

Base tank with easy-to-screw inspection cover, made of very high-quality synthetic materials and

identical to those of rigid tanks. The wall thickness is 7mm.

Supplied with all necessary fittings, saving considerable installation time. Fixed hose connector Ø 38 mm for filling and fixed hose connector Ø 16 mm for venting. Rotating hose connector Ø 13 mm with pick-up hose for water suction.

A center point for an SAE flange pressure gauge transmitter is integrated into the casting, along with five blind bolt holes.

Features :

Tank volume (liter): 40.

Ø Filling (mm): 38.

Ø Suction (mm): 16.

Ø Vent (mm): 13.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 24.

Capacity (Ipm): 20.

Pressure (bar): 4.2.

Amperage (A): 10.

L x W x H (mm): 229 x 147 x 132.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 24.

Capacity (Ipm): 13.2.

Pressure (bar): 3.1.

Amperage (A): 4.

L x W x H (mm): 212 x 130 x 123.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 24.

Capacity (Ipm): 7.6.

Pressure (bar): 2.1.

Amperage (A): 3.

L x W x H (mm): 212 x 130 x 123.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 12.

Capacity (Ipm): 20.

Pressure (bar): 4.2.

Amperage (A): 17.

L x W x H (mm): 229 x 147 x 132.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 12.

Capacity (Ipm): 13.2.

Pressure (bar): 3.1.

Amperage (A): 7.

L x W x H (mm): 212 x 130 x 123.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 12.

Capacity (Ipm): 7.6.

Pressure (bar): 2.1.

Amperage (A): 5.

L x W x H (mm): 212 x 130 x 123.

Made of high-quality polyamide, this compact, small-capacity accumulator with a rubber diaphragm ensures a constant flow rate in the container's water circuit. The pressure in the accumulator prevents the water pump motor from starting every time a water supply is required, and the butyl rubber diaphragm is suitable for drinking water. Connection is easy as there is no preferred IN or OUT connection on this accumulator.

It ensures a constant water flow, saves energy and minimizes noise. The accumulator is set to a precharge pressure of 0.7 bar, but can be adjusted to optimal settings for your freshwater system (up to a maximum of 8.5 bar).

The overall dimensions are 223mm x 194mm x 114mm and the accumulator is supplied with two angled and two straight 13mm pipe stands.

Features :

Temperature range: 0 to 50 degrees Celsius.

Width (mm): 194.

Height (mm): 114.

Length (mm): 223.

Capacity (liters): 0.75.

Weight (kg): 0.36.

Pipe connection diameter (mm): 13.

Max. pressure (bar): 8.5.

The PFWS system is meticulously designed to ensure a clean and stable water supply every time your boat is out.

Equipped with an adjustable pressure switch, the PFWS allows you to customize the water pressure to suit your specific needs. Ensuring a constant water flow for any onboard activity requiring water. The self-priming pump eliminates the hassle of manually priming the pump, saving you time and effort.

Additionally, the check valve prevents backflow, ensuring the integrity of your water supply and preventing contamination. With a built-in pressure gauge, you can easily monitor water pressure in real time, providing valuable information to optimize system performance. The inlet water filter filters out all impurities, ensuring your water supply remains clean and pure.

Features :

Voltage (V): 24.

Capacity (liters): 19.

Weight (kg): 9.5.

Pipe connection diameter (mm): 19.

Max. pressure (bar): 4.2.

Max. suction height (m): 1.8.