VETUS Fresh Water Systems – Comfort and hygiene onboard - Page 2

Standard double coil water heater type WHT in stainless steel and insulated with 50mm thick polyester foam.

This range of dual-coil water heaters will double your onboard hot water comfort. One heating coil can be connected to the engine's cooling circuit to utilize excess engine heat. The other coil can be connected to an integrated heating system.

All water heaters are supplied with: a 1500 watt electric heating element, 6 x 16mm pipe connectors and a 6 bar pressure limiter / non-return valve.

Features :

Fresh water capacity (liter): 25.

Coolant capacity (liter): 0.5.

Engine coolant connection: G 1/2.

Fresh water connection: G 1/2.

Heating element connection: G 1 1/4.

Fresh water relief valve setting: 6 bar (87 psi).

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 75.

Coolant capacity (liter): 9.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 55.

Coolant capacity (liter): 7.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 45.

Coolant capacity (liter): 5.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 31.

Coolant capacity (liter): 3.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 20.

Coolant capacity (liter): 2.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

2-piece lashing straps 3m x 25mm with VETUS logo.

Made of high-quality polyethylene, this large-capacity tank can handle all the liquids you need to store on your boat. It features an inspection hatch and can accommodate the ILT concept. For easy opening, there's a flange in the cap. At the bottom, there's a 38mm connection that can be drilled for interconnection or drainage.

Thanks to the large inspection hole (140 mm), the tank complies with ISO 2148. Depending on the type of use you have for this tank, a suitable connection kit is available. The tank is easy to install and has enough capacity for long cruises.

Features :

Width (mm): 390.

Capacity (liters): 100.

Length (mm): 1010.

Height (mm): 315.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 390.

Length (mm): 1400.

Width (mm): 400.

Height (mm): 800.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 335.

Length (mm): 1700.

Width (mm): 700.

Height (mm): 350.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 215.

Length (mm): 1000.

Width (mm): 400.

Height (mm): 600.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 170.

Length (mm): 110.

Width (mm): 440.

Height (mm): 400.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 137.

Length (mm): 1200.

Width (mm): 400.

Height (mm): 330.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 110.

Length (mm): 1200.

Width (mm): 350.

Height (mm): 290.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 88.

Length (mm): 800.

Width (mm): 400.

Height (mm): 330.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 61.

Length (mm): 660.

Width (mm): 350.

Height (mm): 290.

Color: Translucent light blue.

This tank is made of high quality, thick-walled polyethylene which is both rust-free and less prone to

condensation compared to metal tanks. Due to the seamless construction of the tanks, leakage is impossible. The thickness of its wall prevents the penetration of odors and deformation of the tank.

The tank is suitable for diesel fuel and up to an ambient temperature of 100°C. In addition, the content level is visible from the outside for easy monitoring.

The ATANK range is also suitable for drinking water or wastewater

The tank is supplied without fittings and can therefore be installed wherever you wish.

Fittings are available and can be ordered separately on our website.

The tanks come with labels that allow you to specify the contents of the tank (diesel, fresh water or waste water).

Features :

Capacity (liters): 42.

Length (mm): 460.

Width (mm): 350.

Height (mm): 290.

Color: Translucent light blue.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 70.

Dimensions (mm): 780*780.

Height (mm): 270.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 220.

Dimensions (mm): 740*1040.

Height (mm): 270.

Ces réservoirs peuvent être installés facilement et rapidement- ils prennent la forme de l'espace dans lequel ils sont

placés. Souvent, ils peuvent être utilisés dans des espaces difficiles d'accès. Tous les raccords sont fournis en standard.

Le montage du raccord de sortie et le raccordement des tuyaux d'entrée et de sortie sont les seules choses à réaliser.

Fournis avec :

• Un raccord droit pour le remplissage Ø 38 mm

(monté sur le haut du réservoir)

• Un raccord coudé pour le pompage Ø 16 mm

Des raccords supplémentaires peuvent être fournis en option.

Le réservoir souple VETUS est composé de trois couches :

1. Une couche de résistance

2. Une couche de renfort

3. Une couche neutre pour le contact avec l'eau potable

Caractéristiques :

Capacité (litre) : 55.

Dimensions (mm) : 680*780.

Hauteur (mm) : 250.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 160.

Dimensions (mm): 790*1420.

Height (mm): 270.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 100 (?).

Dimensions (mm): 1170*1490.

Height (mm): 240.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 100.

Dimensions (mm): 790*1000.

Height (mm): 270.

Base tank with easy-to-screw inspection cover, made of very high-quality synthetic materials and

identical to those of rigid tanks. The wall thickness is 7mm.

Supplied with all necessary fittings, saving considerable installation time. Fixed hose connector Ø 38 mm for filling and fixed hose connector Ø 16 mm for venting. Rotating hose connector Ø 13 mm with pick-up hose for water suction.

A center point for an SAE flange pressure gauge transmitter is integrated into the casting, along with five blind bolt holes.

Features :

Tank volume (liter): 80.

Ø Filling (mm): 38.

Ø Suction (mm): 16.

Ø Vent (mm): 13.