VETUS pump for pressurized onboard freshwater systems

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 24.

Capacity (Ipm): 20.

Pressure (bar): 4.2.

Amperage (A): 10.

L x W x H (mm): 229 x 147 x 132.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 24.

Capacity (Ipm): 13.2.

Pressure (bar): 3.1.

Amperage (A): 4.

L x W x H (mm): 212 x 130 x 123.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 24.

Capacity (Ipm): 7.6.

Pressure (bar): 2.1.

Amperage (A): 3.

L x W x H (mm): 212 x 130 x 123.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 12.

Capacity (Ipm): 20.

Pressure (bar): 4.2.

Amperage (A): 17.

L x W x H (mm): 229 x 147 x 132.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 12.

Capacity (Ipm): 13.2.

Pressure (bar): 3.1.

Amperage (A): 7.

L x W x H (mm): 212 x 130 x 123.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 12.

Capacity (Ipm): 7.6.

Pressure (bar): 2.1.

Amperage (A): 5.

L x W x H (mm): 212 x 130 x 123.

Made of high-quality polyamide, this compact, small-capacity accumulator with a rubber diaphragm ensures a constant flow rate in the container's water circuit. The pressure in the accumulator prevents the water pump motor from starting every time a water supply is required, and the butyl rubber diaphragm is suitable for drinking water. Connection is easy as there is no preferred IN or OUT connection on this accumulator.

It ensures a constant water flow, saves energy and minimizes noise. The accumulator is set to a precharge pressure of 0.7 bar, but can be adjusted to optimal settings for your freshwater system (up to a maximum of 8.5 bar).

The overall dimensions are 223mm x 194mm x 114mm and the accumulator is supplied with two angled and two straight 13mm pipe stands.

Features :

Temperature range: 0 to 50 degrees Celsius.

Width (mm): 194.

Height (mm): 114.

Length (mm): 223.

Capacity (liters): 0.75.

Weight (kg): 0.36.

Pipe connection diameter (mm): 13.

Max. pressure (bar): 8.5.