List of products by brand VDO

Oil pressure sensor for VDO type instrumentation with 2 indicators, double positions.

Probe with ground return 1/8-27NPT 0-5 BAR

The Viewline range's dual-display hour meters provide clear and easy readings of battery status and engine hours. The LCD display cycles between battery and engine hours every 10 seconds.

IP 67 protection on the front and IP 52 on the back.

Diameter: 52 mm.

9 - 48 V DC.

TEMPERATURE INDICATOR 120°C WHITE

Engine cooling indicator

Color: black

Panel Hole Diameter: 52mm - 2 1/16"

Range: +40°C to +120°C

Lens: Double - Anti-fog

2-pole oil and air pressure sensor for 1 engine.

0-10 BAR M10

Isolated from the mass

Not suitable for measuring water pressure

VDO oil pressure and alarm sensor for the following Mercruiser diesel engines:

- 530D - 636D-TA

- D183 TURBO AC

- D219 TURBO AC

- D254 - D254 TURBO AC

5000RPM BLACK REV COUNTER HOUR METER

ViweLine 5000rpm all-rounder, black.

Connection to terminal W, terminal 1, inductive sensor, Hall effect sensor, generator or coil

Sonde de pression retour par la masse 12v ( 1 pôle ) :

- 0-10 BAR

- 1/8 NPTF

- Une connectique

Sonde isolée par la masse ( 2 connectiques ) disponible sur demande.

4000RPM BLACK REV COUNTER HOUR METER

ViweLine 4000rpm all-rounder, black.

Connection to terminal W, terminal 1, inductive sensor, Hall effect sensor, generator or coil

5BAR BLACK OIL PRESSURE INDICATOR

VDO Viewline Series Oil Pressure Gauge

Color: black

Panel Hole Diameter: 52mm - 2 1/16"

Range: 0 to 5 bar

Lens: Double - Anti-fog

THERMO CONTACT VDO 11/17/16

Thermocontact - 3W power for cylinder head temperature control.

Contact point: 95±3°C

Thread: M14 x 1.5

Pressure sensor for 2 indicators - double post

Not suitable for measuring water pressure

The deep pipe level sensor is ideal for use in fuel tanks.

Its 38 mm diameter vertical tube contains a float inside, which measures a liquid level.

The small holes at the top and bottom of the tube act as a deflector for fuel sloshing around in the fuel tank, so that the float position remains stable in any sea state.

The sensors are manufactured in different lengths ranging from 150 mm to 1200 mm

Please ensure the length chosen is at least 4mm from the base of the fuel tank when installed.

Signal: 90-4 OHM

The deep pipe level sensor is ideal for use in fuel tanks.

Its 38 mm diameter vertical tube contains a float inside, which measures a liquid level.

The small holes at the top and bottom of the tube act as a deflector for fuel sloshing around in the fuel tank, so that the float position remains stable in any sea state.

The sensors are manufactured in different lengths ranging from 150 mm to 1200 mm

Please ensure the length chosen is at least 4mm from the base of the fuel tank when installed.

Signal: 90-4 OHM

300MM TUBULAR FUEL GAUGE

Stainless steel turbular fuel level sensor. 38mm tube with Sureseal plug.

Its 38 mm diameter vertical tube contains a float inside, which measures a liquid level.

The small holes at the top and bottom of the tube act as a deflector for fuel sloshing around in the fuel tank, so that the float position remains stable in any sea state.

The sensors are manufactured in different lengths ranging from 150 mm to 1200 mm

Please ensure the length chosen is at least 4mm from the base of the fuel tank when installed.

Signal: 90-4 OHM

White hour meter, 52mm hole diameter.

Oil and air pressure sensor

Isolated from the mass

Alarm switch

Not suitable for measuring water pressure

Alert: 0.8 bar

Measuring range: 0 - 10 bar

Pressure: 10 bar

Depth: 19.5 mm

Thread: 1/8-27 NPTF

Voltage: 6 - 24 V

Water or oil temperature sensor

isolated from the mass

Thread: M14 x1.5

Measuring range from 40° to 120°C

Connection by 6.3 mm Faston terminal (AMP)

OIL PRESSURE PROBE -0-5BAR - INSULATED

1/8-27NPTF

Oil pressure sensor isolated from ground.

FUEL INDICATOR VDOA2C59514082

VDO Viewline fuel gauge for tanks. Can be used with several sensor models.

Comes with mounting accessories.

- voltage 10-16 V, 16-32 V with optional resistors, reverse polarity protection

- consumption: <130 mA

- connection via 8-pole MQS Tyco/Hirschmann connector

- LED lighting and integrated red LED alarm light

- input: standard resistance values ??(10-180 ohms), isolated

- mounting diameter: 52 mm

- installation depth: 60 mm

- outer diameter of the front face: 62.5 mm, available in white, black or chrome

- anti-condensation with double glass, IP 67 front face

- optional alarm trigger to control the red alarm LED

- a corresponding sensor is available as an option

Water or oil temperature sensor

Return by mass

Filetage: M14 x 1.5

Measuring range from 40° to 120°C

Alarm contactor: 90 °C (±3°C)

Wire connection Faston 6.3 mm (AMP)