STRAIGHT BRASS WATER FITTING - 1-1/2" X 38MM
Straight cooling connector, size 1-1/2" for 38mm diameter hose.
Thread: 1-1/2"
Hose inner diameter: 38mm
Straight cooling connector, size 1-1/2" for 38mm diameter hose.
Thread: 1-1/2"
Hose inner diameter: 38mm
Straight cooling connection, size 1-1/2" for 45mm diameter hose.
Thread: 1-1/2"
Hose inner diameter: 45mm
Straight cooling connector, size 1-1/2" for 40mm diameter hose.
Thread: 1-1/2"
Hose inner diameter: 40mm
3/8 straight connector for 13mm 1/2 diameter hose.
Straight plastic fitting resistant to chemicals, insensitive to paints, antifouling, diesel/petrol fuel and does not degrade with ultraviolet rays.
Operating range -40°C to 110°C.
Thread: 3/4" BSP
Hose: 19mm
Straight connector diameter 45mm for Sherwood P1727C pump.
Required as part of the conversion kit for older P1722C pumps.
Remember to add the SHE21525 O-ring.
Straight connector diameter 52mm for Sherwood P1727C pump.
Required as part of the conversion kit for older P1722C pumps.
Remember to add the SHE21525 O-ring.
Straight plastic reducing fitting resistant to chemicals, insensitive to paints, antifouling, diesel/petrol fuel and does not degrade with ultraviolet rays.
Operating range -40°C to 110°C.
Reduction 38-32 mm.
Water connection present on the Volvo Penta exhaust elbow with a diameter of 50mm.
Engine application:
D5A-T
D5A-B
D5A-TA
D7A-T
D7A-TA
D7A-B TA
D7C-TA
D7C-B TA
TAMD63L-A
TAMD63P-A
TAMD71B
TAMD73P-A
TAMD73WJ-A
TAMD74A
TAMD74A-A
TAMD74A-B
TAMD74C-A
TAMD74C-B
TAMD74L-A
TAMD74L-B
TAMD74P-A
TAMD74P-B
TAMD75P-A
1-1/4 brass water fitting for Yanmar exhaust elbow.
40mm water connection.
Assembly :
4LHA-DTE
4LHA-DTP
4LHA-DTZE
4LHA-DTZEP
4LHA-HTE
4LHA-HTP
4LHA-HTZE
4LHA-HTZEP
4LHA-STP
4LHA-STZE
4LHA-STZP
4LV-150
4LV-170
4LV-195
4LV-230
4LV-250
6LP-DTE
6LP-STC2
6LP-STE
6LPA DTP
6LPA-DPT
6LPA-DTZE
6LPA-DTZEP
6LPA-DTZP
6LPA-STP
6LPA-STZE
6LPA-STZEP
6LPA-STZP
8LV-320
8LV-320Z
8LV-350
8LV-370
8LV370Z
Connection for water riser hose on Volvo Penta base.
Remember to add gasket 3852535.
1/4 concave flare reducer fitting with strainer for installation on trim pump.
Fitting present on the 115HP hydraulic steering cylinder.
Beige 0.004" shim included in kit 23365.
Application for OMC COBRA and VOLVO SX base.