The WPANEL panel can control up to 5 wiper motors to operate synchronously at high or low speed.

Each wiper motor is switched individually, so you can choose which wipers are operational.

They also have a combination switch for washing/wiping screen activation, speed selection and wiping interval delay. The wiper motors to be connected must have a 2-speed motor and an automatic parking position.

Up to three MARBO rain sensors (1 x MARBO and 2 x MARBO2) can be connected to the control unit. The rain sensor function can be activated by the

control panel provided and can activate all connected wipers simultaneously.

The WPANEL type comes with:

• 1 control box with electronic overload protection (DIN rail mounting).

• 5 wiper motor switches.

• 1 combination switch for washing/wiping and speed selection.

• 1 mounting plate with space for 6 switches and 2 plates.

Features :

• Available for 12 or 24 volt DC power supply.

• Standby power consumption approx. 10 mA.

• Maximum power per wiper motor 120 W.

• Internal fuses 10 A per wiper motor, 5 A for screen wash pump or solenoid valve.

• Dimensions control panel 49 x 24 x 37.5 mm, control unit 159 x 90 x 58 mm.

Complete windshield washer kit type which includes a reservoir with integrated pump, a tube with non-return valve, a rotary switch and a unique long double spray nozzle to reach the thick frame of the windshield

An extension kit (code HDSXTB) consisting of a second dual spray nozzle, additional hose and T-fitting is available and recommended to maintain sufficient flow and pressure.

Features

Voltage (in V): 24.

Intensity (in A): 0.90.

Tube length: 3 m

Tank capacity: 1.5 liters

Pump flow rate: 0.88 liters/min.

Plastic cover for RW and DIN range motors.

By installing the plastic cover you reduce the indicated panel thickness by 3 mm.

Comes complete with base plate.

Rotating portholes - SLR type

Perfect vision in all circumstances!

The centrifugal force caused by the rotating tempered glass, which reaches its maximum revolutions per minute in 25 seconds, instantly clears the screen of rain, snow and spray.

Even dirt and salt won't cause smears.

The SLR range is available in 2 sizes and meets all EMC requirements.

Characteristic :

Cut Ø A (in mm): 326.

Ø B (in mm): 300.

Ø C (in mm): 350.

Consumption (in V): 12.

Ultra-thin portholes - Type PL (AI)

The PL series portholes are so flush that they resemble fritted glass and are suitable for installation in

a variety of materials.

Despite their low thickness, they are still CE approved for the AI location area, which means they can be used for all areas listed in the ISO standard! A very flat aluminum edge combined with the clamping mechanism ensures a very low-profile porthole even when mounted in the glass itself. They are also equipped with the new ergonomic buttons.

These ultra-thin portholes can accept panel thicknesses ranging from 2 to 20 mm. The inside of the clamping profile can be finished with the supplied trim. All

PL portholes are made of fashionable satin black aluminum with 10mm thick "black smoke" tinted acrylic for a premium look.

Features :

External dimensions A x B (in mm): 646 X 191.

Cut-out dimensions C x D (in mm): 626 X 171.

Replacement mosquito net: HOR741.

Ultra-thin portholes - Type PM (AI)

The PL series portholes are so flush that they resemble fritted glass and are suitable for installation in

a variety of materials.

Despite their low thickness, they are still CE approved for the AI location area, which means they can be used for all areas listed in the ISO standard! A very flat aluminum edge combined with the clamping mechanism ensures a very low-profile porthole even when mounted in the glass itself. They are also equipped with the new ergonomic buttons.

These ultra-thin portholes can accept panel thicknesses ranging from 2 to 20 mm. The inside of the clamping profile can be finished with the supplied trim. All

PL portholes are made of fashionable satin black aluminum with 10mm thick "black smoke" tinted acrylic for a premium look.

Features :

External dimensions A x B (in mm): 390 x 220.

Cut-out dimensions C x D (in mm): 366 x 196.

Cutting radius R (in mm): 98.

Replacement mosquito net: HOR15.