GROWER WASHER 7/16

Stainless steel swivel collar, 25mm wide.
Clamping range 79 - 85mm.
W4 standard.
Synthetic marine gear oil
High-performance marine transmission oils are designed to provide the best protection for IPS and Aquamatic products. They are specially formulated to deliver excellent performance under high load and temperature constraints. Their formulation maintains a perfect balance between their adhesion and lubrication capacity to limit wear and corrosion. Specific additives derived from the most advanced technologies offer a unique ability to minimize damage due to water contamination. All this guarantees significant advantages over conventional transmission oils and contributes to better performance, smoother operation, and longer transmission life.
90° elbow fitting in NYLON, size 3/4 X 1.
Thread: 3/4
Hose: 25mm
Stainless steel swivel collar, 25mm wide.
Clamping range 73-79mm.
W4 standard.
Quicksilver 2-4-C Marine Grease with PTFE is a premium, lithium-based, extremely versatile NLGI 2 grease that will not decompose when mixed with water.
It also has the following advantages:
- Perfect resistance against oxidation and degradation
- Extreme pressure additives to resist friction loads in various operations and at different temperatures.
Designed for use in the following marine applications:
- Steering systems/cable linkages
- Accelerator and gear shift cables and linkages
- Remote controls
- Propeller shafts
- Articulation axes
- Locking mechanisms/lift tube
- Pins
- Boat trailer wheel bearings
Norma stainless steel collar, 12mm wide.
Clamping range 40 - 60mm.
W4 standard.
YANMAR SAE30 gear oil.
1 liter can.
Standard: API-CF ACEA: E2
1" NPT - 33.24mm diameter plug with female head.
Stainless steel nylon stop nut with shoulder.
Pate à joint aviation haute température 473ML.
Mercury Quickstor Fuel Stabilizer treats 227 liters of fuel.
Color code RED
Corrosion Guard is a rust inhibitor that forms a waterproof barrier on varnished and unvarnished surfaces.
It is used to protect against corrosion formation on external bases, lower units, hydraulic lift motors and metal surfaces.
It can also be applied to prevent further damage to paintwork on surfaces where underlying corrosion and blistering has occurred.
Do not apply to surfaces coated with antifouling or biocidal paint. Do not spray on drive belts.
312 g (11 oz) spray
Quicksilver Branded
DEI titanium lava stone heat shield tape for exhaust insulation.
Withstands direct heat of 650°C and radiant heat of 1100°C.
Reduces exhaust temperature and decreases heat radiation by up to 50%.
Very flexible for optimal fit on the part.
Sold in reels.
Length: 4.5 meters.
Width: 5 cm.
Color: titanium black.