Marine workshop tools and equipment - Page 4

Mercruiser 3/4 NPT x 1" Plastic Exhaust Manifold Coolant Fitting

For 25mm diameter hose.

Thread: 3/4

Hose: 25mm

Also available in plastic version under reference 13991.

ABA stainless steel collar, 12mm wide.

Clamping range 38 - 50mm.

W5 ACID standard.

Semi-synthetic OEM lubricant specially formulated for SUZUKI 4T Gasoline Outboard engines operating in severe conditions, requiring an NMMA FC-W approved oil. The NMMA FC-W standard developed specifically for lubricants intended for marine engines, tightens the lubricant requirements compared to ordinary marine oils on the following points:

* Higher HTHS viscosity at 150°C to ensure better oil film resistance at high temperatures and to absorb dilution during prolonged idling phases.

* High temperature grade 40 to maintain better protection in severe use and tropical climates.

* Improved shear strength to maintain high temperature properties.

* Very high anti-corrosion properties to combat corrosion caused by seawater or salt spray that can rise into the combustion chamber via the exhaust. Better anti-corrosion protection during winter storage periods.

* Preservation of the original properties of the oil in case of contamination by sea water.

* Better resistance to oxidation.

* Anti-foam properties to prevent foaming and the introduction of air bubbles into the oil circuit.

* Anti-clogging properties for better protection of oil filters.

Packaging in 5 liter cans.

ABA stainless steel collar, 12mm wide.

Clamping range 44 - 56mm.

W5 ACID standard.

Norma stainless steel collar, 12mm wide.

Clamping range 70 - 90mm.

W4 standard.

Stainless steel swivel collar, 18mm wide.

Clamping range 40 - 43 mm.

W4 standard.

VDS-4.5 engine oil

VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and environmental conditions. It is therefore fully compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines. Refer to the owner's manual.

Viscosity: SAE 15W-40

Standard: CI-4/ ECF-3 / ACEA E9 / E7

ABA stainless steel collar, 12mm wide.

Clamping range 50 - 65mm.

W5 ACID standard.

Stainless steel swivel collar, 18mm wide.

Clamping range 31-34 mm.

W4 standard.

Stainless steel swivel collar, 18mm wide.

Clamping range 43 - 47 mm.

W4 standard.

Synthetic 25W50 oil is often recommended for engines used in racing. This high-performance oil provides optimal lubrication for your marine engine.

This oil:

• Maintains viscosity under the most extreme operating conditions such as

• Racing: Engine operating at maximum power and high temperatures

• Water sports and fishing: Alternating between periods of high revs and deceleration to low revs or idle

• Protects against varnish buildup and sediment formation

• Exceeds rust protection requirements for NMMA certification

Recommended for use with Verado® outboards and other high-performance marine engines

Exceeds all manufacturers' warranty requirements and recommendations for using FCW® 25W50 oil

4 Liters

Stainless steel fitting with a light zinc dichromate coating allowing the connection between the exhaust manifold and the exhaust elbow. Reverse thread for assembly of the 2 elements.