Tool for maintaining hydraulic steering during transport.

- Eliminates lateral movement on the path.

- Quick and easy installation on the jack.

- Robust and durable

A simple and effective product for professional and private use!

Propeller tool kit for the following Volvo Penta drives:

DP-SM

DPS-A

SX-A

DPS-B

XDP-B.

Kit for dismantling D, F, FH, I and IH series propellers.

CorrosionX® is the ultimate cleaner, lubricant, and protectant for firearms of all kinds and in all conditions.

CorrosionX uses a revolutionary technology called Polar Bonding, which causes it to molecularly bond to any metal (and subsurface) surface that can oxidize. This unique chemistry offers several advantages over conventional CLPs.

Features :

Cuts through tough dirt for easier, more thorough cleaning

Prevents powder fouling, primer salts and metal particles from adhering to the bore

Adheres to metal like a magnet, so it cannot be moved by moisture, friction, or extreme pressure

Lubricates better and longer than other gun oils - virtually eliminating wear and providing flawless action

Protective products for cars, boats, motorcycles, etc.

RejeX® is a thin-film polymer coating designed to provide a high-release protective finish for vehicles of all types.

This very thin film - less than one micron thick - prevents staining and adhesion of common contaminants such as exhaust fumes, insects, oil, tree sap, bird droppings, road grime, brake dust, etc.

NOTHING STICKS BUT SHINE!â„¢

It's easy to apply and produces a deep, glossy shine that lasts for months.

RejeX does not contain any of the oils found in some other products known to contaminate paint and cause problems.

REJEX APPLICATION

Ideally, apply RejeX to a fresh, dry, clean surface.

When temperatures exceed 85°F, be sure to apply RejeX away from sunlight.

If the surface is too hot, the coating may harden before it has properly bonded to the surface, so it may not perform to its potential.

Let dry for about 20 minutes, wipe dry, then let dry for 8-12 hours (depending on humidity - the higher the humidity, the faster the cure).

Curing is necessary to allow the monomers (polymer building blocks) that make up RejeX to attach to the treated surface and bond into a clear, waterproof film.

It is important to allow RejeX to dry for 8 to 12 hours.

If the coating is exposed to contaminants such as oil, fuel, soot, hard water, tree sap, cleaning products, etc. before it has cured, the contaminants may interfere with or embed the protective film.

REJEX PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS, ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC AND POLISHED METAL SURFACES

RejeX is not intended for use on porous surfaces, heavily oxidized painted surfaces, or to fill fine scratches.

RejeX can be applied in multiple coats, allowing 8 hours of cure time between coats for deeper color and greater depth of gloss.

RejeX has a higher refractive index than waxes, so it produces richer, deeper colors and a long-lasting glossy finish.

RejeX can be used over existing wax - however, the duration of protection will be reduced as the underlying wax degrades more quickly.

There is no reason to wax RejeX. As mentioned before, RejeX leaves a shinier and more durable finish than wax… If a RejeX-treated surface needs repainting, normal paint preparation is all that is required.

Abrasive cleaners, polishes, rubbing compounds, and some chemical strippers may remove RejeX.

CorrosionX® Grease is now available as a premium, versatile, high-performance NLGI #2 grease for extreme pressures.

CorrosionX® Grease is suitable for the harshest marine environments and succeeds exactly where other products fail. We don't know of a better product available on the market today.

Designed to provide maximum shear stability, film strength, and high impact resistance, CorrosionX® Grease provides unsurpassed wear protection under extreme pressure conditions. CorrosionX® Grease is the product of choice for the automotive sector with extreme pressure applications, as well as in the marine, construction, mining, agricultural, woodworking, and transportation industries.

Choose CorrosionX® Grease for your most demanding applications.

Features :

* Polar Bonding technology including

* Premium base oils offer proven oxidation resistance and unmatched performance in marine and freshwater environments.

* Overbased calcium sultanate complex thickener maximizes pumpability, water resistance and high dropping point.

* Superior anti-wear additives lubricate and prevent wear.

* Synergistic corrosion inhibitors protect against rust and corrosion.

* Advanced extreme pressure additive package handles very high loads and shocks.