Marine technical products - Maintenance, protection and performance

CorrosionX® is a multi-purpose oil with excellent anti-seize, anti-wear, anti-corrosion and dielectric (non-conductive substance) properties all in one.

An unbeatable penetrant!!

CorrosionX penetrates faster and deeper than any penetrating fluid you've ever used! Corroded or rusted nuts, bolts, or fittings can usually be removed in minutes. Even items you think are hopelessly seized can usually be salvaged and put back into service.

Long-lasting effect on metal surfaces, for example, with formation of a thin film layer (Fluid Thin Film Coating, FTFC).

Solvent-free, therefore very environmentally friendly.

Does not contain silicone, non-flammable.

Excellent compatibility with other materials.

Does not stick or resinify treated surfaces.

Long-lasting moisture wicking.

Scope of application:

Lubrication of even the finest mechanisms.

Long-term corrosion protection.

Quick disassembly of corroded fittings.

Protection of electrical and electronic components.

Material Compatibility:

Rubber: No visible effects on Buna-N, Viton, or neoprene products. Slight swelling on butyl rubber items.

Painted surfaces:

No effect on paints and varnishes.

Plastics:

No effect on commercially available materials such as acrylic, polyester, nylon, vinyl, formica, polyethylene, polypropylene, PTFE.

Fabric fibers:

CorrosionX® is absorbed by most fibers and causes light stains that can be removed with degreasers.

Storage :

> 10 degrees C, aerosols do not exceed 48 degrees C

CorrosionX® Heavy Duty is a high performance, film-thickened version of CorrosionX®.

It has been specifically developed to provide maximum protection against moisture intrusion and resulting rust and corrosion.

CorrosionX Heavy Duty resists splashes, rain, sea water or even pressure washing.

It is ideal for long-term protection against severe rust and corrosion attacks and in situations where the protected surface is directly exposed to the elements.

Unlike wax-based corrosion barrier coatings, CorrosionX HD will not dry out, harden, or crack.

The coating is self-healing and slowly penetrates existing rust and corrosion, displacing moisture and corrosion-causing electrolytes.

Features :

Extreme protection for metals exposed in the harshest conditions, such as marine, industrial and agricultural applications.

Long-term resistance to water and weather.

Tenaciously resists water movement and washout.

Will not dry out, harden or crack.

Actively prevents electrolysis and galvanic corrosion.

Self-healing and resilient film.

For really tough jobs where you need the ultimate moisture protection, the answer is CorrosionX Heavy Duty.

There is no other product like this on the market today.

Example of marine applications:

- lifting equipment

- trailers

- through-hull fitting - plumbing

- various closures

- bases

- control or steering cable

- winch

- easy disassembly of fittings even years later

CorrosionX® Heavy Duty is a high performance, film-thickened version of CorrosionX®.

It has been specifically developed to provide maximum protection against moisture intrusion and resulting rust and corrosion.

CorrosionX Heavy Duty resists splashes, rain, sea water or even pressure washing.

It is ideal for long-term protection against severe rust and corrosion attacks and in situations where the protected surface is directly exposed to the elements.

Unlike wax-based corrosion barrier coatings, CorrosionX HD will not dry out, harden, or crack.

The coating is self-healing and slowly penetrates existing rust and corrosion, displacing moisture and corrosion-causing electrolytes.

Features :

Extreme protection for metals exposed in the harshest conditions, such as marine, industrial and agricultural applications.

Long-term resistance to water and weather.

Tenaciously resists water movement and washout.

Will not dry out, harden or crack.

Actively prevents electrolysis and galvanic corrosion.

Self-healing and resilient film.

For really tough jobs where you need the ultimate moisture protection, the answer is CorrosionX Heavy Duty.

There is no other product like this on the market today.

Example of marine applications:

- lifting equipment

- trailer

- through-hull fitting - plumbing

- various closures

- bases

- control or steering cable

- winch

- easy disassembly of fittings even years later

Transparent and flexible protective film to ensure effective sealing against rust, corrosion and wear.

Apply several coats to apply the anti-corrosion film. The film peels off easily like a second skin.

This product is particularly effective in protecting printed circuit boards, electrical connectors and contactors.

Protection of all sensitive components and parts of the boat.

Ideal for battery terminals, porthole surrounds and electrical circuits.

Capacity: 400 ml.

Professional bilge and engine cleaner:

• Solvent-free

• Slightly alkaline

• Deep cleans all surfaces polluted by oils, grease, grease, exhaust smoke

• Does not leave a greasy film

Packaging: 750ml spray bottle.

Quicksilver Storage Seal forms a protective barrier against rust formation on internal metal surfaces. It also helps keep cylinders lubricated, preventing cylinder or piston damage when starting the engine after storage.

Use in all 2- and 4-stroke carbureted and fuel-injected gasoline engines, including cars, trucks, motorcycles, ATVs, snowmobiles, marine engines, lawn mowers, chain saws, string trimmers, and snow blowers.

Except for catalyzed engines.

340 g (12 oz) spray

Quicksilver Branded

Protective products for cars, boats, motorcycles, etc.

RejeX® is a thin-film polymer coating designed to provide a high-release protective finish for vehicles of all types.

This very thin film - less than one micron thick - prevents staining and adhesion of common contaminants such as exhaust fumes, insects, oil, tree sap, bird droppings, road grime, brake dust, etc.

NOTHING STICKS BUT SHINE!™

It's easy to apply and produces a deep, glossy shine that lasts for months.

RejeX does not contain any of the oils found in some other products known to contaminate paint and cause problems.

REJEX APPLICATION

Ideally, apply RejeX to a fresh, dry, clean surface.

When temperatures exceed 85°F, be sure to apply RejeX away from sunlight.

If the surface is too hot, the coating may harden before it has properly bonded to the surface, so it may not perform to its potential.

Let dry for about 20 minutes, wipe dry, then let dry for 8-12 hours (depending on humidity - the higher the humidity, the faster the cure).

Curing is necessary to allow the monomers (polymer building blocks) that make up RejeX to attach to the treated surface and bond into a clear, waterproof film.

It is important to allow RejeX to dry for 8 to 12 hours.

If the coating is exposed to contaminants such as oil, fuel, soot, hard water, tree sap, cleaning products, etc. before it has cured, the contaminants may interfere with or embed the protective film.

REJEX PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS, ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC AND POLISHED METAL SURFACES

RejeX is not intended for use on porous surfaces, heavily oxidized painted surfaces, or to fill fine scratches.

RejeX can be applied in multiple coats, allowing 8 hours of cure time between coats for deeper color and greater depth of gloss.

RejeX has a higher refractive index than waxes, so it produces richer, deeper colors and a long-lasting glossy finish.

RejeX can be used over existing wax - however, the duration of protection will be reduced as the underlying wax degrades more quickly.

There is no reason to wax RejeX. As mentioned before, RejeX leaves a shinier and more durable finish than wax… If a RejeX-treated surface needs repainting, normal paint preparation is all that is required.

Abrasive cleaners, polishes, rubbing compounds, and some chemical strippers may remove RejeX.

Mercury Quickstor Fuel Stabilizer treats 227 liters of fuel.

Color code RED

Corrosion Guard is a rust inhibitor that forms a waterproof barrier on varnished and unvarnished surfaces.

It is used to protect against corrosion formation on external bases, lower units, hydraulic lift motors and metal surfaces.

It can also be applied to prevent further damage to paintwork on surfaces where underlying corrosion and blistering has occurred.

Do not apply to surfaces coated with antifouling or biocidal paint. Do not spray on drive belts.

312 g (11 oz) spray

Quicksilver Branded

DEI titanium lava stone heat shield tape for exhaust insulation.

Withstands direct heat of 650°C and radiant heat of 1100°C.

Reduces exhaust temperature and decreases heat radiation by up to 50%.

Very flexible for optimal fit on the part.

Sold in reels.

Length: 4.5 meters.

Width: 5 cm.

Color: titanium black.

High strength all-purpose threadlocker.

Suitable for all 1/4" to 3/4" (6mm to 20mm) nut and bolt applications.

It locks and seals, preventing loosening of parts with vibrations.

Protects threads from corrosion. Removable with hand tools for easy disassembly.

Marine, Automotive, Motorcycle Applications: Valve Cover Bolts, Water Pump Bolts, Oil Pan Bolts, Drive Shaft Bolts, Rocker Arm Adjusting Nuts, Carburetor Studs.

Temperature range: up to 149°C (300°F).

Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N).

Color: red.

6 mL (20 FL OZ) tube.

DEI titanium lava stone heat shield tape for exhaust insulation.

Withstands direct heat of 650°C and radiant heat of 1100°C.

Reduces exhaust temperature and decreases heat radiation by up to 50%.

Very flexible for optimal fit on the part.

Sold in reels.

Length: 15 meters.

Width: 5 cm.

Color: titanium black.

CorrosionX® is the ultimate cleaner, lubricant, and protectant for firearms of all kinds and in all conditions.

CorrosionX uses a revolutionary technology called Polar Bonding, which causes it to molecularly bond to any metal (and subsurface) surface that can oxidize. This unique chemistry offers several advantages over conventional CLPs.

Features :

Cuts through tough dirt for easier, more thorough cleaning

Prevents powder fouling, primer salts and metal particles from adhering to the bore

Adheres to metal like a magnet, so it cannot be moved by moisture, friction, or extreme pressure

Lubricates better and longer than other gun oils - virtually eliminating wear and providing flawless action

Treatment to maintain the octane level in the fuel.

One bottle capable of treating 227 liters of fuel.

Color code Yellow.

Grey Anti-Rust Primer Aerosol 400ml

Rust-inhibiting spray primer designed to protect metal surfaces from corrosion. Creates an insulating layer to prevent moisture and improve paint adhesion.

Quick drying and easy application.

Available in gray and green.

DEI titanium lava stone heat shield tape for exhaust insulation.

Withstands direct heat of 650°C and radiant heat of 1100°C.

Reduces exhaust temperature and decreases heat radiation by up to 50%.

Very flexible for optimal fit on the part.

Sold in reels.

Length: 7.6 meters.

Width: 5 cm.

Color: titanium black.

Green Anti-Rust Primer Spray 400ml

Anti-rust spray primer providing effective protection against corrosion and moisture.

Creates an insulating layer to improve paint adhesion.

Quick drying, easy application. Available in green and gray.

SIKA 291 black 300ML

This Sikaflex is a low-modulus, single-component polyurethane adhesive and sealant. This product is versatile and is used for all types of waterproofing.

300ML cartridge

Professional hand towels, particularly robust and absorbent.

Packaging in rolls of 55 sheets.

SEALED POWER assembly lubricant.

Recommended for bushings, bearings, valve stems, rocker arms.

It increases the load capacity of the engine oil during break-in to prevent seizure.

Contains special additives that withstand extreme pressures.

Petroleum based, it works as an additive to oil and does not affect its viscosity.

113.4 g (4 oz) bottle.

SIKA 291 white 300ML

This Sikaflex is a low-modulus, single-component polyurethane adhesive and sealant. This product is versatile and is used for all types of waterproofing.

300ML cartridge

Kit of 4 sheets of joint paper

Seals for oil, coolant or fuel.

Ideal for making air filter gaskets, oil filler caps, water outlets, fuel pump brackets.

Kit composition:

- 1 sheet of cork-rubber. Dimensions: 25.4 x 21.9. Thickness 3 mm. (10" x 8 5/8" x 1/8").

- 1 sheet of cork-rubber. Dimensions: 23.1 x 21.9. Thickness 1.5 mm. (9 1/8" x 8 5/8" x 1/16").

- 1 sheet of cellulose rubber. Dimensions: 24.7 x 21.9. Thickness 1.1 mm. (9 3/4" x 8 5/8" x 3/64").

- 1 sheet of rubber fiber. Dimensions: 23.5 x 21.9. Thickness 0.8 mm. (9 1/4" x 8 5/8" x 1/32").

Universal, quick-drying two-component primer compatible with all single- and two-component paints.

Excellent adhesion and corrosion protection make it a highly professional product.

Material to be used in combination with the two-component varnish: DM008

PURPLE POWER Professional Aluminum Cleaner

Ideal for reviving and shining aluminum: trailer...

Quickly reduces grease and oil stains.

Restores shine to tarnished aluminum.

3.78 liter (1 gallon) can.