MERCRUISER MPI OPEN EXHAUST ELBOW GASKET
Exhaust elbow joint for Mercruiser engine with new cooling assembly with DRY external water passages.
Joint with two open passages.
Produit non compatible
Voir les produits compatibles
Produit compatible
Barr Marine est un pionnier dans la vente de pièces de remplacement pour les moteurs marins.
DAM Marine commercialise les pièces de Barr Marine du fait de leur qualité et de l'effort fourni par Barr pour rendre ses clients satisfaits. Il faut savoir que Barr Marine et un des seuls fabricant à peindre les composants de remplacement afin qu'ils correspondent aux différentes couleurs de base.
Exhaust elbow joint for Mercruiser engine with new cooling assembly with DRY external water passages.
Joint with two open passages.
Higher V6 V8 thermostat housing.
Kit of 2 closed elbow joints for Mercruiser motor with a temperature exchanger.
For the rigid stainless steel plate you refer to the reference MC2087918.
Exhaust collector for machine Mercruiser V6 old mounting.
Equipment required.
Exhaust pipe for Mercruiser V6 or V8 motors.
Equipment required.
Coude d'échappement pour moteur Mercruiser V8 disposant d'un coude de diamètre 80mm.
Nécessaire de montage inclus.
Exhaust collector for Mercruiser V8 BB GM454 and GM502.
Equipment required.
Coude d'échappement pour moteur Mercruiser disposant d'une sortie diamètre 80mm.
Nécessaire de montage inclus.
Mercruiser exhaust pipe.
Equipment required.
Mapping head for GM engine in line with Velvet drive - Borg Warner series 71 or 72 with a 26-gun coupling.
Mounting the starter in high position or along the oil crankcase.
Engine support with the following characteristics:
Entraxe 100mm with
16mm net.
Support height 47mm
threaded stem height included 70mm.
For a 19mm threaded rod see reference 66284A2.
Entretoise positioning between the elbow and the exhaust manifold of the WTO 4-cylinder 2.5L and 6-cylinders online 165cv to adapt the water passages.
Exhaust pipe for the WTO 4 and 6-cylinder engine up to 1993.
4-cylinder GM153 - 2.5 litres and GM181 - 3 litres before 1990.
Exhaust elbow joint at the end of the collector on the WTO V6 engine type GM229 of 3.8 litres.
Wing plate for old-generation round WWTO exhaust collector type V6 or V8.
Starboard plate for old-generation round WTO exhaust collector type V6 or V8.