List of products by brand VETUS

High silence, minimal back pressure

Our NLP waterlocks feature a two-stage design with upper and lower chambers featuring a horizontal separator plate and a rising tube through the center. Exhaust system installation, even in confined engine spaces, is greatly simplified thanks to the 360° rotating chamber and inlet and outlet connectors. For optimal exhaust noise silencing, you can also use a VETUS silencer and gooseneck after the waterlock.

Capacity: 4.5L

A: 385mm

B: 254mm

C: 165mm

D: 45mm

Comes with 2 fixing straps.

Made from specially blended NAVIDURIN® composite, which is heat resistant up to 260°C.

While the NLP airlock design is already well known for its soundproofing characteristics, versatile installation options and extremely low back pressure, it now adds mechanical properties capable of meeting any challenge and placing it in a unique position on the market.

The thermal resistance to deformation under pressure is 250°C, almost double that of standard GRP materials, while the tensile and flexural strength are the same. What's more, all these advantages are available at a weight almost half that of the competition.

Features a 360° rotating body and endless connection options. Comes with floor and bulkhead mounting brackets and drain plugs for winter storage.

Suitable for 45mm exhaust system.

Features :

Capacity (liters): 4.5.

Length (mm): 385.

Width (mm): 165.

Height (mm): 254.

Airlock position: Vertical.

% Noise Reduction: 35.

High silence, minimal back pressure

Our NLP waterlocks feature a two-stage design with upper and lower chambers featuring a horizontal separator plate and a rising tube through the center. Exhaust system installation, even in confined engine spaces, is greatly simplified thanks to the 360° rotating chamber and inlet and outlet connectors. For optimal exhaust noise silencing, you can also use a VETUS silencer and gooseneck after the waterlock.

Capacity: 4.5L

A: 385mm

B: 254mm

C: 165mm

D: 50mm

Comes with 2 fixing straps.

Made from specially blended NAVIDURIN® composite, which is heat resistant up to 260°C.

While the NLP airlock design is already well known for its soundproofing characteristics, versatile installation options and extremely low back pressure, it now adds mechanical properties capable of meeting any challenge and placing it in a unique position on the market.

The thermal resistance to deformation under pressure is 250°C, almost double that of standard GRP materials, while the tensile and flexural strength are the same. What's more, all these advantages are available at a weight almost half that of the competition.

Features a 360° rotating body and endless connection options. Comes with floor and bulkhead mounting brackets and drain plugs for winter storage.

Suitable for 50mm exhaust system.

Features :

Capacity (liters): 4.5.

Length (mm): 385.

Width (mm): 165.

Height (mm): 254.

Airlock position: Vertical.

% Noise Reduction: 35.

High silence, minimal back pressure

Our NLP waterlocks feature a two-stage design with upper and lower chambers featuring a horizontal separator plate and a rising tube through the center. Exhaust system installation, even in confined engine spaces, is greatly simplified thanks to the 360° rotating chamber and inlet and outlet connectors. For optimal exhaust noise silencing, you can also use a VETUS silencer and gooseneck after the waterlock.

Capacity: 10L

A: 515mm

B: 362mm

C: 210mm

D: 50mm

Comes with 2 fixing straps.

Made from specially blended NAVIDURIN® composite, which is heat resistant up to 260°C.

While the NLP airlock design is already well known for its soundproofing characteristics, versatile installation options and extremely low back pressure, it now adds mechanical properties capable of meeting any challenge and placing it in a unique position on the market.

The thermal resistance to deformation under pressure is 250°C, almost double that of standard GRP materials, while the tensile and flexural strength are the same. What's more, all these advantages are available at a weight almost half that of the competition.

Features a 360° rotating body and endless connection options. Comes with floor and bulkhead mounting brackets and drain plugs for winter storage.

Suitable for 50mm exhaust system.

Features :

Capacity (liters): 10.

Length (mm): 515.

Width (mm): 210.

Height (mm): 362.

Airlock position: Vertical.

% Noise Reduction: 35.

Made from specially blended NAVIDURIN® composite, which is heat resistant up to 260°C.

While the NLP airlock design is already well known for its soundproofing characteristics, versatile installation options and extremely low back pressure, it now adds mechanical properties capable of meeting any challenge and placing it in a unique position on the market.

The thermal resistance to deformation under pressure is 250°C, almost double that of standard GRP materials, while the tensile and flexural strength are the same. What's more, all these advantages are available at a weight almost half that of the competition.

Features a 360° rotating body and endless connection options. Comes with floor and bulkhead mounting brackets and drain plugs for winter storage.

Suitable for 60mm exhaust system.

Features :

Capacity (liters): 10.

Length (mm): 515.

Width (mm): 210.

Height (mm): 362.

Airlock position: Vertical.

% Noise Reduction: 35.

High silence, minimal back pressure

Our NLP waterlocks feature a two-stage design with upper and lower chambers featuring a horizontal separator plate and a rising tube through the center. Exhaust system installation, even in confined engine spaces, is greatly simplified thanks to the 360° rotating chamber and inlet and outlet connectors. For optimal exhaust noise silencing, you can also use a VETUS silencer and gooseneck after the waterlock.

Capacity: 10L

A: 515mm

B: 362mm

C: 210mm

D: 65mm

Comes with 2 fixing straps.

Made from specially blended NAVIDURIN® composite, which is heat resistant up to 260°C.

While the NLP airlock design is already well known for its soundproofing characteristics, versatile installation options and extremely low back pressure, it now adds mechanical properties capable of meeting any challenge and placing it in a unique position on the market.

The thermal resistance to deformation under pressure is 250°C, almost double that of standard GRP materials, while the tensile and flexural strength are the same. What's more, all these advantages are available at a weight almost half that of the competition.

Features a 360° rotating body and endless connection options. Comes with floor and bulkhead mounting brackets and drain plugs for winter storage.

Suitable for 60mm exhaust system.

Features :

Capacity (liters): 10.

Length (mm): 515.

Width (mm): 210.

Height (mm): 362.

Airlock position: Vertical.

% Noise Reduction: 35.

Made from specially blended NAVIDURIN® composite, which is heat resistant up to 260°C.

While the NLP airlock design is already well known for its soundproofing characteristics, versatile installation options and extremely low back pressure, it now adds mechanical properties capable of meeting any challenge and placing it in a unique position on the market.

The thermal resistance to deformation under pressure is 250°C, almost double that of standard GRP materials, while the tensile and flexural strength are the same. What's more, all these advantages are available at a weight almost half that of the competition.

Features a 360° rotating body and endless connection options. Comes with floor and bulkhead mounting brackets and drain plugs for winter storage.

Suitable for 75mm exhaust system.

Features :

Capacity (liters): 10.

Length (mm): 515.

Width (mm): 210.

Height (mm): 362.

Airlock position: Vertical.

% Noise Reduction: 35.

Silence élevé, contre pression minimale

Nos waterlocks NLP sont de construction à deux étages avec des chambres supérieures et inférieures avec une plaque de séparation horizontale et un tube montant à travers le centre. L'installation du système d'échappement, même dans les espaces confinés du moteur, est grandement simplifiée grâce à la chambre tournante à 360 ° et aux connecteurs d'entrée et de sortie. Pour un silencieux optimal du bruit d'échappement, vous pouvez également utiliser un silencieux VETUS et un col de cygne, après le waterlock.

Capacité : 10L

A : 515mm

B : 362mm

C : 210mm

D: 90mm

Livré avec 2 sangles de fixation.

Fabriquée à partir du composite NAVIDURIN® spécialement mélangé, qui résiste à la chaleur jusqu'à 260°C.

Si la conception du sas NLP est déjà bien connue pour ses caractéristiques d'insonorisation, ses possibilités d'installation polyvalentes et sa contre-pression extrêmement faible, elle ajoute désormais des propriétés mécaniques capables de relever tous les défis et qui le placent dans une position unique sur le marché.

La résistance thermique à la déformation sous pression est de 250°C, soit presque le double de celle des matériaux GRP standard, tandis que la résistance à la traction et à la flexion est la même. De plus, tous ces avantages sont disponibles pour un poids presque deux fois inférieur à celui de la concurrence.

Possède un corps rotatif à 360 ° ainsi que des possibilités de raccordement infinies. Livré avec supports de montage pour plancher et cloison et également des bouchons de vidange pour le stockage hivernal.

Convient pour système d'échappement de 90 mm.

Caractéristiques :

Capacité (litres) : 10.

Longueur (mm) : 515.

Largeur (mm) : 210.

Hauteur (mm) : 362.

Position du sas : Verticale.

% Réduction du bruit : 35.

Designed for horizontal installation. The body of this waterlock/silencer consists of 2 rotating chambers and completely sealed hose connections.

rotating, ensuring simple and time-saving installation in a wide range of applications.

Suitable for a wide range of applications - Comes with 2 fixing straps

Capacity: 3L

A: 652 mm

B: 400mm

C: 110mm

D: 40mm

Designed for horizontal installation. The body of this waterlock/silencer consists of 2 rotating chambers and completely sealed hose connections.

rotating, ensuring simple and time-saving installation in a wide range of applications.

Suitable for a wide range of applications - Comes with 2 fixing straps

Capacity: 3L

A: 652 mm

B: 400mm

C: 110mm

D: 45mm

Designed for horizontal installation. The body of this waterlock/silencer consists of 2 rotating chambers and completely sealed hose connections.

rotating, ensuring simple and time-saving installation in a wide range of applications.

Suitable for a wide range of applications - Comes with 2 fixing straps

Capacity: 3L

A: 652 mm

B: 400mm

C: 110mm

D: 50mm

Designed for horizontal installation. The body of this waterlock/silencer consists of 2 rotating chambers and completely sealed hose connections.

rotating, ensuring simple and time-saving installation in a wide range of applications.

Suitable for a wide range of applications - Comes with 2 fixing straps

Capacity: 10L

A: 879mm

B: 500mm

C: 155mm

D: 60mm

Designed for horizontal installation. The body of this waterlock/silencer consists of 2 rotating chambers and completely sealed hose connections.

rotating, ensuring simple and time-saving installation in a wide range of applications.

Suitable for a wide range of applications - Comes with 2 fixing straps

Capacity: 10L

A: 879mm

B: 500mm

C: 155mm

D: 75mm

Conçu pour une installation horizontale. Le corps de ce waterlock / silencieux se compose de 2 chambres tournantes et de raccordements de tuyau complètement

rotatifs, assurant l'installation simple et de gain de temps dans une large gamme d'applications.

Convient à une large gamme d'applications - Livré avec 2 sangles de fixation

Capacité : 10L

A : 879mm

B : 500mm

C : 155mm

D: 90mm

VETUS Type TC exhaust outlet.

Easy mounting on the hull.

The TC type is made from reinforced synthetic material with a decorative AISI 316 stainless steel band.

The exhaust pipe can be mounted directly.

Type: TC090

For hose (inner diameter): 90 mm

Dimension A: hole diameter 93 mm

Dimension B: diameter 141 mm

Dimension C: 110 mm

VETUS Type TC exhaust outlet.

Easy mounting on the hull.

The TC type is made from reinforced synthetic material with a decorative AISI 316 stainless steel band.

The exhaust pipe can be mounted directly.

Type: TC100

For hose (inner diameter): 102 mm

Dimension A: hole diameter 103 mm

Dimension B: diameter 155 mm

Dimension C: 115 mm

VETUS Type TC exhaust outlet.

Easy mounting on the hull.

The TC type is made from reinforced synthetic material with a decorative AISI 316 stainless steel band.

The exhaust pipe can be mounted directly.

Type: TC125

For hose (inner diameter): 127 mm

Dimension A: hole diameter 128 mm

Dimension B: diameter 178 mm

Dimension C: 140 mm

VETUS Type TC exhaust outlet.

Easy mounting on the hull.

The TC type is made from reinforced synthetic material with a decorative AISI 316 stainless steel band.

The exhaust pipe can be mounted directly.

Type: TC150

For hose (inner diameter): 152 mm

Dimension A: hole diameter 153 mm

Dimension B: diameter 203 mm

Dimension C: 150 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC100SV

For hose (inner diameter): 102 mm

Dimension A: hole diameter 103 mm

Dimension B: diameter 140 mm

Dimension C: 117 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC125SV

For hose (inner diameter): 127 mm

Dimension A: hole diameter 128 mm

Dimension B: diameter 169 mm

Dimension C: 140 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC150SV

For hose (inner diameter): 152 mm

Dimension A: hole diameter 153 mm

Dimension B: diameter 194 mm

Dimension C: 153 mm