List of products by brand VETUS

Standard double coil water heater type WHT in stainless steel and insulated with 50mm thick polyester foam.

This range of dual-coil water heaters will double your onboard hot water comfort. One heating coil can be connected to the engine's cooling circuit to utilize excess engine heat. The other coil can be connected to an integrated heating system.

All water heaters are supplied with: a 1500 watt electric heating element, 6 x 16mm pipe connectors and a 6 bar pressure limiter / non-return valve.

Features :

Fresh water capacity (liter): 25.

Coolant capacity (liter): 0.5.

Engine coolant connection: G 1/2.

Fresh water connection: G 1/2.

Heating element connection: G 1 1/4.

Fresh water relief valve setting: 6 bar (87 psi).

Standard double coil water heater type WHT in stainless steel and insulated with 50mm thick polyester foam.

This range of dual-coil water heaters will double your onboard hot water comfort. One heating coil can be connected to the engine's cooling circuit to utilize excess engine heat. The other coil can be connected to an integrated heating system.

All water heaters are supplied with: a 1500 watt electric heating element, 6 x 16mm pipe connectors and a 6 bar pressure limiter / non-return valve.

Features :

Fresh water capacity (liter): 50.

Coolant capacity (liter): 0.5.

Engine coolant connection: G 1/2.

Fresh water connection: G 1/2.

Heating element connection: G 1 1/4.

Fresh water relief valve setting: 6 bar (87 psi).

Standard double coil water heater type WHT in stainless steel and insulated with 50mm thick polyester foam.

This range of dual-coil water heaters will double your onboard hot water comfort. One heating coil can be connected to the engine's cooling circuit to utilize excess engine heat. The other coil can be connected to an integrated heating system.

All water heaters are supplied with: a 1500 watt electric heating element, 6 x 16mm pipe connectors and a 6 bar pressure limiter / non-return valve.

Features :

Fresh water capacity (liter): 75.

Coolant capacity (liter): 0.5.

Engine coolant connection: G 1/2.

Fresh water connection: G 1/2.

Heating element connection: G 1 1/4.

Fresh water relief valve setting: 6 bar (87 psi).

Standard double coil water heater type WHT in stainless steel and insulated with 50mm thick polyester foam.

This range of dual-coil water heaters will double your onboard hot water comfort. One heating coil can be connected to the engine's cooling circuit to utilize excess engine heat. The other coil can be connected to an integrated heating system.

All water heaters are supplied with: a 1500 watt electric heating element, 6 x 16mm pipe connectors and a 6 bar pressure limiter / non-return valve.

Features :

Fresh water capacity (liter): 100.

Coolant capacity (liter): 0.5.

Engine coolant connection: G 1/2.

Fresh water connection: G 1/2.

Heating element connection: G 1 1/4.

Fresh water relief valve setting: 6 bar (87 psi).

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 12.

Capacity (Ipm): 7.6.

Pressure (bar): 2.1.

Amperage (A): 5.

L x W x H (mm): 212 x 130 x 123.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 12.

Capacity (Ipm): 13.2.

Pressure (bar): 3.1.

Amperage (A): 7.

L x W x H (mm): 212 x 130 x 123.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 12.

Capacity (Ipm): 20.

Pressure (bar): 4.2.

Amperage (A): 17.

L x W x H (mm): 229 x 147 x 132.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 24.

Capacity (Ipm): 7.6.

Pressure (bar): 2.1.

Amperage (A): 3.

L x W x H (mm): 212 x 130 x 123.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 24.

Capacity (Ipm): 13.2.

Pressure (bar): 3.1.

Amperage (A): 4.

L x W x H (mm): 212 x 130 x 123.

These pumps are designed for pressurized water systems, washing, liquid transfer, etc.

The WP type is quiet, low power consumption and can run dry without damage.

They are fully equipped with thermal protection, a non-return valve and a pressure switch.

These pumps are supplied with two 13mm elbow and two straight hose connectors and an inlet filter.

Features :

Voltage (V): 24.

Capacity (Ipm): 20.

Pressure (bar): 4.2.

Amperage (A): 10.

L x W x H (mm): 229 x 147 x 132.

To make opening and closing ILT120 lids easy and hassle-free.

A well-designed wrench to make moving stubborn lids easier.

Base tank with easy-to-screw inspection cover, made of very high-quality synthetic materials and

identical to those of rigid tanks. The wall thickness is 7mm.

Supplied with all necessary fittings, saving considerable installation time. Fixed hose connector Ø 38 mm for filling and fixed hose connector Ø 16 mm for venting. Rotating hose connector Ø 13 mm with pick-up hose for water suction.

A center point for an SAE flange pressure gauge transmitter is integrated into the casting, along with five blind bolt holes.

Features :

Tank volume (liter): 40.

Ø Filling (mm): 38.

Ø Suction (mm): 16.

Ø Vent (mm): 13.

Base tank with easy-to-screw inspection cover, made of very high-quality synthetic materials and

identical to those of rigid tanks. The wall thickness is 7mm.

Supplied with all necessary fittings, saving considerable installation time. Fixed hose connector Ø 38 mm for filling and fixed hose connector Ø 16 mm for venting. Rotating hose connector Ø 13 mm with pick-up hose for water suction.

A center point for an SAE flange pressure gauge transmitter is integrated into the casting, along with five blind bolt holes.

Features :

Tank volume (liter): 60.

Ø Filling (mm): 38.

Ø Suction (mm): 16.

Ø Vent (mm): 13.

Base tank with easy-to-screw inspection cover, made of very high-quality synthetic materials and

identical to those of rigid tanks. The wall thickness is 7mm.

Supplied with all necessary fittings, saving considerable installation time. Fixed hose connector Ø 38 mm for filling and fixed hose connector Ø 16 mm for venting. Rotating hose connector Ø 13 mm with pick-up hose for water suction.

A center point for an SAE flange pressure gauge transmitter is integrated into the casting, along with five blind bolt holes.

Features :

Tank volume (liter): 80.

Ø Filling (mm): 38.

Ø Suction (mm): 16.

Ø Vent (mm): 13.

WTKIT type connection kit for waste water only, please note not suitable for fuel tanks.

Complete with gasket and mounting flange.

Features :

Overall diameter (in mm): 156.

Diameter (in mm): 115.

Inspection hatch for waste water only, note not suitable for fuel tanks.

Ideal for metal tanks.

Features :

Cutting diameter (mm): 115.

Diameter (mm): 156.

WTKIT type connection kit for drinking water tank with inspection hatch and connectors.

Supplied with:

- An inspection hatch (WTIKIT)

- A right angle connector (RT38B) for the Ø 38 mm filling pipe

- A right angle connector (RT16B) for the Ø 16 mm water pump

- A right angle connector (RT16B) for ventilation Ø 16 mm

- Two fixing straps

- A T-piece to connect two Ø 16 mm tanks

This drinking water suction pipe can be installed on the top surface of almost any fixed tank with a maximum depth of 410 mm. Suitable for drinking water systems with a diameter of 13 mm.

Dorade box for YOGI / SAMOEN, with mushroom fan.

Note: These boxes do not fit the S type fan.

This synthetic box drains any water entering the fan and can be closed completely using the built-in stainless steel mushroom fan.

The screw-on mounting ring supplied with the fan can be easily attached to the dorade box using the supplied bolts and nuts.

Red interior hood vent. 75mm inner diameter.

The handles and rings are made of cast stainless steel. The air sleeves are adjustable and removable.

The clamping ring can be tightened by hand. A threaded ring and a bridge ring are supplied as standard.

A mosquito net and a stainless steel cover for closing the hood fan are optional.

Technical characteristics:

A (in mm): 296.

B (in mm): 125.

C (in mm): 181.

D (in mm): 22.

Free passage area (in cm²) / 122.8.

Material: Stainless steel (AISI 316).

White interior hood vent. 75mm inner diameter.

The handles and rings are made of cast stainless steel. The air sleeves are adjustable and removable.

The clamping ring can be tightened by hand. A threaded ring and a bridge ring are supplied as standard.

A mosquito net and a stainless steel cover for closing the hood fan are optional.

Technical characteristics:

A (in mm): 296.

B (in mm): 125.

C (in mm): 181.

D (in mm): 22.

Free passage area (in cm²) / 122.8.

Material: Stainless steel (AISI 316).