List of products by brand VETUS

The TWINLINE series is rated "ignition-proof," making it safe to use around a gasoline engine or in spaces where combustible gases may accumulate. These dangerous fumes can be safely extracted with TWINLINE fans, so you can start your engine with peace of mind.

This extractor fan is also ideal for simply extracting heat from your engine room, making it a valuable addition to diesel and electric powered boats. These powerful fans have a very compact housing, allowing installation in the most confined spaces.

Please note that they are not designed for continuous use and must be connected to the ship's power system.

Note: We do NOT recommend using exhaust fans to supply air to the motor(s)

principal(s).

Specifications:

• Complies with ISO 9097 Marine Standard

• The pipes can be connected to Scirocco (TWINLINE Ø 76 mm only) or Typhoon (TWINLINE Ø 76 mm and Ø 102 mm) aerators.

Technical characteristics:

A (in mm): 88.5.

B (in mm): 92.5.

C (in mm): 76.

D (in mm): 128.

Flow rate (m3/min): 5.

Inner sheath diameter (in mm): 76.

Power (in Volts): 24.

The TWINLINE series is rated "ignition-proof," making it safe to use around a gasoline engine or in spaces where combustible gases may accumulate. These dangerous fumes can be safely extracted with TWINLINE fans, so you can start your engine with peace of mind.

This extractor fan is also ideal for simply extracting heat from your engine room, making it a valuable addition to diesel and electric powered boats. These powerful fans have a very compact housing, allowing installation in the most confined spaces.

Please note that they are not designed for continuous use and must be connected to the ship's power system.

Note: We do NOT recommend using exhaust fans to supply air to the motor(s)

principal(s).

Specifications:

• Complies with ISO 9097 Marine Standard

• The pipes can be connected to Scirocco (TWINLINE Ø 76 mm only) or Typhoon (TWINLINE Ø 76 mm and Ø 102 mm) aerators.

Technical characteristics:

A (in mm): 116.

B (in mm): 119.

C (in mm): 101.6.

D (in mm): 180.

Flow rate (m3/min): 7.

Inner sheath diameter (in mm): 102.

Power (in Volts): 24.

The aerator can be screwed directly onto the hull or superstructure horizontally/vertically. Plastic base plate, water seal, 100 mm hose connection included. The free flow area is 41 cm².

The outer cover of this aerator is made of polished AISI 316 stainless steel and all other parts are made of synthetic materials. When installed, no screws are visible.

The ideal solution for engine room ventilation openings.

The aerator can be screwed directly onto the hull or superstructure horizontally/vertically. Plastic base plate, water seal, 75 mm hose connection included. The free flow area is 30 cm².

The outer cover of this aerator is made of polished AISI 316 stainless steel and all other parts are made of synthetic materials. When installed, no screws are visible.

The ideal solution for engine room ventilation openings.

This exhaust fan is intended for the extraction of heat from the engine compartment when the engines are stopped or of gasoline vapors. Ignition protected, excluding hose, conforming to marine standard ISO 9097.

A mounting bracket is provided.

Technical characteristics:

Voltage (V): 12.

Pipe diameter in mm: 102.

Capacity (m³/minute): 8.

Free passage area (cm2): 102.

A (in mm): 215.

B (in mm): 237.

C (in mm): 113.

D (in mm): 209.

This exhaust fan is intended for the extraction of heat from the engine compartment when the engines are stopped or of gasoline vapors. Ignition protected, excluding hose, conforming to marine standard ISO 9097.

A mounting bracket is provided.

Technical characteristics:

Voltage (V): 24.

Pipe diameter in mm: 102.

Capacity (m³/minute): 8.

Free passage area (cm2): 102.

A (in mm): 215.

B (in mm): 237.

C (in mm): 113.

D (in mm): 209.

Made from high-temperature resistant Navidurin® composite, this fan is capable of extracting hot air and contaminants that affect the engine at a rate of 12.2 m3/minute. This extraction rate makes it one of the fastest systems in its range on the market, capable of operating at extremely high temperatures due to the unique composite properties.

It is also protected against ignition (IP67) and complies with the marine standard ISO 9097.

Caution: We do NOT recommend using exhaust fans to supply air to the main engines!

Technical characteristics:

Voltage (V): 12.

Pipe diameter in mm: 178.

Capacity (m³/minute): 12.2.

Made from high-temperature resistant Navidurin® composite, this fan is capable of extracting hot air and contaminants that affect the engine at a rate of 12.2 m3/minute. This extraction rate makes it one of the fastest systems in its range on the market, capable of operating at extremely high temperatures due to the unique composite properties.

It is also protected against ignition (IP67) and complies with the marine standard ISO 9097.

Caution: We do NOT recommend using exhaust fans to supply air to the main engines!

Technical characteristics:

Voltage (V): 24.

Pipe diameter in mm: 178.

Capacity (m³/minute): 12.2.

This exhaust fan is intended for the extraction of heat from the engine compartment when the engines are stopped or of gasoline vapors. Ignition protected, excluding hose, conforming to marine standard ISO 9097.

A mounting bracket is provided.

Technical characteristics:

Voltage (V): 12.

Pipe diameter in mm: 76.

Capacity (m³/minute): 4.

Free passage area (cm2): 76.

A (in mm): 186.

B (in mm): 168.

C (in mm): 88.

D (in mm): 157.

This exhaust fan is intended for the extraction of heat from the engine compartment when the engines are stopped or of gasoline vapors. Ignition protected, excluding hose, conforming to marine standard ISO 9097.

A mounting bracket is provided.

Technical characteristics:

Voltage (V): 24.

Pipe diameter in mm: 76.

Capacity (m³/minute): 4.

Free passage area (cm2): 76.

A (in mm): 186.

B (in mm): 168.

C (in mm): 88.

D (in mm): 157.

Connection flange for VENT76A.

Features :

A (in mm): 120.

B (in mm): 115.

C (in mm): 106.5.

D (in mm): 46.5.

Ø F: 83.3.

Ø G: 76.

E (in mm): 106.

Connection flange for VENT102.

Features :

A (in mm): 150.

B (in mm): 141.

C (in mm): 136.5.

D (in mm): 46.5.

E (in mm): 136.

Ø F: 109.7.

Ø G: 102.

Extremely flexible suction/pressure hose for connection to the exhaust fan with steel spiral

Temperature resistance between -30º and +140ºC. Available in internal diameters of 152 and 178 mm.

Technical characteristics:

Bend radius (mm): 180.

Weight (kg): 1.09.

Inner diameter (mm): 180.

Outer diameter (mm): 186.

Pipe application: Wastewater.

Hole saw for plastic, GRP or stainless steel tanks with a diameter of 159 mm.

2-piece lashing straps 3m x 25mm with VETUS logo.

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 20.

Coolant capacity (liter): 2.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 31.

Coolant capacity (liter): 3.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 45.

Coolant capacity (liter): 5.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 55.

Coolant capacity (liter): 7.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

High-end double-walled water heater in stainless steel, AISI 316L type WHD.

While conventional water heaters use a spiral tube to heat water, these water heaters use a highly efficient double-wall principle.

Thanks to this double-walled principle, double-walled water heaters have a much larger heating surface than a conventional spiral heating tube. This means that double-walled water heaters will heat water much faster than conventional water heaters.

It comes with a 1500 watt electric heating element, 4 x 16mm hose connectors and a 6 bar pressure relief/non-return valve.

Features :

Fresh water capacity (liter): 75.

Coolant capacity (liter): 9.

Engine cooling: G 1/2.

Fresh water: G 1/2.

Electric resistance: G 1/4, 1500 Watt, 230 V.

Safety valve setting: 6 bar (87 lbs / sq.inch)

Electric heater with adjustable thermostat (40 - 80 ° C). External male thread, ISO 228/1 G1¼. The length of the screw-in element is 300 mm.

WHEL type heating elements meet low voltage requirements.

Features :

Volt (V): 120.

Watt (W): 1000.

Electric heater with adjustable thermostat (40 - 80 ° C). External male thread, ISO 228/1 G1¼. The length of the screw-in element is 300 mm.

WHEL type heating elements meet low voltage requirements.

Features :

Volt (V): 230.

Watt (W): 1500.

Electric heater with adjustable thermostat (40 - 80 ° C). External male thread, ISO 228/1 G1¼. The length of the screw-in element is 300 mm.

WHEL type heating elements meet low voltage requirements.

Features :

Volt (V): 230.

Watt (W): 1000.

Electric heater with adjustable thermostat (40 - 80 ° C). External male thread, ISO 228/1 G1¼. The length of the screw-in element is 300 mm.

WHEL type heating elements meet low voltage requirements.

Features :

Volt (V): 230.

Watt (W): 500.

Water heaters that are heated by engine coolant can supply their fresh water volume at temperatures above 90°C. In addition, it is often difficult and time-consuming to find the right temperature, which results in a loss of hot water.

Installing a thermostatic mixer prevents scalding and allows for easy adjustment of the correct temperature. This means less wasted hot water, a consistent temperature at the tap, and significant energy savings.

The mixer has a G½ thread. The temperature can be continuously adjusted between 30° and 70°C.