List of products by brand VETUS

Tank gauge for drinking water, gasoline, and diesel. Indicates the difference in liquid level every 2.5 cm for maximum accuracy.

Each length of tube contains the maximum number of reed contacts (electronic switches),

instead of the absolute minimum of three (full, half full, empty). For this reason, your tank gauges

will be able to provide maximum accuracy. The contacts are sealed and "liquid-tight".

Technical characteristics:

• Empty 300?

• Full 10?

• For 12 and 24 volts

Features :

Voltage (V): 12/24.

Length (mm): 680.

Tank gauge for drinking water, gasoline, and diesel. Indicates the difference in liquid level every 2.5 cm for maximum accuracy.

Each length of tube contains the maximum number of reed contacts (electronic switches),

instead of the absolute minimum of three (full, half full, empty). For this reason, your tank gauges

will be able to provide maximum accuracy. The contacts are sealed and "liquid-tight".

Technical characteristics:

• Empty 300?

• Full 10?

• For 12 and 24 volts

Features :

Voltage (V): 12/24.

Length (mm): 780.

This kit includes the stainless steel (AISI 316) shutter and mosquito net for all windsocks.

Set of shutters and mosquito nets for windsocks Ø 100 mm

This kit includes the stainless steel (AISI 316) shutter and mosquito net for all windsocks.

Set of shutters and mosquito nets for windsocks Ø 125 mm

This kit includes the stainless steel (AISI 316) shutter and mosquito net for all windsocks.

Set of shutters and mosquito nets for windsocks Ø 75 mm

Ventilation grille in shiny stainless steel and has anodized aluminum blades.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 360.

B = Cutout (mm): 340.

C (mm): 159.

D = Cutout (mm): 139.

E = Cutting radius (mm): R69.5.

Coverage area (cm²): 158.

Ventilation grille in shiny stainless steel and has anodized aluminum blades.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 590.

B = Cutting (mm): 5770.

C (mm): 159.

D = Cutout (mm): 139.

E = Cutting radius (mm): R69.5.

Coverage area (cm²): 283.

Ventilation grille in shiny stainless steel and has anodized aluminum blades.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 660.

B = Cutout (mm): 640.

C (mm): 159.

D = Cutout (mm): 139.

E = Cutting radius (mm): R69.5.

Coverage area (cm²): 321.

Ventilation grille in shiny stainless steel and has anodized aluminum blades.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 670.

B = Cut (mm): 650.

C (mm): 172.

D = Cutout (mm): 152.

E = Cutting radius (mm): R76.

Coverage area (cm²): 363.

Ventilation grille in shiny stainless steel and has anodized aluminum blades.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 730.

B = Cutout (mm): 710.

C (mm): 172.

D = Cutout (mm): 152.

E = Cutting radius (mm): R76.

Coverage area (cm²): 400.

Ventilation grille in shiny stainless steel and has anodized aluminum blades.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 750.

B = Cut (mm): 730.

C (mm): 198.

D = Cutout (mm): 178.

E = Cutting radius (mm): R89.

Coverage area (cm²): 503.

Ventilation grille in shiny stainless steel and has anodized aluminum blades.

The model number corresponds to the engine power for which it is suitable.

Features :

A (mm): 890.

B = Cutout (mm): 870.

C (mm): 198.

D = Cutout (mm): 178.

E = Cutting radius (mm): R89.

Coverage area (cm²): 608.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 100.

Dimensions (mm): 790*1000.

Height (mm): 270.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 100 (?).

Dimensions (mm): 1170*1490.

Height (mm): 240.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 160.

Dimensions (mm): 790*1420.

Height (mm): 270.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 220.

Dimensions (mm): 740*1040.

Height (mm): 270.

Ces réservoirs peuvent être installés facilement et rapidement- ils prennent la forme de l'espace dans lequel ils sont

placés. Souvent, ils peuvent être utilisés dans des espaces difficiles d'accès. Tous les raccords sont fournis en standard.

Le montage du raccord de sortie et le raccordement des tuyaux d'entrée et de sortie sont les seules choses à réaliser.

Fournis avec :

• Un raccord droit pour le remplissage Ø 38 mm

(monté sur le haut du réservoir)

• Un raccord coudé pour le pompage Ø 16 mm

Des raccords supplémentaires peuvent être fournis en option.

Le réservoir souple VETUS est composé de trois couches :

1. Une couche de résistance

2. Une couche de renfort

3. Une couche neutre pour le contact avec l'eau potable

Caractéristiques :

Capacité (litre) : 55.

Dimensions (mm) : 680*780.

Hauteur (mm) : 250.

These tanks can be installed easily and quickly - they take the shape of the space in which they are

placed. They can often be used in hard-to-reach spaces. All fittings are supplied as standard.

The only things that need to be done are the installation of the outlet fitting and the connection of the inlet and outlet pipes.

Supplied with:

• A straight connection for filling Ø 38 mm

(mounted on top of the tank)

• An elbow connection for pumping Ø 16 mm

Additional fittings can be supplied as an option.

The VETUS flexible tank is made up of three layers:

1. A layer of resistance

2. A reinforcement layer

3. A neutral layer for contact with drinking water

Features :

Capacity (liter): 70.

Dimensions (mm): 780*780.

Height (mm): 270.

Dorade box for TOM / CHINOOK, with mushroom fan.

Note: These boxes do not fit the S type fan.

This synthetic box drains any water entering the fan and can be closed completely using the built-in stainless steel mushroom fan.

The screw-on mounting ring supplied with the fan can be easily attached to the dorade box using the supplied bolts and nuts.

Red interior hood vent. 75mm inner diameter.

The handles and rings are made of cast stainless steel. The air sleeves are adjustable and removable.

The clamping ring can be tightened by hand. A threaded ring and a bridge ring are supplied as standard.

A mosquito net and a stainless steel cover for closing the hood fan are optional.

Technical characteristics:

A (in mm): 250.

B (in mm): 100.

C (in mm): 143.

D (in mm): 22.

Free passage area (in cm²) / 78.6.

Material: Stainless steel (AISI 316).

White interior hood vent. 75mm inner diameter.

The handles and rings are made of cast stainless steel. The air sleeves are adjustable and removable.

The clamping ring can be tightened by hand. A threaded ring and a bridge ring are supplied as standard.

A mosquito net and a stainless steel cover for closing the hood fan are optional.

Technical characteristics:

A (in mm): 250.

B (in mm): 100.

C (in mm): 143.

D (in mm): 22.

Free passage area (in cm²) / 78.6.

Material: Stainless steel (AISI 316).

Silicone wind sleeves, guaranteed to stand the test of time. Silicone is a highly flexible synthetic material with an operating temperature range of -100°C to +200°C.

It is UV resistant and will not fade, so it will always look like new.

The air sleeves are removable. The clamping rings and coupling bridge flanges are made of hard synthetic material. The internal color is red (RAL3020). A mosquito net and a stainless steel (AISI 316) cover plate for sealing can be supplied as an option.

Replaces reference DONALD2.

Technical characteristics:

A (in mm): 100.

B (in mm): 75.

C (in mm): 127.

D (in mm): 11.

Free passage area (in cm²): 44.2.

Available in 3 sizes with vertical opening and one with horizontal opening.

Silicone wind sleeves, guaranteed to stand the test of time. Silicone is a highly flexible synthetic material with an operating temperature range of -100°C to +200°C.

It is UV resistant and will not fade, so it will always look like new.

The air sleeves are removable. The clamping rings and coupling bridge flanges are made of hard synthetic material. The internal color is red (RAL3020). A mosquito net and a stainless steel (AISI 316) cover plate for sealing can be supplied as an option. It has a screwed synthetic flange that is easily removable.

Replaces the DONALDS reference.

Technical characteristics:

A (in mm): 115.

B (in mm): 75.

C (in mm): 125.

D (in mm): 25.

Free passage area (in cm²): 44.2.

Available in 3 sizes with vertical opening and one with horizontal opening.

The TWINLINE series is rated "ignition-proof," making it safe to use around a gasoline engine or in spaces where combustible gases may accumulate. These dangerous fumes can be safely extracted with TWINLINE fans, so you can start your engine with peace of mind.

This extractor fan is also ideal for simply extracting heat from your engine room, making it a valuable addition to diesel and electric powered boats. These powerful fans have a very compact housing, allowing installation in the most confined spaces.

Please note that they are not designed for continuous use and must be connected to the ship's power system.

Note: We do NOT recommend using exhaust fans to supply air to the motor(s)

principal(s).

Specifications:

• Complies with ISO 9097 Marine Standard

• The pipes can be connected to Scirocco (TWINLINE Ø 76 mm only) or Typhoon (TWINLINE Ø 76 mm and Ø 102 mm) aerators.

Technical characteristics:

A (in mm): 88.5.

B (in mm): 92.5.

C (in mm): 76.

D (in mm): 128.

Flow rate (m3/min): 5.

Inner sheath diameter (in mm): 76.

Power (in Volts): 12.

The TWINLINE series is rated "ignition-proof," making it safe to use around a gasoline engine or in spaces where combustible gases may accumulate. These dangerous fumes can be safely extracted with TWINLINE fans, so you can start your engine with peace of mind.

This extractor fan is also ideal for simply extracting heat from your engine room, making it a valuable addition to diesel and electric powered boats. These powerful fans have a very compact housing, allowing installation in the most confined spaces.

Please note that they are not designed for continuous use and must be connected to the ship's power system.

Note: We do NOT recommend using exhaust fans to supply air to the motor(s)

principal(s).

Specifications:

• Complies with ISO 9097 Marine Standard

• The pipes can be connected to Scirocco (TWINLINE Ø 76 mm only) or Typhoon (TWINLINE Ø 76 mm and Ø 102 mm) aerators.

Technical characteristics:

A (in mm): 116.

B (in mm): 119.

C (in mm): 101.6.

D (in mm): 180.

Flow rate (m3/min): 7.

Inner sheath diameter (in mm): 102.

Power (in Volts): 12.